Names of some testcases are duplicated in another files.
This change rename duplicated testcases.
Signed-off-by: Katarzyna Giadla <katarzyna.giadla@nordicsemi.no>
So far LOG_DBG() was used inside debug hook for mbedTLS library. This meant
that it was hard to distinct log messages by simply looking at the log
level number, even though Zephyr logging subsystem supports colorful logs
depending on log level.
Choose an appropriate Zephyr LOG_*() macro based on log level coming from
mbedTLS library. Remove log level number from formatted log messages, as it
is now redundant.
One controversial thing about this change is that mbedTLS' "2 State change"
log level is mapped to Zephyr's "warning" log level. Those are not really
warnings in real life, but rather informational messages. However, using
"warning" log level for those allows to clearly distinguish between "2
State change" and "3 Informational" debug messages from mbedTLS.
Additionally, mbedTLS debug message implementation does not seem to be safe
to use in production, so keeping in mind MBEDTLS_DEBUG will be enabled just
during debugging phase, printing "2 State change" logs as warnings should
not be a big deal.
Set default MBEDTLS_DEBUG_LEVEL value depending on selected Zephyr logging
module level, so that only single option needs to be configured in
application project.
Remove prompt for MBEDTLS_DEBUG_LEVEL, so that interactively (e.g. via
menuconfig) adjusting MBEDTLS_LOG_LEVEL will always result in automatically
updating MBEDTLS_DEBUG_LEVEL option. This is to prevent so called "stuck
symbol syndrome".
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Explicitly set the newly add public_network and iq_inverted settings
in lora_modem_config in the lora send and receive samples.
Signed-off-by: Tim Cooijmans <timcooijmans@gmail.com>
code to demonstrate the utilization of assymetric
dual core infrastructure based on soft-IPM implementation.
Signed-off-by: Felipe Neves <felipe.neves@linaro.org>
Partially revert commit 0028e9733295316d152eba07bf56677d83f4b1b5.
Timeout for tests/posix/common must be still increased for slow
platforms (previously was 120 sec).
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
Now that ethernet drivers are enabled based on devicetree we can
remove any cases of them getting enabled by proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Because 1-wire drivers no longer use depends on serial/i2c, but select
the Kconfig for the bus they depend on, several overlays can be removed.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Now that video drivers are enabled based on devicetree we can
remove any cases of them getting enabled by proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Now that audio drivers are enabled based on devicetree we can
remove any cases of them getting enabled by proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Update lvgl for devicetree updates to use zephyr,keyboard-scan.
Remove Kconfig symbol (LV_Z_POINTER_KSCAN_DEV_NAME) that don't exist
anymore since these values are coming from devicetree.
Signed-off-by: Kumar Gala <galak@kernel.org>
Introduce zephyr,keyboard-scan chosen node property to point to the
node that implements the default KSCAN device. This is similar to
the zephyr,display property.
We switch over the samples to utilize the new property instead of
kscan0 alias.
Signed-off-by: Kumar Gala <galak@kernel.org>
espi saf node is not enabled in mec15xxevb_assy6853.dts so the sample
will fail to build. For now disable CONFIG_ESPI_SAF to get the sample
to build.
Signed-off-by: Kumar Gala <galak@kernel.org>
Now that eeprom drivers are enabled based on devicetree we can
remove any cases of them getting enabled by proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Add a sample to demonstrate use of (LP)U(S)ART with wakeup capability
This sample is provided with 2 configurations
- nucleo_wb55rg: Basic configuration that could be exercised in CI
- stm32l562e_dk: "Full feature" configuration that require some set up
configuration (be able to display console from lpuart) and allows to
achieve lowest power consumption.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Although it is possible to simply use the interface number,
it has proven convenient to use the names for the interfaces
in the samples.
Migrate to DEVICE_DT_NAME().
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Adding configuration to run the watchdog sample application
on the stm32 boards through 2 common overlay files:
one for running on the IWDG one for WWDG, if compatible.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Having the LED device enabled in devicetree will now get the driver
enabled by default when CONFIG_LED=y is set. So we can remove
setting driver enabling Kconfig values in various .conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Enable Zephyr device runtime power management mechanisms in Intel SSP
driver. This allows Zephyr to track usage reference for power
domain gating.
Signed-off-by: Krzysztof Frydryk <krzysztofx.frydryk@intel.com>
All IEEE 802.15.4 tests/samples use DT-based filter now, so the
ieee802154 tag can be deleted.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove NET_CONFIG_IEEE802154_DEV_NAME in favor of DT based choice using
zephyr,ieee802154.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove usage of CONFIG_NET_CONFIG_IEEE802154_DEV_NAME as it now works
with DT based choice.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove Kconfig choice for IEEE802154. In this case, there's no in-tree
board, so there's no overlay or board to be updated.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use the choisen zephyr,ieee802154 from DT as
CONFIG_NET_CONFIG_IEEE802154_DEV_NAME is being phased out.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use the choisen zephyr,ieee802154 from DT as
CONFIG_NET_CONFIG_IEEE802154_DEV_NAME is being phased out.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Make a library out of the zperf shell sample. This makes to enable the
module in any application, not only the dedicated sample.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Exclude the non-secure TF-M application from being built by TF-M.
This also stops the building of the tfm_ns_api library that we were
linking against.
This library is defined by the tf-m regression tests.
Add the installed interface source files exported by the TF-M build
system compile them in the zephyr build system.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
RT1050 and RT1060 were selecting an invalid number of RX/TX buffers
(below the allowed default). Raise this value for the gptp sample.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
enable hardware acceleration of ethernet checksum calculation for
RT1050 and RT1060
Performance change (as tested with iperf on RT1050)
TCP RX: 50.6Mbps->52.4Mbps
TCP TX: 49.5Mbps->50.2Mbps
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Use systick timer for RT1050 to provide better performance than low
frequency GPT timer
Performance change (as tested with iperf on RT1050)
TCP RX: 49.1Mbps->50.8Mbps
TCP TX: 40.8Mbps->46.2Mbps
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Have the display enabled in devicetree will now get the driver
enabled by default when CONFIG_DISPLAY=y is set. So we can remove
setting driver enabling Kconfig values in various .conf and
defconfig files.
Signed-off-by: Kumar Gala <galak@kernel.org>
The accel_polling sample application supports the adxl372 driver, so we
can remove this redundant driver-specific sample.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
The accel_polling sample application supports the adxl362 driver, so we
can remove this redundant driver-specific sample.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
This defaults the TF-M regression tests to isolation level 2.
It is set in order to showcase a more secure configuration
by default. The default behavior of the sample is changed in
the prj.conf file. The yaml file which includes the test cases
enables testing for the three configurations: the library mode,
the IPC mode isolation level 1 and the IPC mode isolation level 2.
Signed-off-by: Georgios Vasilakis <georgios.vasilakis@nordicsemi.no>
Default size of BT_RX_STACK_SIZE 1024 is not enough for this sample.
Increase it to prevent stack overflow.
Signed-off-by: Pirun Lee <pirun.lee@nordicsemi.no>
The preferred ipc service on NRF platforms is ipc_service. Remove
configuration for rpmsg_service and just utilize ipc_service.
Signed-off-by: Kumar Gala <galak@kernel.org>
Building for native_posix_64 exposes faulty format strings.
Changes in this commit also ensure that the shell code gets built in CI,
thus this kind of problem can not be introduced again later on.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Remove sample as its only supported on one platform, should really
utilize the ipc subsystem, and so forth.
For now its better to drop it and when we have something better we
can add that.
Signed-off-by: Kumar Gala <galak@kernel.org>
All IEEE 802.15.4 drivers are now automatically enabled if they are
'okay' in DT and all of its dependencies are 'y', including
CONFIG_IEEE802154. This means individual driver enablement is not
necessary anymore in Kconfig.defconfig files or samples/tests. Boards
need to still make sure any dependencies are enabled, e.g. SPI bus in
some cases.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The magic_want sample requires I2C bus to be enabled (used sensor is
connected to the bus).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
