LL_EXTI_LINE_18 and LL_EXTI_LINE_20 are declared in stm32f7xx_hal_pcd.h
and in stm32f7xx_ll_exti.h which generates warnings. Set #ifndef
in stm32f7xx_ll_exti.h around declarations.
STBugtracker: 55274
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
LL_EXTI_LINE_18 and LL_EXTI_LINE_20 are declared in stm32l4xx_hal_pcd.h
and in stm32l4xx_ll_exti.h which generates warnings. Set #ifndef
in stm32l4xx_ll_exti.h around declarations.
STBugtracker: 55275
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
A new CAN API is now provided in stm32cube packages.
STM32 can driver is implemented on top of initial CAN API which
is now legacy API.
Disable new API and enable legacy.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Format all cube packages to the same format before update to new
versions:
-Apply dos2unix
-Remove trailing white spaces
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Format all cube packages to the same format before update to new
versions:
-Apply dos2unix
-Remove trailing white spaces
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Format all cube packages to the same format before update to new
versions:
-Apply dos2unix
-Remove trailing white spaces
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Format all cube packages to the same format before update to new
versions:
-Apply dos2unix
-Remove trailing white spaces
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Format all cube packages to the same format before update to new
versions:
-Apply dos2unix
-Remove trailing white spaces
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The error is detected if USART1 TX configured to PA9 and RX to PA10.
The serial cable removal stops the USB communication.
In case of VBUS sensing deactivation, erroneously
both USB_OTG_GCCFG_VBUSBSEN and
USB_OTG_GCCFG_NOVBUSSENS are set in GCCFG.
Correct handling is:
- VBUS sensing deactivation: set USB_OTG_GCCFG_NOVBUSSENS in GCCFG.
- VBUS sensing activation: set USB_OTG_GCCFG_VBUSBSEN in GCCFG.
ST Bug Tracker ID: 34714
Signed-off-by: Istvan Bisz <istvan.bisz@t-online.hu>
A new CAN API has been delivered on recent L4 stm32cube.
This new API breaks current CAN driver. Disable the new API and
enable the legacy API.
Fixes#8931
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
A new CAN API has been delivered on recent F7 stm32cube.
This new API breaks current CAN driver. Disable the new API and
enable the legacy API.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
A new CAN API has been delivered on recent F4 stm32cube.
This new API breaks current CAN driver. Disable the new API and
enable the legacy API.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The I2SR field should be shifted by RCC_PLLI2SCFGR_PLLI2SR_Pos when the
PLLI2SCFGR register is read or written. Without this patch the PLLI2S
configuration is not done properly (R and M params are badly set) and
the PLLI2S generates bad clock waveform.
ST Bug tracker ID: 50108
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The I2SR field should be shifted by RCC_PLLI2SCFGR_PLLI2SR_Pos when the
PLLI2SCFGR register is read or written. Without this patch the PLLI2S
configuration is not done properly (R and M params are badly set) and
the PLLI2S generates bad clock waveform.
ST Bug tracker ID: 50086
Signed-off-by: Armando Visconti <armando.visconti@st.com>
This adds the HAL code needed for the SoC for the stm32f2 series.
Origin: ST Microelectronics
License: BSD-3-Clause
URL: http://www.st.com/en/embedded-software/stm32cubef2.html
Commit: 1.7.0
Purpose: HAL layer for stm32f2
Maintained-by: External
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Update Cube version for STM32L4XX family
from version: V1.10.0
to version: V1.12.0
This version solves patch in drivers/include/stm32l4xx_ll_spi.h
Note: git shows 100% diff on all files.
You need to tick "Ignore space change" in git UI to see real
differences. I tried different things to fix this without
success (dos2unix, file encoding, files access right).
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update Cube version for STM32F7XX family
from version: V1.8.0
to version: V1.11.0
Note: git shows 100% diff on all files.
You need to tick "Ignore space change" in git UI to see real
differences. I tried different things to fix this without
success (dos2unix, file encoding, files access right).
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update Cube version for STM32F3XX family
from version: V1.9.0
to version: V1.9.1
Fixes both patches:
- Wrong LSI value
- Issue in LL_SPI_TransmitData16
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update Cube version for STM32F1XX family
from version: V1.6.0
to version: V1.6.1
Note: git shows 100% diff on all files.
You need to tick "Ignore space change" in git UI to see real
differences. I tried different things to fix this without
success (dos2unix, file encoding, files access right).
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Bool symbols implicitly default to 'n'.
A 'default n' could make sense e.g. in a Kconfig.defconfig file, if you
wanted to override a 'default y' on the base definition of the symbol,
but it doesn't seem to be used like that on any of these symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The STM32L4x2 SoCs need to control the isolation of the USB features
from VDDUSB. This is done through the PWR_CR2 bit USV. The STM32L4 HAL
in stm32l4xx_ll_pwr.h wrongly checks for the PWR_CR2_PVME1 bit, which
is only available on Cat. 3 devices. Replace the check by PWR_CR2_USV
like it is already done in stm32l4xx_hal_pwr_ex.c.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
stm32l0xx_ll_spi.h causes compile warnings about aliasing.
Solution for F0 works here as well.
Tested on STM32L073RZ with 16-bit transfers.
Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
STM32Cube doesn't provide a USB LL API for STM32L0XX series.
This patch removes stm32l0xx_ll_usb.c from CMakeLists because
it doesn't exist.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
This adds the HAL code needed for the SoC in a later patch for
the stm32l0 series.
Origin: ST Microelectronics
License: BSD-3-Clause
URL: http://www.st.com/en/embedded-software/stm32cubel0.html
Commit: 1.10.0
Purpose: HAL layer for stm32l0
Maintained-by: External
Signed-off-by: Endre Karlson <endre.karlson@gmail.com>
To comply with Zephyr Contributing guidelines regarding
ext/ components, update README for STM32L4 series
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
To comply with Zephyr Contributing guidelines regarding
ext/ components, update README for STM32F7 series
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
To comply with Zephyr Contributing guidelines regarding
ext/ components, update README for STM32F4 series
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
To comply with Zephyr Contributing guidelines regarding
ext/ components, update README for STM32F3 series
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
To comply with Zephyr Contributing guidelines regarding
ext/ components, update README for STM32F1 series
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
To comply with Zephyr Contributing guidelines regarding
ext/ components, update README for STM32F0 series
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Reduce the code duplication in ext/hal/st/stm32cube/CMakeLists.txt by
using a foreach loop instead of copy-paste for each SoC.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The generic library provided by ST in ext/hal/st/lib/sensor/vl53l0x
needs to be adapted to the platform. In this case, the main
modification is the way to use I2C. This is now using the Zephyr
I2C API.
Signed-off-by: Vincent Veron <vincent.veron@st.com>
In order to ease the usage of its sensors, STMicroelectronics provides
some generic libraries. The first sensor to use that is vl53l0x time of
flight sensor. I have made the implementation generic enough to add some
more libraries in the future.
All the libraries will be located in ext/hal/st/lib.
The vl53l0X library is made of 2 parts :
* the core, that is generic to all platforms
* the platform, contains the adaptation layer. This will be
implemented in driver as it is Zephyr specific.
Origin: ST Microelectronics
License: BSD-3-Clause
URL: http://www.st.com/en/embedded-software/stsw-img005.html
Commit: 1.0.2
Purpose: API to ease the usage of vl53l0x sensor
Maintained-by: External
Signed-off-by: Vincent Veron <vincent.veron@st.com>
By providing USE_STM32_HAL_* and USE_STM32_LL_* menuconfig
options drivers and user aplications can select parts of the HAL
without needing to change the Zephyr source code.
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
Current implementation of LL_SPI_TransmitData16 on F0 family
generates following warning:
"warning: dereferencing type-punned pointer will break strict-aliasing
rules [-Wstrict-aliasing]"
Besides being forbidden by rule, this cast is not needed, as register is
16 bits wide. Modification has been tested on F0 SoC.
stm32yyxx_ll_spi.h being included in soc.h file, warning is generated
at each compiled object, this commit allows a clean build.
This issue is referenced in ST and tracked under
reference 13359. Code will be updated on upcoming stm32cube updates.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
