Use sys_put_le16() for unaligned access, this is refactored work of
PR #8495
PR #11432
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Start of Frame events can now be accessed from USB classes.
This will be useful when implementing idle rate functionality.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
patch fix fault due to unaligned access while setting hid
report size on xtensa platform.
Fixes#11266
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Couple of findings which were revealed after changing
LOG_MODULE_REGISTER macro:
- missing semicolons after LOG_MODULE_REGISTER()
- missing LOG_LEVEL defines
- other
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Move ECM functionality from netusb to function_ecm making defines not
needed in many cases.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
usb_dc_status_callback() parameters are interface or configuration
numbers and should be const.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Adding status callback allows to control report sending only when i.e.
device is connected or configured.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Adding spaces around "=" when definining Kconfig template so
that is more consistent with overall style of these template
variables.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
patch add a OUT interrupt endpoint descriptor and registers a
corresponding notification callback with usb driver, which is invoked
when data is sent to device from host.
Implement the read ready notification as suggesteed by
Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Consistently use
config FOO
bool/int/hex/string "Prompt text"
instead of
config FOO
bool/int/hex/string
prompt "Prompt text"
(...and a bunch of other variations that e.g. swapped the order of the
type and the 'prompt', or put other properties between them).
The shorthand is fully equivalent to using 'prompt'. It saves lines and
avoids tricking people into thinking there is some semantic difference.
Most of the grunt work was done by a modified version of
https://unix.stackexchange.com/questions/26284/how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some
of the rarer variations had to be converted manually.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Zephyr UART drivers offer very low-level functionality. Oftentimes,
it would be useful to provide higher-level wrappers around UART
device which would offer additional functionality. However, UART
driver irq callback routine receives just a pointer to (low-level)
UART device, and it's not possible to get to a wrapper structure
(without introducing expensive external mapping structures). This
is an indirect reason why the current UARt wrappers - uart_pipe,
console - are instantiated statically just for one underlying UART
device and cannot be reused for multiple devices.
Solve this by allowing to pass an arbitrary user data to irq
callback, set by new uart_irq_callback_user_data_set() function.
Existing uart_irq_callback_set() keeps setting a callback which
will receive pointer to the device.
While public API maintains compatibility, drivers themselves need
to be updated to support arbitrary user data storage/passing (as
legacy uart_irq_callback_set() functionality is now implemented in
terms of it).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Remove some 'default ""' properties on string symbols too.
Also make definitions more consistent by converting some
config FOO
<type>
prompt "foo"
definitions to a shorter form:
config FOO
<type> "foo"
This shorthand works for int/hex/string symbols too, not just for bool
symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Set subCompatibleID value according to "C:\Windows\INF\rndiscmp.inf"
file. The exact matching part is:
"USB\MS_COMP_RNDIS&MS_SUBCOMP_5162001"
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add loopback function. This function can be used to test
USB device drivers and device stack connected to linux host
and has the similar interface as "Gadget Zero" [1] of the Linux
kernel.
Use modprobe usbtest to load the module, see also [2] for the
description of the tests and for Vendor and Product ID of the
"Gadget Zero". The userspace tool testusb [3] is needed to start
the tests.
[1] linux/drivers/usb/gadget/function/f_loopback.c
[2] linux/drivers/usb/misc/usbtest.c
[3] linux/tools/usb/testusb.c
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
After PR #8608 every driver should call ethernet_init(), fixes missing
chunks of that PR.
Fixes: #8752
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
bcdUSB has been previously updated from 1.1 to 2.0 in default
device descriptor, but not in DFU class. After USB bus reset
performed by dfu-util, alternative descriptor is registered
with bcdUSB set to 1.1. This mismatch causes communication failure.
DFU descriptor's bcdUSB has been updated to match default one.
Relates to #7570
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
Remove all CONFIG_*_EP_ADDR options but keep the default
values for it, as they are necessary to find ep_addr in
usb_ep_cfg_data associated with bEndpointAddress in
interface descriptor.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
The payload size was hardcoded to 64.
This commit adds a configuration option to choose > 64 bytes
when the device allows larger packets.
A configuration option USB_HID_MAX_PAYLOAD_SIZE is added in
subsys/usb/class/hid/Kconfig
The default value is set to 64
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
A HID application can no longer write to the default
interrupt IN endpoint because the addresses are assigned
dynamically. Add hid_int_ep_write() function and leave
it to the hid-core to call the usb_write() with the correct
endpoint address.
fixes: #8424
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Adapt functions for new composite interface.
Assign bInterfaceNumber and similar variables of a Interface
default values, these should be valid values for non-composite
configuration. For the case of the composite configuration,
these variables must be set by the interface configuration
function (interface_config) accordingly.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This patch changes all class functions so that the endpoint
address will be retrieved from the usb_ep_cfg_data at runtime.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
