This commit replaces the outdated link to the TH02 sensor datasheet
with the link to the Si7005 datasheet (the original part name of TH02
is Si7005).
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This adds some skeleton files to enable using LSM6DSO on I3C bus
while still acting like a I2C device. The new files here are
simply to provide a way to have overlay for each board that
would not conflict with the pure I2C one. Also this is set to
build only because it require external hardware that is not
necessary on the board being tested.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds some skeleton files to enable using LPS22HH on I3C bus.
This still uses the C source file for I2C. The new files here
are simply to provide a way to have overlay for each board that
would not conflict with the I2C one. Also this is set to build
only because it may require external hardware that is not
necessary on the board being tested.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
https://github.com/zephyrproject-rtos/zephyr/pull/49068 fixed units
displayed by the sample from dps to rad/s but did not update the
sample twister regex filter.
Fix the filter as well to allow testing in CI.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
-In order to allow non regression of trigger mode in CI, add
a dedicated configuration for this mode
-Fix regex
-Use a filter on compat rather than using a fixture
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Many device pointers are initialized at compile and never changed. This
means that the device pointer can be constified (immutable).
Automated using:
```
perl -i -pe 's/const struct device \*(?!const)(.*)= DEVICE/const struct
device *const $1= DEVICE/g' **/*.c
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
It is frequent to find variable definitions like this:
```c
static const struct device *dev = DEVICE_DT_GET(...)
```
That is, module level variables that are statically initialized with a
device reference. Such value is, in most cases, never changed meaning
the variable can also be declared as const (immutable). This patch
constifies all such cases.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The sensor driver API specifies gyroscope units in radians/second, not
degrees/second. Fix the lsm6dso sample application printk string to
display the correct units.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
The accel_polling sample application supports the adxl372 driver, so we
can remove this redundant driver-specific sample.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
The accel_polling sample application supports the adxl362 driver, so we
can remove this redundant driver-specific sample.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Add a polling sample for 3-Axis accelerometers.
This sample demonstrates how to data fetch and print to the console.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Sensor Kconfig sybmols should be enabled if CONFIG_SENSOR=y
and the devicetree node for the sensor is enabled. We can
remove explicitly enabling specific sensor drivers in .conf
files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Update sample to use DEVICE_DT_GET_ONE to remove usage of
device_get_binding. Additionally simplfy the sample to
just access a single TH02 device.
Signed-off-by: Kumar Gala <galak@kernel.org>
Add shield support for Panasonic AMG88xx sensor and
remove app.overlay from amg88xx sample.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The sensor shell can handle / does everything this sample does so just
remove the sample in favor of sensor shell.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding. This
is more generic than the hardcoded string that was being used.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding. This
is more generic than the hardcoded string that was being used.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Also, Removed 'lsm6dso' from board & sample yaml's and move to just
filtering based on devicetree compat.
Signed-off-by: Kumar Gala <galak@kernel.org>
Following zephyr's style guideline, all if statements, including single
line statements shall have braces.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds a sample for the maxim ds18b20 1-wire temperatue
sensor in a single-drop bus configuration.
Includes overlay files for nucleo_g0b1re und nrf52840dk_nrf52840 with
the required open drain configuration.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as we
work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
The magn_polling sample application now supports the hmc5883l driver, so
we can remove this driver-specific sample.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
The magn_polling sample application now supports the bmm150 driver, so
we can remove this driver-specific sample.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Extends the magn_polling sample application to support additional
magnetometer drivers. This is a first step towards reducing the number
of driver-specific sensor sample applications.
Integration platforms were selected to exercise different magnetometer
drivers.
Tested on hardware with the following configurations:
- fxos8700 driver with the on-board sensor on the frdm_k64f board
- lis2mdl driver with a x_nucleo_iks01a3 shield attached to a frdm_k64f
board
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
This new application is monitoring the Vbat in Volts
from the internal ADC.
Running on the nucleo_g071rb and nucle_wb55rg boards.
Vref is a property of the ADC.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Some of the Panasonic's evaluation boards have limited amount of pins.
So not all arduino pins can be occupied and not all shields are
compatible.
Signed-off-by: Steffen Jahnke <steffen.jahnke@eu.panasonic.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as we
work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as we
work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
