If IPv6 is disabled, then we can skip IPv6 checks and avoid
Coverity warnings. Same thing for IPv4.
Coverity-CID: 189506
Fixes#11100
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch fixes the compile error when CONFIG_NET_PKT_LOG_LEVEL
is LOG_LEVEL_DBG.
> subsys/net/ip/net_shell.c: In function ‘context_info’:
> subsys/net/ip/net_shell.c:2893:106: error: ‘struct net_buf_pool’
> has no member named ‘avail_count’
> subsys/net/ip/net_shell.c:2893:125: error: ‘struct net_buf_pool’
> has no member named ‘name’
In struct net_buf_pool, 'avail_count' and 'name' are depends on
CONFIG_NET_BUF_POOL_USAGE.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Instead of one global log level option and one on/off boolean
config option / module, this commit creates one log level option
for each module. This simplifies the logging as it is now possible
to enable different level of debugging output for each network
module individually.
The commit also converts the code to use the new logger
instead of the old sys_log.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Completely remove the last_sync_receipt_timeout time. It is not part of
the standard (see 802.1AS-2011, 10.2.11 for the complete list of
variables for this state machine). Additionally this extra variable was
never really initialized so the calculated duration made no sense.
Just start the timer based on the regular sync receipt timeout time
interval from the port data set.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
New shell implementation is on the way. For now old one and all
references are kept to be gradually replaced by new shell.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The new "net ipv6" command which will print general IPv6 configuration
and information about autoconfigured IPv6 addresses.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No functionality changes. Just moved IPv6 neighbor and related functions
to ipv6_nbr.c for better readability.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Each IPv6 neighbor entry had a k_delayed_work to be used as a timer to
send ND reachable message and waiting for the reply in order to get to
the neighbor details.
But k_delayed_work is not a small object (40 bytes). Thus reworking the
IPv6 ND reachable request timer by having one central k_delayed_work
and a timestamp in every IPv6 neighbor data entry properly handled at
every timeout.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Refactor usage of net_sprint_ip*() where multiple
invocations are needed per single log call.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Make sure that string to integer conversions are checked properly
so that we are not trying to use the return value from strtol()
if the string is not a number.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allows ethernet drivers to provide vendor specific statistics
and details in the form of key-value pairs with the name of
the staticstic and its value.
The new string tables will be behind a new config:
NET_STATISTICS_ETHERNET_VENDOR
Suggested-by: Jukka Rissanen <jukka.rissanen@intel.com>
Signed-off-by: Jonathan Yong <jonathan.yong@intel.com>
There are too many individual requests for Qav related parameters. There
are more Qav parameters that need to be supported (and will be supported
soon - both on the GET and SET side). Handling it the way it was handled
so far would render the eth mgmt API dominated by Qav parameters. That
would make the file hard to read and understand.
Instead of that - use a single GET and SET requests for all Qav
parameters. This works by adding a separate enum with Qav request type
to the ethernet_qav_param struct.
Additionally this approach makes it much easier to document it all since
we now have just a single request and documentation comments in the
ethernet_qav_param struct.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Print information about supported hardware capabilities for
ethernet interfaces when executing "net iface" command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If ethernet mgmt is enabled and the driver supports priority queues,
show info about them including the Qav status
(enabled/disabled/unsupported).
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The shell did not check if the gptp port (command argument) is numeric.
Add that check before executing the port info functions.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
There is no link address for Dummy network technology, so check
that before trying to print link address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This implements LLMNR client from RFC 4795. This means that caller
is able to resolve DNS resource records using multicast DNS.
The LLMNR is used in Windows networks.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This "net gptp [port id]" command will give some extra info about
gPTP status if gPTP is enabled in config file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It's rather confusing to not see current TCP state in any way (it
makes distinguishing different TCP contexts very hard). And nobody
can know/remember that it's printed with CONFIG_NET_DEBUG_TCP
defined. So, just make it be printed always (initially I thought
about printing just numeric value if CONFIG_NET_DEBUG_TCP isn't
defined, but why, if we can print symbolic name easily).
Also, add a hint that defining CONFIG_NET_DEBUG_TCP will still
print even more info (like unacked pkt list) - similarly to
similar helpful hints we have in other parts of net shell.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
When disabling an ethernet interface, only its cache entries need to be
cleared up and not the whole cache. This is meaninful in case there is
2+ ethernet interface instances.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This one converts "raw" timeout value to use K_MSEC() macro
in order to make clear how long the timeout is.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Similar to UDP, some drivers can make use of the following functions:
net_tcp_get_hdr()
net_tcp_set_hdr()
Let's expose them as <net/tcp.h> and change all internal references
to "tcp_internal.h".
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Instead of always using default interface, use the IPv4 target
address to select the correct network interface when sending
IPv4 ping request.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Drivers will be directly contacted via net_if's offload attribute. No
need for a an extra layer as an L2.
Signed-off-by: Dario Pennisi <dario@iptronix.com>
Signed-off-by: Massimiliano Agneni <massimiliano.agneni@iptronix.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of one global statistics, collect statistics information
separately for each network interface. This per interface statistics
collection is optional but turned on by default. It can be turned
off if needed, in which case only global statistics are collected.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User is able to take a network interface down or bring it up.
The command syntax is "net iface [up|down] [index]"
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add commands to add, remove or get information about VLANs
attached to network interfaces.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows creation of virtual lan (VLAN) networks. VLAN support is
only available for ethernet network technology.
Fixes#3234
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The "net stacks" command was printing TX or RX thread values so
that it was not possible to use the values in debugging easily.
Add traffic class value when printing the info so that it is
easy to see what TX or RX queue is doing.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add statistics for number of packets and bytes to each traffic
class. Print this information in net-shell.
Also make sure that we do not calculate total packet length many
times. So calculate network packet total length once and then use
that value instead of calculating it many times in a row.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of always allocating both IPv6 and IPv4 address information
to every network interface, allow more fine grained address
configuration. So it is possible to have IPv6 or IPv4 only network
interfaces.
This commit introduces two new config options:
CONFIG_NET_IF_MAX_IPV4_COUNT and CONFIG_NET_IF_MAX_IPV6_COUNT
which tell how many IP address information structs are allocated
statically. At runtime when network interface is setup, it is then
possible to attach this IP address info struct to a specific
network interface. This can save considerable amount of memory
as the IP address information struct can be quite large (depends
on how many IP addresses user configures in the system).
Note that the value of CONFIG_NET_IF_MAX_IPV4_COUNT and
CONFIG_NET_IF_MAX_IPV6_COUNT should reflect the estimated number of
network interfaces in the system. So if if CONFIG_NET_IF_MAX_IPV6_COUNT
is set to 1 and there are two network interfaces that need IPv6
addresses, then the system will not be able to setup IPv6 addresses to
the second network interface in this case. This scenario might be
just fine if the second network interface is IPv4 only. The net_if.c
will print a warning during startup if mismatch about the counts and
the actual number of network interface is detected.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move IP address settings from net_if to separate structs.
This is needed for VLAN support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Pool size is no longer available so it is no use trying to print
its value. This change was introduced in commit dd09cbc1c4
("net: buf: Redesigned API with split data and meta-data")
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The meaning of this address type is the same as NET_ADDR_MANUAL,
but with a provision that DHCP can override such an address.
It's intended for the usecase when there's a default static
configuration for when DHCP is not available, but DHCP should
override it.
Before going to add another address type, there was an attempt
to repurpose TENTATIVE address state, but it doesn't work as
expected, as indeed, all existing address types/states already
have clearly semantics, and it makes sense to just another
address type to avoid confusion and unexpected behavior.
Fixes: #5696
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The ICMPv4 handler needs to unref the received echo reply packet
because we are returning NET_OK to caller. Similar change was done
for IPv6 earlier.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When testing ping6 with net shell, it was noticed that after some
sucessive calls the applications stopped to handle rx packets.
Analyzing other icmpv6 register callbacks it was verified that is
necessary to unref packets before returning NET_OK.
Signed-off-by: Pedro Martucci <pedropaulomartucci@gmail.com>
The ping command was not checking if the user gave target
host as a parameter. This would lead to NULL pointer access.
Fixes#4827
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Create http library that uses net-app instead of net_context
directly. The old HTTP API is deprecated.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
