Qemu doesn't like tickless. By default[1] it tries to be realtime as
vied by the host CPU -- presenting read values from hardware cycle
counters and interrupt timings at the appropriate real world clock
times according to whatever the simulated counter frequency is. But
when the host system is loaded, there is always the problem that the
qemu process might not see physical CPU time for large chunks of time
(i.e. a host OS scheduling quantum -- generally about the same size as
guest ticks!) leading to lost cycles.
When those timer interrupts are delivered by the emulated hardware at
fixed frequencies without software intervention, that's not so bad:
the work the guest has to do after the interrupt generally happens
synchronously (because the qemu process has just started running) and
nothing notices the dropout.
But with tickless, the interrupts need to be explicitly programmed by
guest software! That means the driver needs to be sure it's going to
get some real CPU time within some small fraction of a Zephyr tick of
the right time, otherwise the computations get wonky.
The end result is that qemu tends to work with tickless well on an
unloaded/idle run, but not in situations (like sanitycheck) where it
needs to content with other processes for host CPU.
So, add a flag that drivers can use to "fake" tickless behavior when
run under qemu (only), and enable it (only!) for the small handful of
tests that are having trouble.
[1] There is an -icount feature to implement proper cycle counting at
the expense of real-world-time correspondence. Maybe someday we might
get it to work for us.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
In the POSIX architecture, with the inf_clock "SOC", time does
not pass while the CPU is running. Tests that require time to pass
while busy waiting should call k_busy_wait() or in some other way
set the CPU to idle. This test was setting the CPU to idle while
waiting for the next time slice. This is ok if the system tick
(timer) is active and awaking the CPU every system tick period.
But when configured in tickless mode that is not the case, and the
CPU was set to sleep for an indefinite amount of time.
This commit fixes it by using k_busy_wait(a few microseconds) inside
that busy wait loop instead.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
I was pretty careful, but these snuck in. Most of them are due to
overbroad string replacements in comments. The pull request is very
large, and I'm too lazy to find exactly where to back-merge all of
these.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This was another "global variable" API. Give it function syntax too.
Also add a warning, because on nRF devices (at least) the cycle clock
runs in kHz and is too slow to give a precise answer here.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The existing API defined sys_clock_{hw_cycles,ticks}_per_sec as simple
"variables" to be shared, except that they were only real storage in
certain modes (the HPET driver, basically) and everywhere else they
were a build constant.
Properly, these should be an API defined by the timer driver (who
controls those rates) and consumed by the clock subsystem. So give
them function syntax as a stepping stone to get there.
Note that this also removes the deprecated variable
_sys_clock_us_per_tick rather than give it the same treatment.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add test description, RTM links and doxygen links for common,
interrupt and boot page table test cases.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
Zephyr code routinely assumes conventional ILP32/LP64 integer
behavior, and occasionally relies on it to perform some nice tricks.
This is despite the fact that this behavior (while pervasively adopted
and in use on all architectures we care about supporting) isn't
actually guaranteed by the language standard which allows much looser
semantics than actual exist on hardware.
Put it into the intmath section of this test as a build time thing.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Instead of completely excluding those tests, mark them as skipped and
provide an noop function that marks the test as skipped where test is
not supported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Following tests were failing on a microcontroller with 32KB flash:
test-mbedtls
kernel.common
The min_flash option has been added in the test case yaml files.
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
This test validates random number generator APIs that
is not related to kernel and should not be part of
kernel tests.
Signed-off-by: Praful Swarnakar <praful.swarnakar@intel.com>
Modified the testcase for comparing the successive random
numbers generated by sys_rand32_get(). Also, added new configs
for verifying different sources of random number generation.
Signed-off-by: Praful Swarnakar <praful.swarnakar@intel.com>
If the systick period is < 5ms the clock testcase will
stall.
Added a note to warn whoever hits it.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Basic test for sys_kernel_version_get verifying macros work correctly
and we get the expected version parts using the macros.
Fixes#4777
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
This should clear up some of the confusion with random number
generators and drivers that obtain entropy from the hardware. Also,
many hardware number generators have limited bandwidth, so it's natural
for their output to be only used for seeding a random number generator.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This will prepare test cases and samples with metadata and information
that will be consumed by the sanitycheck script which will be changed to
parse YAML files instead of ini.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
64-bit types were not being handled properly and depending on the
calling convention could result in garbage values being printed.
We still truncate these to 32-bit values, the predominant use-case
is printing timestamp delta values which generally fit in a 32-bit
value. However we are no longer printing random stuff.
Test case for printk() updated appripriately to catch this regression.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fixes sparse warning:
<snip>/zephyr/zephyr/misc/printk.c:50:5: warning: symbol '_char_out' was not declared. Should it be static?
Change-Id: I5af0860e9f8f827002ae9a142b5924d3de8d51b6
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I6c676bc6c5e850a8725785554cd535e32067f33e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
ztest has a number of assert style macros and used a baseline assert()
that varies from the system definition of assert() so lets rename
everything as zassert to be clear.
Change-Id: I7f176b3bae94d1045054d665be8b5bda947e5bb0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
tests/kernel/common:
added test case to cover kernel clocks service.
https://www.zephyrproject.org/doc/kernel/timing/clocks.html
Jira: ZEP-1242
Change-Id: I40a06dd9d4dcb1ed24d488088eb2e456740c3bad
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
That was an oversight that should not have caused any problem. However,
the test harness expects the test's thread to be higher prio than the
test suite's thread that spawns it, because the test suite reuses the
stack space for the next test, if there is one.
Change-Id: Iad951118278abf0d9c23012d78ed56b75bc2958a
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Current users of sys_bitfield*() are bending over backwards to cast
what is most of the times a pointer into an integer.
Bitfields can be better described with an void *, so
uint{8,16,32,64}_t or any other container can be used. Most
sys_bitfield*() operations, by extension, can do the same. Note void *
has byte arithmetic, like char *.
This change will also make it implicit, for any future split of the
address space between virtual (what the SW is seeing) and physical
(what the HW is seeing) way clearer, as the functions dealing with
physical, non directly referentiable/mappeable addreses to use an
integer type, like mem_addr_t.
- include/arch/ARCH/*asm_inline*:
- sys_bitfield*() all modified to take 'void *'
Note 'void *' arihtmethic is byte based, which makes some things
easier.
- include/sys_io.h:
- introduces DEFINE_BITFIELD
- update docs
- tests/kernel/bitfield: remove all the cast contortions, use DEFINE_BITFIELD
PENDING: update other TCs
- include/arch/nios/nios2.h, drivers/interrupt_controller/ioapic_intr.c:
remove cast contortions
Change-Id: I901e62c76af46f26ff0d29cdc37099597f884511
Jira: ZEP-1347
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Timeouts, when expiring on the same tick, should be handled in the same
order they were queued.
Change-Id: I23a8e971a47ca056b32b8b48fe179d481bae27c0
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
