TC "test_single_shot_alarm_notop" is failing because there were 2 ISR
callbacks instead of one. this is because of invoking
ifx_cat1_counter_set_int_pending incorrectly. Updated
ifx_cat1_counter_set_alarm to fix this
Signed-off-by: Sreeram Tatapudi <sreeram.praveen@infineon.com>
Since 3a197934fc
main() should be int main(void) instead of void main(void)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add an optional compare buffer to check each byte. If the byte differ
the read value will be printed as an error.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Add an optional compare buffer to check if bytes read
match a provided buffer and print an error if they differ.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
This board is a relatively inexpensive development kit for USB-PD
controllers, using an UPD301C controller.
This Zephyr config includes support for:
* UART (present on he debug header of the board), tested with the
hello_world sample application;
* the one standalone LED (CAP_MIS), tested with the blinky sample
application;
* the rotary encoder (PDO_SEL), via ADC, tested with the adc sample
application;
* the current sense amplifier (I_SENSE), currently untested;
* the SPI bus, connected internally in the UPD301C to the UPD350;
* the I2C bus, exposed on the debug header, currently untested.
Note that the drivers.uart.async_api.rtt has to be disabled, as it is
for other m0 boards with no dma or it fails to build.
Signed-off-by: Diego Elio Pettenò <flameeyes@meta.com>
Add support for apollo4p_evb to the counter alarm sample.
Signed-off-by: Mateusz Sierszulski <msierszulski@antmicro.com>
Signed-off-by: Maciej Sobkowski <msobkowski@antmicro.com>
Add overlays for esp32s2, esp32s3, esp32c3 based boards, which
has RGB led assembled. Those boards are capable of driving the
RGB led using SPI. The default MOSI idle level is different
to how DI driver expect it to be.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Some boards may have less LED child nodes in the DT than the maximum
number of LEDs supported by the chipset. For these boards, the channel
test must skip the missing LEDs when preparing the color buffer and not
exit in error due to missing info.
Also, some boards may have a color mapping that is different from RGB
and this mapping should be used when providing the buffer to
led_set_color().
Signed-off-by: Mathieu Anquetin <mathieu.anquetin@groupe-cahors.com>
Add support for LP5009, LP5012, LP5018 and LP5024 devices which only
differ by the number of LEDs they can control.
Also, update application sample to run on all these new supported
devices.
Based on initial work from:
- Marek Janus <marek.janus@grinn-global.com>
- Rico Ganahl <rico.ganahl@bytesatwork.ch>
Signed-off-by: Mathieu Anquetin <mathieu.anquetin@groupe-cahors.com>
This watchdog doesn't allow to stop on CPU halt by debugger.
It also requires a minimum window value different than zero
so that the watchdog is refreshed during the open window.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Enable all channels that available connector on board.
ADC0 channel 6 on precision group with normal end chain
callback.
ADC1 channel 2 on precision group with normal end of
conversion callback.
ADC2 channels 3, 4, 5 on precision group with normal end
of conversion callback.
Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
Add initial version of Infineon CAT1 counter driver
Add initial version of binding file for Infineon
Add counters to psco6 dtsi
Add external trigger pin that runs counter
Signed-off-by: Pavlo Havrylyuk <pavlo.havrylyuk@infineon.com>
Remove virtual esp32 board and replace it with the
real word boards:
- esp32_devkitc_wroom
- esp32_devkitc_wrover (with PSRAM option)
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Add sample to demonstrate usage of IS31FL3733 LED using the LED API.
This led matrix controller has several custom APIs to expose
functionality not available within the standard led API, such as
limiting LED current.
Signed-off-by: Daniel DeGrasse <daniel@degrasse.com>
To demonstrate how to configure Zephyr to use the IPM
driver over the IVSHMEM subsystem. Since this driver
is intended to generate inter QEMU VM notifications
it was better to create a sample app using the shell
for quick demonstration for the users.
Signed-off-by: Felipe Neves <felipe.neves@linaro.org>
During testing I've found one bad path and looked if
there is more.
I've used this oneliner to find more:
```
rg :zephyr-app: | awk '{ print $3 }' | while read dir
do
test -d $dir || echo $dir
done | grep '^samples' | grep -v '<' | sort | uniq
```
Signed-off-by: Nerijus Bendžiūnas <nerijus.bendziunas@gmail.com>
Convert the GT911 driver to the input subsystem, fix the existing boards
to work in the default config.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Enable logging by default in kscan sample, so that user will see output
even if they do not have a keyboard connected that follows the keymap.
Add a specific testcase for boards that support the RK055HDMIPI4M
display.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove display definition from RT595 EVK, as this is now supported by
the shield. Add gpio nexus for the FFC connector on this EVK.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
1. Add atcwdt200 options for WDT_NODE in testcase.
2. Add the board overlay file in wdt sample to specify
the watchdog0 alias
Signed-off-by: Kevin Wang <kevinwang821020@google.com>
Add a config "fixture_auxdisplay" to make the samples/drivers/auxdisplay
runnable on a platform, else the application is useless
This fixture will differ from the existing "fixture_display"
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This enables the samples/drivers/spi_flash on quad-spi flash
to run on any stm32 target with external NOR quad flash.
The SPI_FLASH_MULTI_SECTOR_TEST test case is possible with
quadspi too.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This adds the support jedec configuration to run
the jedec sample application. So target board can display
the content of the quad-NOR flash.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add support for communication with serial ports on native POSIX platform
via UART driver API. Serial port driver supports polling API,
configuration of the serial ports used via devicetree and command line
options, and runtime configuration with `uart_configure`.
Multiple instances of the driver are supported.
Example use and configuration is also demonstrated in the
`samples/drivers/uart/native_tty` sample.
Closes: #56586
Signed-off-by: Marko Sagadin <marko.sagadin42@gmail.com>
- Add integration_platforms to avoid excessive filtering
- Make sure integration platforms are actually part of the filter
- Fix some tags and test meta data
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add the '.buffered' field to the dac_channel_cfg structure
when testing the DAC.
This boolean parameter is initialised to 'true' to PASS the test.
It follows the https://github.com/zephyrproject-rtos/zephyr/pull/57730
Also changed for the samples/drivers/dac
Signed-off-by: Francois Ramu <francois.ramu@st.com>
PECI bus sample requires a controller and a target
Intel system(PECI controller) + Embedded controller(PECI target),
where EC HW can be add-on card (mec172xmodular) or onboard EC.
MEC172x EVB is not intended to be connected hence excluding
the platform.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
