With TF-M enabled the storage_partition can be used as memory that is
known to be configured as non-secure flash region.
The slot1_ns_partition partition is only correct when TF-M is built
with BL2 enabled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Enable code coverage for debug.coredump.drivers.api.* test suite
adding custom fatal error handler to dump code coverage data
when the test halts as expected.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Add an optional actual-key-mask property to filter out key combinations
that are not implemented in the actual keyboard matrix.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The driver has some non trivial macro setup, add another two test cases
so those gets build tested as well.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add support for testing the `dma_emul` driver which simply uses
software emulation (i.e. asynchronous memcpy in a workqueue) for
performing DMA operations.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
The LPS28DFW is an ultracompact, piezoresistive, absolute pressure sensor.
Compared to the LPS22DF, the LPS28DFW is waterproof and has a Dual FS
capability and does not have SPI. This commit extends the LPS22DF driver to
be compatible with the LPS28DFW device.
Signed-off-by: Jonas Remmert <j.remmert@phytec.de>
Fix the test filter, to allow any POSIX arch board,
instead of just native_posix, as this test runs fine
on all of them.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch the native overlays to be based on the native_sim one,
and set native_sim as the integration_platform
instead of native_posix
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add tests for line splitting in console echo and console_getline()
Signed-off-by: Jakub Michalski <jmichalski@internships.antmicro.com>
Signed-off-by: Mateusz Sierszulski <msierszulski@antmicro.com>
Added an overlay file for mimxrt1170_evk_cm33 to test rtio
with the spi_loopback test.
Added mimxrt1170_evk_cm7 to the testcase.yml file
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
The option is long gone, PR was sitting for a long time so this got
merged and now it's failing compliance check.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This testsuite exercises a number of things. Namely
* `mutable` devices (i.e. those backed in SRAM)
* `uart_emul` support for interrupt mode (receive only)
* `devmux` capabilities of multiplexing several uarts
* switching the system console between several uart backends
Testing Done:
```
west build -p auto -b qemu_riscv64 -t run \
tests/drivers/console_switching/
...
*** Booting Zephyr OS build zephyr-v3.4.0-3988-gaaefb2d764ea ***
Running TESTSUITE console_switching
================================================================
START - test_read
read "Hello, uart_emul0!" from uart_emul0
read "Hello, uart_emul1!" from uart_emul1
read "Hello, uart_emul0!" from uart_emul0
read "Hello, uart_emul1!" from uart_emul1
PASS - test_read in 0.005 seconds
================================================================
START - test_write
wrote "Hello, uart_emul0!" to uart_emul0
wrote "Hello, uart_emul1!" to uart_emul1
wrote "Hello, uart_emul0!" to uart_emul0
wrote "Hello, uart_emul1!" to uart_emul1
PASS - test_write in 0.003 seconds
================================================================
TESTSUITE console_switching succeeded
------ TESTSUITE SUMMARY START ------
SUITE PASS - 100.00% [console_switching]: pass = 2, fail = 0,...
- PASS - [console_switching.test_read] duration = 0.005 seconds
- PASS - [console_switching.test_write] duration = 0.003 seconds
------ TESTSUITE SUMMARY END ------
===============================================================
PROJECT EXECUTION SUCCESSFUL
```
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Enable all these tests which run in native_posix in native_sim,
Switch from native_posix to native_sim as default test platform
And switch native_posix overlays to native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable this test which run in native_posix_64 in native_sim_64,
And switch native_posix_64 overlays to native_sim_64.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This driver assumed the ivshmem-v2 output sections would be mapped
contiguously, which is no longer true.
Modify eth_ivshmem to treat each output section independently
Signed-off-by: Grant Ramsay <gramsay@enphaseenergy.com>
Several scenarios in this test require specific external flash chips
to be connected to the nRF52840 DK. Specify proper fixture for them
so that they are not performed on the board without those required
external components connected.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This is a follow-up to commit 7a83724e0f.
This overlay uses an alternative connection (via spi2) for the external
flash present on the nRF52840 DK and it needs to use one of the QSPI
pins as GPIO, to get CS line control in the SPI communication. To make
it possible, that GPIO must be removed from those marked as reserved.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Switch from native_posix to native_sim as default test platform
And switch overlays to native_sim.
For gpio_enable_disable_interrupt, also filter with
platform_allow to save time, as the dt filter requires cmake
to be run, but only the platforms with overlays provided
by the test can be run.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch from native_posix to native_sim as default test platform
And switch overlays to native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch from native_posix to native_sim as default
test platform, switch overlays to native_sim.
For the HW test, filter whole posix arch to speed
up twister run.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch from native_posix to native_sim as default test platform.
For test with overlays, switch overlays and platform_allow from
native_posix to native_sim.
For tests without overlays, enable also in native_sim, and
set native_sim as integration platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch from native_posix to native_sim as default test platform
And switch overlays to native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Clean up few build all device instances to use the test_gpio node and
different gpio numbers. Makes them somewhat more representative of what
an actual instance would look like.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
