Declare and define nxp_mpu_config and nxp_mpu_regions
structs as const, as they are not modified in run-time.
Fixes#10320
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Declare and define arm_mpu_config and arm_mpu_regions
structs as const, as they are not modified in run-time.
Fixes#10320
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit enhances the documentation of the nxp_mpu_config
element in include/arch/arm/cortex_m/mpu/nxp_mpu.h, stressing
that it intends to store information for fixed MPU regions.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
We now place the linker directives for the SW ISR table
in the common linker scripts, instead of repeating it
everywhere.
The table will be placed in RAM if dynamic interrupts are
enabled.
A dedicated section is used, as this data must not move
in between build phases.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit contributes a patch to the Arm Cortex-M linker
script, which guarantees that the linker sections for shared
memory and the application memory will have sufficient padding
in between, so that the latter will start from an address that
is 32-byte aligned. This is required for ensuring that the MPU
regions defined using the start and end addresses of the two
sections will not overlap. The patch targets ARMv8-M MPU with
no requirement for power-of-two alignment and size.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When using C++ exceptions in a Cortex-M, the linker return a warning:
warning: orphan section ".ARM.extab"
.ARM.extab section containing exception unwinding information.
This section is missing in the linker script for Cortex-M.
Signed-off-by: Benoit Leforestier <benoit.leforestier@gmail.com>
(Previous patch set was reverted due to issue with priv_stack.
Resubmitting after fixing the faults caused by priv_stack.noinit
not at the end of RAM.)
This adds a linker flag and necessary changes to linker scripts
so that linker will warn about orphan sections.
Relates to #5534.
Fixes#10473, #10474, #10515.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This puts the priviledged stack at the end of RAM.
This combines PR #10507 and #10542.
Fixes#10473Fixes#10474Fixes#10515
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The Cypress PSoC6 specifies some input sections in the startup
scripts. These sections (.heap, .stack, etc.) need to be placed
at correct location.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This allows the SoC to specify some additional linker script
fragments into the bss, data and read-only data sections.
For example, the Cypress PSOC6 has a few input sections that
must be put into bss and data sections. Without specifying
these in the linker script, they are consider orphan sections
and the placement is based on linker heuristic which is
arbitrary.
POSIX is not supported as the main linker script is
provided by the host system's binutils and we have no control
over it. Also, currently Xtensa SoCs have their own linker
scripts so there is no need to this feature.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
In ARMv8-M MPU it is not possible to have the following access
permissions: Privileged RW / Unprivileged RO. So we define
K_MEM_PARTITION_IS_WRITABLE macro separately for v8M and v7M MPU
architectures (in the separate include files).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This adds a linker flag and necessary changes to linker scripts
so that linker will warn about orphan sections.
Relates to #5534.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The Cypress PSoC6 specifies some input sections in the startup
scripts. These sections (.heap, .stack, etc.) need to be placed
at correct location.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This allows the SoC to specify some additional linker script
fragments into the bss, data and read-only data sections.
For example, the Cypress PSOC6 has a few input sections that
must be put into bss and data sections. Without specifying
these in the linker script, they are consider orphan sections
and the placement is based on linker heuristic which is
arbitrary.
POSIX is not supported as the main linker script is
provided by the host system's binutils and we have no control
over it. Also, currently Xtensa SoCs have their own linker
scripts so there is no need to this feature.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Improve the documentation of the ARMv8-M MPU convenience macros
for setting up MPU regions at boot time, stressing that the
macros intend to be used for non-overlapping, fixed MPU regions.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit enhances the documentation of the mpu_config
element in include/arch/arm/cortex_m/mpu/arm_mpu.h, stressing
that it intends to store information for fixed MPU regions.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove an inline explanatory comment for the thread
stack region type that is obsolete. The comment had
been been erroneously kept in after the enumeration
of MPU region types was refactored and cleaned up.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Any calculation based on linker variables shouldn't be inside
sections.
Also added the linker macro needed for the shared memory.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Some minor style fixes and rewording of the documentation
for ARM MPU region types.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit groups together the MPU region types
that are related to the User-space feature, so that
a single #ifdef USERSPACE is present in the enum.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Several style and typo fixes in inline comments of arm kernel
files and thread.c.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The header should check if the macro _MPU_PRESENT is defined
and create it only if not defined.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
The size calculation for power of 2 MPUs were incorrect.
The calculation was not taking into account the amount of padding
the linker does when doing the required alignment. Hence the size
being calculated was completely incorrect.
With this patch the code now is optimized and the size of
partitions is now provided by the linker.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This commit removes all MPU-related (ARM_CORE_MPU and NXP_MPU)
options exept ARM_MPU, which becomes master switch controlling
MPU support on ARM.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This commit moves the documentation corresponding to
_ARCH_THREAD_STACK_DEFINE(..) macro to the right place.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This reverts commit 17e9d623b4.
Single thread keep introducing more issues, decided to remove the
feature completely and push any required changes for after 1.13.
See #9808
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some applications have a use case for a tiny MULTITHREADING=n build
(which lacks most of the kernel) but still want special-purpose
drivers in that mode that might need to handle interupts. This
creates a chicken and egg problem, as arch code (for obvious reasons)
runs _Cstart() with interrupts disabled, and enables them only on
switching into a newly created thread context. Zephyr does not have a
"turn interrupts on now, please" API at the architecture level.
So this creates one as an arch-specific wrapper around
_arch_irq_unlock(). It's implemented as an optional macro the arch
can define to enable this behavior, falling back to the previous
scheme (and printing a helpful message) if it doesn't find it defined.
Only ARM and x86 are enabled in this patch.
Fixes#8393
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Define generic interface and hooks for tracing to replace
kernel_event_logger and existing tracing facilities with something more
common.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit implements and integrates the ARMv8-M MPU driver
into the memory protection system for ARM.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit introduces a type definition for the ARM MPU
region attribute container. This allows to abstract the type
of the attribute container and make the code extendible for
ARMv8-M, where the size and structure of the attribute
container will be different.
Therefore, we can, now, move the definition of the region
data structure in the common arm_mpu.h header.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds K-config options that allow the user to
signify an ARM Secure Firmware that contains Secure Entry
functions and to define the starting address of the linker
section that will contain the Secure Entry functions. It
also instructs the linker to append the NSC section if
instructed so by the user.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Split out the arch specific syscall code to reduce include pollution
from other arch related headers. For example on ARM its possible to get
errno.h included via SoC specific headers. Which created an interesting
compile issue because of the order of syscall & errno/errno syscall
inclusion.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Summary: revised attempt at addressing issue 6290. The
following provides an alternative to using
CONFIG_APPLICATION_MEMORY by compartmentalizing data into
Memory Domains. Dependent on MPU limitations, supports
compartmentalized Memory Domains for 1...N logical
applications. This is considered an initial attempt at
designing flexible compartmentalized Memory Domains for
multiple logical applications and, with the provided python
script and edited CMakeLists.txt, provides support for power
of 2 aligned MPU architectures.
Overview: The current patch uses qualifiers to group data into
subsections. The qualifier usage allows for dynamic subsection
creation and affords the developer a large amount of flexibility
in the grouping, naming, and size of the resulting partitions and
domains that are built on these subsections. By additional macro
calls, functions are created that help calculate the size,
address, and permissions for the subsections and enable the
developer to control application data in specified partitions and
memory domains.
Background: Initial attempts focused on creating a single
section in the linker script that then contained internally
grouped variables/data to allow MPU/MMU alignment and protection.
This did not provide additional functionality beyond
CONFIG_APPLICATION_MEMORY as we were unable to reliably group
data or determine their grouping via exported linker symbols.
Thus, the resulting decision was made to dynamically create
subsections using the current qualifier method. An attempt to
group the data by object file was tested, but found that this
broke applications such as ztest where two object files are
created: ztest and main. This also creates an issue of grouping
the two object files together in the same memory domain while
also allowing for compartmenting other data among threads.
Because it is not possible to know a) the name of the partition
and thus the symbol in the linker, b) the size of all the data
in the subsection, nor c) the overall number of partitions
created by the developer, it was not feasible to align the
subsections at compile time without using dynamically generated
linker script for MPU architectures requiring power of 2
alignment.
In order to provide support for MPU architectures that require a
power of 2 alignment, a python script is run at build prior to
when linker_priv_stacks.cmd is generated. This script scans the
built object files for all possible partitions and the names given
to them. It then generates a linker file (app_smem.ld) that is
included in the main linker.ld file. This app_smem.ld allows the
compiler and linker to then create each subsection and align to
the next power of 2.
Usage:
- Requires: app_memory/app_memdomain.h .
- _app_dmem(id) marks a variable to be placed into a data
section for memory partition id.
- _app_bmem(id) marks a variable to be placed into a bss
section for memory partition id.
- These are seen in the linker.map as "data_smem_id" and
"data_smem_idb".
- To create a k_mem_partition, call the macro
app_mem_partition(part0) where "part0" is the name then used to
refer to that partition. This macro only creates a function and
necessary data structures for the later "initialization".
- To create a memory domain for the partition, the macro
app_mem_domain(dom0) is called where "dom0" is the name then
used for the memory domain.
- To initialize the partition (effectively adding the partition
to a linked list), init_part_part0() is called. This is followed
by init_app_memory(), which walks all partitions in the linked
list and calculates the sizes for each partition.
- Once the partition is initialized, the domain can be
initialized with init_domain_dom0(part0) which initializes the
domain with partition part0.
- After the domain has been initialized, the current thread
can be added using add_thread_dom0(k_current_get()).
- The code used in ztests ans kernel/init has been added under
a conditional #ifdef to isolate the code from other tests.
The userspace test CMakeLists.txt file has commands to insert
the CONFIG_APP_SHARED_MEM definition into the required build
targets.
Example:
/* create partition at top of file outside functions */
app_mem_partition(part0);
/* create domain */
app_mem_domain(dom0);
_app_dmem(dom0) int var1;
_app_bmem(dom0) static volatile int var2;
int main()
{
init_part_part0();
init_app_memory();
init_domain_dom0(part0);
add_thread_dom0(k_current_get());
...
}
- If multiple partitions are being created, a variadic
preprocessor macro can be used as provided in
app_macro_support.h:
FOR_EACH(app_mem_partition, part0, part1, part2);
or, for multiple domains, similarly:
FOR_EACH(app_mem_domain, dom0, dom1);
Similarly, the init_part_* can also be used in the macro:
FOR_EACH(init_part, part0, part1, part2);
Testing:
- This has been successfully tested on qemu_x86 and the
ARM frdm_k64f board. It compiles and builds power of 2
aligned subsections for the linker script on the 96b_carbon
boards. These power of 2 alignments have been checked by
hand and are viewable in the zephyr.map file that is
produced during build. However, due to a shortage of
available MPU regions on the 96b_carbon board, we are unable
to test this.
- When run on the 96b_carbon board, the test suite will
enter execution, but each individaul test will fail due to
an MPU FAULT. This is expected as the required number of
MPU regions exceeds the number allowed due to the static
allocation. As the MPU driver does not detect this issue,
the fault occurs because the data being accessed has been
placed outside the active MPU region.
- This now compiles successfully for the ARC boards
em_starterkit_em7d and em_starterkit_em7d_v22. However,
as we lack ARC hardware to run this build on, we are unable
to test this build.
Current known issues:
1) While the script and edited CMakeLists.txt creates the
ability to align to the next power of 2, this does not
address the shortage of available MPU regions on certain
devices (e.g. 96b_carbon). In testing the APB and PPB
regions were commented out.
2) checkpatch.pl lists several issues regarding the
following:
a) Complex macros. The FOR_EACH macros as defined in
app_macro_support.h are listed as complex macros needing
parentheses. Adding parentheses breaks their
functionality, and we have otherwise been unable to
resolve the reported error.
b) __aligned() preferred. The _app_dmem_pad() and
_app_bmem_pad() macros give warnings that __aligned()
is preferred. Prior iterations had this implementation,
which resulted in errors due to "complex macros".
c) Trailing semicolon. The macro init_part(name) has
a trailing semicolon as the semicolon is needed for the
inlined macro call that is generated when this macro
expands.
Update: updated to alternative CONFIG_APPLCATION_MEMORY.
Added config option CONFIG_APP_SHARED_MEM to enable a new section
app_smem to contain the shared memory component. This commit
seperates the Kconfig definition from the definition used for the
conditional code. The change is in response to changes in the
way the build system treats definitions. The python script used
to generate a linker script for app_smem was also midified to
simplify the alignment directives. A default linker script
app_smem.ld was added to remove the conditional includes dependency
on CONFIG_APP_SHARED_MEM. By addining the default linker script
the prebuild stages link properly prior to the python script running
Signed-off-by: Joshua Domagalski <jedomag@tycho.nsa.gov>
Signed-off-by: Shawn Mosley <smmosle@tycho.nsa.gov>
This commit adds the implementation that allows the ARM CPU
to recover from (otherwise fatal) MPU faults. A new error
reason, _NANO_ERR_RECOVERABLE, is introduced. The error
reason is used to suppress fault dump information, if the
error is actually recoverable.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Shouldn't declare this and then pull in headers, fixes
errors like "util.h:41:1: error: template with C linkage"
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Change the REGION_FLASH_ATTR macros to set the cache attributes on Flash
regions to "Outer and inner write-through. No write allocate.". This
matches the cache attributes used when the MPU is disabled.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Change the REGION_RAM_ATTR macro to set the cache attributes on RAM
regions to "Outer and inner write-back. Write and read allocate". This
matches the cache attributes used when the MPU is disabled.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix NORMAL_OUTER_INNER_WRITE_BACK_WRITE_READ_ALLOCATE_NONSHAREABLE, the
bufferable bit should be set, while the shareable one should not be set.
At the same time, rename it from ..._NONSHAREABLE to _NON_SHAREABLE to
keep the same naming convention for all macro. Given it's not (yet)
used, it should not be an issue.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reduces the number of mpu regions statically reserved at boot time by
one, giving a total of five. We originally sought to reduce the total to
three: 1 background region with lowest precendence for supervisor r/w, 1
flash region, and 1 sram region. However, the nxp mpu hardware does not
give precedence to any region over another, and thus we cannot revoke
access from the background region with a higher priority region. This
means we cannot support hardware stack protection with a single
background region.
Instead, create two background regions that cover the entire address
space, except for sram.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
