Align netusb driver with interface state handling update. Instead of
bringing the interface up/down from the driver level, use carrier on/off
notification to update the inteface state.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
DFU on Windows with WinUSB driver failed with "Lost device after RESET?"
error because WinUSB does not support host initiated resets. USB Device
Firmware Upgrade Specification Revision 1.1 attribute bitWillDetach can
be used to overcome WinUSB reset limitation. When bitWillDetach is set,
it is the device responsibility to detach and reattach itself to the bus
after receiving DFU_DETACH request.
Add and enable by default USB_DFU_WILL_DETACH configuration option,
because it is the only way to support WinUSB driver. WinUSB driver is
preferable because it can be automatically installed on Windows 8 and
later if USB device implements WCID descriptors.
Fixes: #49821
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
SD stack requires a larger stack size than the default value for the
mass storage stack thread. Increase the default stack size to 768 when
the SD stack is enabled.
Fixes#49057
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
We cannot implement configure API because there is
no notification of configuration changes provided
for the Abstract Control Model and the UART controller
is only emulated.
However, it allows us to use CDC ACM UART together with
subsystems like Modbus which require configure API for
real controllers.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Implement the uart_config_get() API by converting the existing
line coding structure to the struct uart_config format.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In the function tx_work_handler, a pointer to ring buffer data is given
to usb_transfer then the ring_buf_get_finish is called. So, the data is
mark as read (by ring_buf_get_finish) while the data are not yet
transferred to usb. If later a user send data, the pointer hold by usb
stack could be rewrite.
Signed-off-by: Julien D'Ascenzio <julien.dascenzio@paratronic.fr>
idle_rate is uint8_t, sof_cnt is uint32_t. The result is uint32_t, which
is the wrong type for 'abs'. Explicitly cast idle_rate to uint32_t,
subtract sof_cnt and then explicitly cast to int32_t and then use abs,
storing the result in another int32_t which matches the return type for
abs.
This quiets clang warnings about passing unsigned values to abs.
Signed-off-by: Keith Packard <keithp@keithp.com>
Devices using the MCUX FlexSPI flash driver erase their flash too
slowly, causing the usb stack to freeze, and USB DFU utilities to
report a timeout. Enable IMG_ERASE_PROGRESSIVELY for SOCs using the
MCUX FlexSPI driver to prevent this error.
Fixes#45359
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Move include paths and add new target_include_directories to support
backwards compatibility:
* /include -> /include/zephyr
example: <irq.h> -> <zephyr/irq.h>
Issue #41543
Signed-off-by: Yuval Peress <peress@google.com>
Until now the whole USB device stack code is located
in the top subsys/usb directory. Move it to own directory
in preparation for upcoming extension and rework of USB support.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
