Start of Frame events can now be accessed from USB classes.
This will be useful when implementing idle rate functionality.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Since setting USB console port name is moved to DTS users have
problems enabling it. Notify user that the console is not set.
Fixes#10693
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Adds the virtualcom device to the nrf52840 SoC dts and adds a board
specific nrf52840_overlay.dts file, copied exactly from the
arduino101_overlay.dts file, to set the console device name
appropriately for the subsys/usb/console sample project.
There were no clear alternatives to add a usb_cdc: virtualcom device to
all known SoC devices with USB support as should probably happen.
There was also no clear alternatives to add a non-board specific overlay
to the example.
This fixes a specific problem with the nrf52840-dk board for this sample
project.
Signed-off-by: Tom Burdick <thomas.burdick@gmail.com>
This commit would add the pull-up or pull-down on the switch pin and
makes it functional on the board where there is no external pull-up.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Couple of findings which were revealed after changing
LOG_MODULE_REGISTER macro:
- missing semicolons after LOG_MODULE_REGISTER()
- missing LOG_LEVEL defines
- other
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The USB mass storage documentation was completely outdated. Rewrite it
using reStructuredText, and mentioning the two possible overlays.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The HID mouse sample uses the GPIO to read the state of a button, but
does not enable CONFIG_GPIO, causing the example to fail. Fix that.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
Add console harness support for USB mass storage test.
Also, using overlay config for DISK_ACCESS configuration
and accessing the different config file with different
method.
Signed-off-by: Ajay Kishore <ajay.kishore@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
usb_dc_status_callback() parameters are interface or configuration
numbers and should be const.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Refactor USB writes, start transfer only when device
is configured, the change makes it possible to work with native_posix
USB virtual controller.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This converts the http links within the Zephyr document
into references. This allows the links within the PDF file
to jump to the correct sections instead of going to
the Internet.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add loopback function. This function can be used to test
USB device drivers and device stack connected to linux host
and has the similar interface as "Gadget Zero" [1] of the Linux
kernel.
Use modprobe usbtest to load the module, see also [2] for the
description of the tests and for Vendor and Product ID of the
"Gadget Zero". The userspace tool testusb [3] is needed to start
the tests.
[1] linux/drivers/usb/gadget/function/f_loopback.c
[2] linux/drivers/usb/misc/usbtest.c
[3] linux/tools/usb/testusb.c
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
CDC ACM is not needed in webusb, communication is going through Bulk
endpoints. Endpoint numbers stay the same only Interface number
changed, so basically only this change is needed:
- .then(() => this.device_.claimInterface(2))
+ .then(() => this.device_.claimInterface(0))
this.device_.claimInterface({2,0}) apart from removing serial port
commands.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
A HID application can no longer write to the default
interrupt IN endpoint because the addresses are assigned
dynamically. Add hid_int_ep_write() function and leave
it to the hid-core to call the usb_write() with the correct
endpoint address.
fixes: #8424
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This adds the "old" (pre-windows8) way of doing microsoft-
specific USB descriptors, alongside the v2.0 way of doing
the same.
Signed-off-by: Iván Sánchez Ortega <ivan@sanchezortega.es>
This adds some vendor-specific microsoft USB descriptors, which
makes the win8/win10 enumeration process to report a "WINUSB"
capability, which in turn automatically binds a WinUSB.sys driver
to a specific set of interfaces. This, in theory, makes userspace
drivers easier to handle in win32/win64 platforms.
Signed-off-by: Iván Sánchez Ortega <ivan@sanchezortega.es>
Assign the appropriate disk name Kconfig option to the
usb mass storage sample test.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
This patch moves USB DFU class driver to subsys/usb/class.
For the first the USB DFU class driver depends on DFU image
manager and partition layout and is limited to use as an
application for the bootloader. The driver fetches the
information about the flash, erase block size, write block
size and partitions offset from the DT now. The driver has
two interfaces associated with the two partitions "SLOT-0"
and "SLOT-1". The "SLOT-0" can only be read.
In the following work the class driver can be extended so
that it can be used from the bootloader and update a flash
region directly from the bootloader.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This is a simple cosmetic change. Each field in the BOS (Binary
Object Store) descriptor has a comment, to understand it better.
Signed-off-by: Iván Sánchez Ortega <ivan@sanchezortega.es>
Rework samples using LED and GPIO to enforce use of "CONTROLLER"
as LED and PGIO postifx.
Change impact all samples that could be run by boards yet moved to
GPIO node generations, which is only STM32 for now
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add multifunction composite test for building USB device with HID and
MSC functions.
Fixes: #2613
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The current problem with HID is that we need to "patch" static
descriptor table with the size of report descriptor defined in the
user application.
The proposed solution is to have composite_pre_init() defined with
priority CONFIG_KERNEL_INIT_PRIORITY_DEVICE which should run before
composite_init() defined with priority
CONFIG_APPLICATION_INIT_PRIORITY.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
