BT_LE_ADV_CONN_DIR_LOW_DUTY declares a local variable so it cannot go
out of scope, so instead of assigning in the scope of the if statement
this rework the code to mantain the declaration in the same scope it is
used.
Fixes#10570
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The code had somehow gotten corrupt (yet in a way that it compiles) so
that an intended if-branch was missing.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds a possibility to reject incomming LE Connection request
due to insufficient authorization or encryption key size.
This is needed for qualification purposes
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This shell command was tied to bluetooth and the bluetooth shell and
also had messages all related to nordic ICs.
Make it generic and put it under drivers/flash/ so it can be included by
anyone and independently of bluetooth.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
To allow the BLE stack to be used both in the real nRF platforms
and simulated ones, change the used macros in the code to the
COMPATIBLE ones.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
1. Command handler can return command exectution status as int.
2. Existing command handlers rework.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
This splits L2CAP commands under 'bt' to 'l2cap' removing 'l2cap-'
prefix from the commands:
l2cap - Bluetooth L2CAP shell commands
Options:
-h, --help :Show command help.
Subcommands:
connect :<psm>
disconnect :[none]
metrics :<value on, off>
recv :[delay (in miliseconds)
register :<psm> [sec_level]
send :<number of packets>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This splits BR/EDR command under 'bt' to 'br' to reduce the command
list and at same time cleaning the mix between different bearers.
In addition to that also remove "br-" prefix for the commands:
br - Bluetooth BR/EDR shell commands
Options:
-h, --help :Show command help.
Subcommands:
auth-pincode :<pincode>
connect :<address>
discovery :<value: on, off> [length: 1-48] [mode: limited]
iscan :<value: on, off>
l2cap-register :<psm>
oob :
pscan :value: on, off
sdp-find :<HFPAG>
rfcomm-register :<channel>
rfcomm-connect :<channel>
rfcomm-send :<number of packets>
rfcomm-disconnect :[none]
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a int return to recv callback which can be used to notify the
stack about errors when receiving a packet. In addition to that the user
can return -EINPROGRESS to inform the stack the data will be processed
asynchronously which can be complete by calling
bt_l2cap_chan_recv_complete.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
New shell implementation is on the way. For now old one and all
references are kept to be gradually replaced by new shell.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add a new command in the shell which can be used to set the channel
map by specifying a 37 bit bitmask written as a five byte hex array.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This adds a shell command for qualification purposes to enable/disable
Bonding flag in Authentication Requirements.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This enables using these commands to perform discover all procedure:
> gatt-discover-primary
Discover pending
Service 1800 found: start handle 1, end_handle 5
Service 1801 found: start handle 6, end_handle 9
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Added a new command, which can be used to test the directed advertising
API. This command allows user to turn on directed advertising in two
modes: low and high duty. High duty mode is the default one.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Make it possible to have multiple identity addresses as an LE
peripheral. For central role only the default identity is supported
for now. This also extends the flash storage in a backward compatible
way.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a callback struct with only the pairing_confirm authentication
method. This is useful both for just-works testing as well as the
recently added fixed passkey support.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
hci-cmd can be used to inject an arbritrary HCI command which can be
useful when testing vendor/new commands.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
name command can be used to read or write the GAP Device Name which is
used by the advertise command.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Remove some 'default ""' properties on string symbols too.
Also make definitions more consistent by converting some
config FOO
<type>
prompt "foo"
definitions to a shorter form:
config FOO
<type> "foo"
This shorthand works for int/hex/string symbols too, not just for bool
symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This ensures the every characteristic has a value attribute declared
with the same UUID since the old macro did not declare the value the
application would normally have to declare one itself using a different
UUID which is not allowed.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Enable settings and increase the system workqueue size to deal with
the stack usage. This also makes it possible to test unpairing support
with the shell's 'clear' command.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The same functionality is now supported by the settings-based
solution, so remove bt_storage out of the way. There were stubs in
bt_storage to handle per-peer information (e.g. pairing keys) but this
was never actually implemented in full. The next step is to add this
support to the settings-based solution.
Leave the code for generating temporary IRK and identity address in
case BT_SETTINGS is not enabled. Also leave the code for using vendor
HCI to read the identity address, in which case the settings
implementation will not touch it.
Introduce a new bt_unpair() API to replace the removed
bt_storage_clear(), since the latter was actually doing more than just
storage management: it was also handling runtime storage of pairing
information. Later, the bt_unpair() implementation will be extended to
clear settings-based pairing storage.
There is one feature that the bt shell module looses: the ability to
give a specific identity address to the "init" command as a parameter.
We might look later in the future if this is really needed, and add a
separate API for this.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This was originally added as a work-around to avoid the heavy stack
consumption of the TinyCrypt PRNG when generating NRPAs. This is
no-longer an issue, and there are in fact no (in-tree) users of this.
Remove it before it gains any wider users, since it was in many ways a
hack/work-around to begin with.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With upcoming ICs that are not in the nRF5x family, rename the flash
driver and all its dependencies from nrf5 to nrf.
Should also fix the issue introduced by f49150cab6 which broke the
assignment of the flash device due to a partial rename.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Upcoming Nordic ICs that share many of the peripherals and architecture
with the currently supported nRF5x ones are no longer part of the nRF5
family. In order to accomodate that, rename the SoC family from nrf5 to
nrf, so that it can contain all of the members of the wider Nordic
family.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
