Tests will be restructured in a future commit. Temporarily disabled to
partition the changes to allow tests to be a separate PR.
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
This removes the callbacks from capabilities. The callbacks are used for
unicast server role only, while the capabilities are used for the
broadcast sink role as well. Thus the callbacks can be removed as there
is another bt_audio_unicast_server_cb API that is specific for unicast
server role.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Allow ZEPHYR_MODULES to be specified to support non-west builds
Return the error code when/if a build fails instead of always 0
Signed-off-by: Troels Nilsson <trnn@demant.com>
The commit adds proxy mix advertiser test that checks
mix of transmission between pb gatt, proxy and adv bearers.
The exact test scenario is described in proxy_mixin.sh file.
Additionally, the separate test configuration has been added.
All bsim mesh tests have been implemented not considering that
GATT frames are possible if PB-GATT or GATT Proxy are enabled.
The solution to avoid this misimplementation is to create
the separate configuration for tests with enabled
PB-GATT and GATT Proxy features. The commit adds this as well.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Signed-off-by: Artur Dobrynin <artur.dobrynin@nordicsemi.no>
Adds Kconfig option for the Mesh Shell Health server.
The shell implementation of Health Server test commands is
dependent on the user adding and initializing the shell Health
Server instance in their application to make the commands functional.
To prevent any confussion about how these commands work, a Kconfig
option has been added to allow conditional compilation of these
commands. In this way the user must actively enable this feature, making
the conditional requirements more clear.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Some tests assume that if IUT accepted HCI_LE_Set_Data_Length command
than HCI_LE_Data_Length_Change event will always be sent. This is not
the case anymore as HCI_LE_Data_Length_Change is sent only if effective
parameters changed.
Those tests should be re-enabled when EDDT implementation is updated.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
LE Write Suggested Default Data Length and LE Set Data Length commands
are suggestions from host and should be validated only as per HCI
specification regarding internal setting of LLCP.
LLCP is allowed to use other values if needed.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
If a device sends an MTU that is bigger than our maximum tx buffer size,
that could cause assertion failures down the line.
This PR limits it to the maximum we support (CONFIG_BT_L2CAP_TX_MTU).
The issue has been observed with a gatt discovery procedure, but is likely
present in other places in att.c.
To reproduce it, we need two zephyr shell devices, with one having a larger
MTU than the other:
- connect
- do data length update to the bigger MTU
- set security to 2, EATT channels get connected
- launch a gatt discovery from the device with the larger MTU
- observe kernel panic on the other device when it attempts to add too much
memory to a net buf.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
The chan_opt field was not set, and on some platforms it ended up with
an invalid value. Explicitly set the field on all GATT parameter structs
and make the discovery params static.
Fixes#50520
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
With introduction of refactored LLCP was also introduced an error
re. calculation of initial slot reservation in connection setups.
Due to this error a bigger slot was reserved, leading to failure due to
connection overlaps in multiple.sh test.
Also the removal of this 'overhead' in slot reservations calls for
bigger time-allowance for l2pcap_stress test.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Remove the support for caching ASEs on release.
This is mainly due to the 2-stage design in Zephyr: We
have the bt_audio_stream and the bt_audio_ep, where the
the latter represents an ASE in most cases.
However, once the endpoint goes into the codec configured
state, then a stream must be bound to it. This would be fine
(although a stream is technically not established at this point),
except that a stream is also, for unicast, specified for a
specific ACL. Once the ACL disconnects, the stream technically
becomes invalid, and if the stream is invalid, so is the endpoint.
Based on that, there's no reason (or even option) to keep the
endpoint in a codec configured state, as it would not
have a valid stream associated with it.
If we want to support an ASE going into the codec
configured state on ASE release (or ACL disconnect),
the relationsship between ASEs and streams needs to
be redefined.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Uploaded the Bluetooth Launch Studio generated projects and
ICS files. These files can be imported into Bluetooth users
Launch Studio, with their Bluetooth SIG account, and
generate the test plans.
This file provide detailed information in Launch Studio of
the supported Core features, Host Services and Profiles,
and Audio services.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This callback allows use-cases where the SDU is much larger than the l2cap
MPS. The stack will then try to allocate using this callback if specified,
and fall-back on using the buffer's pool (previous behavior).
This way one can define two buffer pools, one with a very large buffer
size, and one with a buffer size >= MPS, and the stack will allocate from
that instead.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This test reproduces more-or-less #34600.
It has a central that connects to multiple peripherals, opens one l2cap CoC
channel per connection, and transmits a few SDUs largely exceeding the MPS
of the channel.
In this commit, the test doesn't pass, but when it passes (after the
subsequent commits), error and warning messages are expected from the
stack, as this is not the happy path.
We can later debate on whether these particular error messages should be
downgraded to debug.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Add bsim tests to check tx callback behavior for advertiser.
Feature coverage:
TX Complete callback execution
Callback order
Packets are freed before the end callback is called
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Unit test project for bt_buf_get_cmd_complete().
This part of subsys/bluetooth/host/buf.c unit testing
Signed-off-by: Ahmed Moheb <ahmed.moheb@nordicsemi.no>
Add a Kconfig for Advertising Data Chaining in Extended and
Periodic Advertising, permitting AD data lengths of upto
1650 bytes. The implementation is experimental and needs
further testing.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix BT_CTLR_ADV_DATA_LEN_MAX and other Kconfig dependencies,
and clean up the use of PDU_AC_LL_SIZE_MAX which is used to
allocate scratch packet to be atleast able to accommodate
the minimum 31 bytes AD data such that it is sufficient to
transmit and/or receive scan response PDUs when either
broadcaster or observer alone is supported.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The current implementation of provisioning features is dependent on CDB
to compile, which is reflected poorly in the Kconfig options for mesh.
This commit alters the Kconfig options for provisioning to be dependent
on the CDB option to compile.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This PR adds a `*_cli_*` infix to the Config Client API to match
the changes in Health Client. The old API is marked as deprecated.
Signed-off-by: Michal Narajowski <michal.narajowski@codecoup.pl>
Follow-up: #49243, #48732
With the introduction of Kconfig for unit_testing board and setting
ZTEST_NEW_API in testcase.yaml, the need and support of setting this
directly in CMakeLists.txt is obsolete.
Remove the code line.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The board overlays were added to increase the baud rate,
which was useful when scanning when there were many devices.
For that scenario it is probably better to use the
scan filters.
The changed baudrate in the overlays made it harder
to easily switch between e.g. the BT shell and other
applications, as the default baudrate is different, and
you'd need to restablish a connection to the boards UART
to handle the changes.
The other values in the overlays also do not really
provide any advantage to have for just the shell
application.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Regression test for an issue where in cases where sending a buffer over
L2CAP failed, the buffer user data was not restored.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
Make extended advertiser as deafult advertiser for
general and persistent bsim BLE Mesh tests.
Leave legacy advertiser as default advertiser for
low latency bsim BLE Mesh tests.
The legacy advertiser provides quite poor performance.
Even more, it is not fully compatible with specification
since might spur more frames occasionally then requested.
This is fundamental issue since it cannot stop an advertisement
in exact time. The extended advertiser doesn't have such problem.
However, it is not well tested yet. Since extended advertiser is
not experimental anymore in both controller and host this is
the right time to make ext advertiser as a default in Mesh either.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Re. peripheral phy update procedure: UNKNOWN_RSP from central was not
handled, leading to stall of procedure and subsequent procedure timeout
Proper handle and unit test for case added.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Added BabbleSim test to reuse the Broadcaster Multiple and
Oberver samples to verify multiple advertising sets and
transmission of Extended Advertising Chain PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Beacon test had trick for extended advertiser. That has been added as
conditional compilation. Additionally, waiting beacon procedure
waits for 1 more second to avoid boundary case since
the extended advertiser is more precisionive.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Extended advertiser has better latency without any delays than legacy one.
If couple of config model commands start sequently then
the first ones are received normally but the next one are transmitted in
parallel with leftover communication (retransmissions) of the previous one.
That causes collisions and broken test despite the functionality itself
is ok. Adding delays between commands solves crossovering tx time.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
mesh extended advertiser is not well tested. As the first step
the mesh babblesim tests should pass on extended advertiser as well
as on legacy advertiser. Minor fix to avoid lpn collisions in
friendship tests with multi lpns.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The function will be used to update the RSI value. The returned value
can be later used in advertisement data for set identification. This
removes the need of specific bt_csis_advertise function so that the user
can call the API to generate new RSI once needed (e.g. on RPA change).
This allows the user to manage the advertisement data to fit it's needs.
< HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6
Extended advertising: Disabled (0x00)
Number of sets: 1 (0x01)
Entry 0
Handle: 0x00
Duration: 0 ms (0x00)
Max ext adv events: 0
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Advertising Enable (0x08|0x0039) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 33
Handle: 0x00
Operation: Complete extended advertising data (0x03)
Fragment preference: Minimize fragmentation (0x01)
Data length: 0x1d
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
Unknown EIR field 0x2e: 16e61d64dc45
Name (complete): audio test shell
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Advertising Data (0x08|0x0037) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Advertising Set Random Address (0x08|0x0035) plen 7
Advertising handle: 0x00
Advertising random address: 4E:21:29:F8:94:93 (Resolvable)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Advertising Set Random Address (0x08|0x0035) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6
Extended advertising: Enabled (0x01)
Number of sets: 1 (0x01)
Entry 0
Handle: 0x00
Duration: 0 ms (0x00)
Max ext adv events: 0
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Advertising Enable (0x08|0x0039) ncmd 1
Status: Success (0x00)
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The bluetooth/controller/ctrl_cte_req wrongly defaulted to old Ztest API
after the introduction of the new unit_testing board.
Enforce use of CONFIG_ZTEST_NEW_API to get test working again.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
