Kconfig options now belong to the Kconfig domain, therefore, the
:kconfig:option: role needs to be used.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
A user may want to control message parameters (for example, delay
parameter) on every retransmission of a published message (for example,
see section 1.4.1 of the mesh model specification). This is essential
for lighting messages as time gap between messages retransmitted via
the publish-retransmit mechanism introduces unwanted jitter/pop-corn
when such retransmissions are received by a large 'group' of lights.
This commit adds an option to `struct bt_mesh_model_pub` to make the
access layer call `bt_mesh_model_pub.update` callback on every
retransmission. This also addes few macros and functions that can be
used for further calculations.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
The mesh shell module owns the composition data for the shell
application, which makes it impossible to use it outside of the
application itself. To support the shell as a generic debugging
component that can be added to any application, we have moved the
composition data out of shell.c, and into the application.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
THis patch fixes multiple issues when referencing to the C domain. In
some cases there were typos (e.g. missing :), in some others no domain
syntax was used for referencing, etc.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Align the capitalization of the term "Bluetooth Mesh" to Bluetooth mesh"
in the documentation. This is done to to match the new updated naming
convention done in Bluetooth SIG. In the upcoming spec versions, it its
used "Bluetooth mesh" with the lower case convention.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
The current approach with storing RPL by timeout doesn't solve all
issues as the node may loss power before the timer is fired.
In addition to that this may wear out flash quickly if short timeout is
used.
This change adds an API to store the pending RPL entry upon user
request. Additional Kconfig option allows to completely disable timer
so that the whole storing relies on the user.
The mesh stack still stays responsible for outdating RPL entries in case
of IV Index update as this happens implicitly for the user.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This commit allows an unprovisioned device to exchange its public key
using out-of-band techology (see MeshPRFv1.0.1, table 5.19 and section
5.4.2.3).
For in-band public key exchange, the mesh stack uses HCI commands to
generate public and private keys, and DH key. This, however, doesn't
work for OOB public key exchange since there is no command to generate
DH key with a private key provided by an application. Therefore, this
commit adds direct usage of TinyCrypto into the mesh stack for DH key
generation for OOB public key support.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
The implementation of blocking calls is common for all the client
models.
This change reduces the code duplication by introducing new API that
helps to manage acknowledged messages.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Moves mesh feature configuration to a separate module, deprecating the
bt_mesh_cfg_srv structure. The initial values for the features should
now be enabled through KConfig, where new config entries have been added
for each feature.
This removes the upward dependency on the config server from the core
stack, and makes the config server a pure frontend for the configuration
states, as all spec mandated behavior around the feature states is now
encapsulated.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Adds public documentation for the Heartbeat feature in a separate page
under Bluetooth Mesh.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Those APIs are used for deleting appkey, unbinding an application
from SIG model, unbinding an application from vendor model on the
target node, with matching shell command.
Signed-off-by: YanBiao Hao <haoyanbiao@126.com>
The Health models' shell documentation was mistakenly labeled Heartbeat
Client and Heartbeat Server, and the Heartbeat configuration commands
were mistakenly categorized under these sections.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Adds a Config Client API for deleting netkeys on the target node, with
matching shell command.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Some macros were using :c:func: and :cpp:func: which forbids Breathe
from resolving those symbols. Update to :c:macro: for proper resolution.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Sphinx>=3.0 includes the `struct` role in the C domain, which provides a
specific way to link to structs, while the old :c:type: role should be
primary used to typedefs. Update existing references, using :c:type:,
:cpp:type: or emphasized symbols that point to structs to use the new
role.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Following the change to use the C domain for parsing, update all
existing :cpp:func: references to :c:func:. Remove the parentheses as
well, if used, because they are not needed, this is already known to be
a function, and how it is displayed in the documentation later is a
semantic decision done by the output builder.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Adds a high-level documentation page for the Bluetooth Mesh Shell
subsystem, documenting all available commands and their parameters.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Struct members are not always documented in the zephyr online HTML
documentation. Enable it for all Bluetooth related documentation
groups.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Name all subsystem reference consistently with an '_api' postfix and
clean up naming and folder structure in some cases.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit complements documentation of Zephyr HCI VS
commands. In particular, it documents the newly introduced
commands
- BT_HCI_OP_VS_WRITE_TX_POWER_LEVEL
- BT_HCI_OP_VS_READ_TX_POWER_LEVEL
These provide HCI-level control over the Tx power of the
BLE radio on a per role/connection basis.
The functionality is enabled upon the Kconfig advanced configuration
triggered by
- BT_CTLR_TX_PWR_DYNAMIC_CONTROL
depending on the enablement of Zephyr HCI vendor-specific command
extensions.
Signed-off-by: Andrei Stoica <stoica.razvan.andrei@gmail.com>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Adds a deeper hierarchy to the Bluetooth Mesh documentation by moving
the modules in separate pages with a brief description of the concepts
in each module.
Adds the full list of specification defined Health model faults.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Callbacks called from the RX thread may block, but should avoid doing
it for long periods of time.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
