Unify the function naming for various network checking functions.
For example:
net_is_ipv6_addr_loopback() -> net_ipv6_is_addr_loopback()
net_is_my_ipv6_maddr() -> net_ipv6_is_my_maddr()
etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the debugging print calls are async, all the strings that might
be overwritten must use log_strdup() which will create a copy
of the printable string.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of one global log level option and one on/off boolean
config option / module, this commit creates one log level option
for each module. This simplifies the logging as it is now possible
to enable different level of debugging output for each network
module individually.
The commit also converts the code to use the new logger
instead of the old sys_log.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use the destination address to select the proper network interface
when binding. The default network interface cannot be used here
as then the packet might be sent to wrong network interface.
Fixes#9935
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
- Up to net_context to give the source port.
- net_udp_append is unused anywhere: let's remove it.
- left over macros on _raw versions removed as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of waiting forever for a network buffer, have a timeout
when allocating net_buf. This way we cannot left hanging for a
long time waiting for a buffer and possibly deadlock the system.
This commit only adds checks to core IP stack in subsys/net/ip
Fixes#7571
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Similar to UDP, some drivers can make use of the following functions:
net_tcp_get_hdr()
net_tcp_set_hdr()
Let's expose them as <net/tcp.h> and change all internal references
to "tcp_internal.h".
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
sendto() is one and only caller of send_data(), a function of handful
of lines, and yet send_data() is located a hundred lines away from
it. Such "spaghetti functions" complicate review, debugging, and
refactoring of the IP stack.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Instead of one global statistics, collect statistics information
separately for each network interface. This per interface statistics
collection is optional but turned on by default. It can be turned
off if needed, in which case only global statistics are collected.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move core TCP functionality from net_context.c to tcp.c. Create empty
functions that the compiler can remove if TCP is not configured. As a
result remove TCP ifdefs from net_context.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Similar to the socket connect() call, calling connect for a UDP
context needs to set both local and remote addresses and port
number. Fix this not to be exclusive for TCP.
Similarly, the remote destination can be a multicast address when
UDP is used.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Queue a TCP FIN packet when needed if the socket was connected or
listening and where FIN wasn't already received.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
A new context cannot have callbacks set, as it was freshly created
in the beginning of the function. Thus the extra callback clearing
can be removed. This is a left-over from commit ce41d5f432.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Ifdefs around TCP code can be removed since the TCP code will compile
to empty functions when not enabled.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Refactor sendto() code so that destination address and its validity
is checked first, followed by offloading verification. Move context
and shutdown checks into TCP queueing function.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Add context option support and implement PRIORITY option that
can be used to classify the network traffic to different trafic
classes according to said priority value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We're missing a k_sem_give for contexts_lock in the
CONFIG_NET_OFFLOAD path of net_context_put().
This fixes a network hang which occurs after any http_close()
call when CONFIG_NET_OFFLOAD is enabled.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
If context is bound to IPv6 unspecified addresss and some port
number, then unspecified address is passed in TCP reset packet
message preparation. Eventually packet dropped at the peer.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
In case of failed to get source address from the net packet,
release the assgined tcp backlog entry. Otherwise it will
never be freed.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
k_delayed_work_cancel(&context->tcp->fin_timer) called twice
immediately one after other.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This field is set and maintained, but not actually used for anything.
The only purpose for it would be to validate ACK numbers from peer,
but such a validation is now implemented by using send_seq field
directly.
Fixes: #4653
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Per RFC 793:
A new acknowledgment (called an "acceptable ack"), is one for which
the inequality below holds:
SND.UNA < SEG.ACK =< SND.NXT
If acknowledgement is received for sequence number which wasn't yet
sent, log an error and ignore it.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Right now in FIN_WAIT1 state, if we receive FIN+ACK message, then
tcp state changed to FIN_WAIT2 on ACK flag and immediately on FIN
flag state changed to TIME_WAIT. Then final ACK is prepared and sent
(in queue at-least) to peer. Again immediately state changed to
TCP_CLOSED, where context is freed. net_context_put frees context
and releases tcp connection. Final ACK packet which is in queue
is dropped.
As a side effect of freed ACK packet, peer device keep on sending
FIN+ACK messages (that's why we see a lot of "TCP spurious
retransimission" messages in wireshark). As a result
of context free (respective connection handler also removed), we see
lot of packets dropped at connection input handler and replying with
ICMP error messages (destination unreachable).
To fix this issue, timewait timer support is required. When tcp
connection state changed to TIMEWAIT state, it should wait until
TIMEWAIT_TIMETOUT before changing state to TCP_CLOSED. It's
appropriate to close the tcp connection after timewait timer expiry.
Note: Right now timeout value is constant (250ms). But it should
be 2 * MSL (Maximum segment lifetime).
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
fin_timer will be started after sending FIN to peer. After successful
reception of FIN+ACK message in FIN_WAIT1 state, fin_timer should be
cancelled.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Previously, the connection will be reset easily due to a forged TCP
reset with a random sequence number.
As described in RFC793 p.69, we should check if the sequence number
falls into the receiver window at first.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Previously, if passive close is peformed, the net context is released
after FIN is received and FIN,ACK is sent. The following last ack from
the peer will be treated as an improper packet, RST is sent to the peer.
This patch refines tcp_established() by centralizing the tcp state
transition and releases the net context only if NET_TCP_CLOSED is
reached.
Besides, the logic that releases the net pkt without appdata (i.e. ACK
or FIN) is moved from packet_received() to tcp_established(). This makes
packet_received() less dependent on the protocol and make the usage of
net pkt more clear in tcp_established().
Fixes: #4901
Signed-off-by: Aska Wu <aska.wu@linaro.org>
If the packet is too short, the TCP header pointer might be
NULL. In this case we just need to bail out.
Coverity-CID: 178787
Fixes#4787
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a generic function for TCP option parsing. So far we're
interested only in MSS option value, so that's what it handles.
Use it to parse MSS value in net_context incoming SYN packet
handler.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Calculates full TCP header length (with options). Macro introduced
for reuse, to avoid "magic formula". (E.g., it would be needed to
parse TCP options).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
MSS is Maximum Segment Size (data payload) of TCP. In SYN packets,
each side of the connection shares an MSS it wants to use (receive)
via the corresponding TCP option. If the option is not available,
the RFC mandates use of the value 536.
This patch handles storage of the send MSS (in the TCP structure,
in TCP backlog), with follow up patch handling actual parsing it
from the SYN TCP options.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The code parsing received net pkt to get source or destination
sockaddr repeats multiple times in net_context.c.
Eliminate the duplication by net_pkt_get_src_addr() and
net_pkt_get_dst_addr() which can handle different internet protocol
(i.e. ipv4 or ipv6) and transport protocol (i.e. tcp or udp)
Fixes: #4421
Signed-off-by: Aska Wu <aska.wu@linaro.org>
The call to net_context_recv() with timeout returned -ETIMEDOUT
even when data was returned properly and there was no timeout.
Fixes#4565
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In bind_default(), a local variable is passed to find_available_port().
However, the port number is unpredictable as it's not initialized and
will be used directly if not zero. This will lead to problems if the
port number is already used.
This patch makes find_available_port() always returns an available port
regardless of the port number in the sockaddr parameter.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
There were decrements of TCP sequence numbers, inherited from FNET
stack implementation, as was used as an initial base. RFC793 does
not specify conditions for decrementing sequence numbers, so such
decrements are an artifact of FNET implementation. In Zephyr code,
we had to compensate for these decrements by extra increments
(including an increment-by-2). So, remove decrements and associated
extra increments to simplify the code.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This patch makes net_context_sendto() work independently without calling
net_context_connect() first. It will bind default address and port if
necessary.
Also, since receive callback should be provided before sending data in
order to receive the response, bind default address and port to prevent
providing an unbound address and port to net_conn_register().
Signed-off-by: Aska Wu <aska.wu@linaro.org>
If the user tried to bind to IPv4 multicast address, then the
operation failed and returned error.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When new connection is accepted, the TCP context variables like
sequence number etc. were not properly set.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This reverts commit 817245c564.
In certain cases the peer seems to discard the FIN packet we are
sending, which means that the TCP stream is not closed properly.
This needs more work so revert this for time being.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
