Add a sample presenting ipc_service working with icmsg multi endpoint
backend. The sample creates multiple instances of icmsg, one of them
consisting of two endpoints.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Updates the location of the shared memory buffer to account for
memory map chains with `mps2_an521_remote`.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Updates the location of the shared memory buffer to account for
memory map chains with `mps2_an521_remote`.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
It was found that the existing regex check was not enough to validate
correctness of execution of mass samples. Tests would pass even when
a filesystem failed to be mounted. An additional line to check is added
to validate the setup of a filesystem.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
This removes some modules and functionality from the sample to
reduce the output application size to assist in fitting it to MCUs
with less flash storage space.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This commit fixes the overlay file for running the
samples/subsys/fs/littlefs on the nucleo_h743zi platform.
The storage_partition is moved to the qspi_nor flash
instead of the internal flash.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This commit updates the cpp_synchronization to run on the "POSIX
architecture" boards such as `native_posix`, since the POSIX arch now
properly supports the main() defined in a C++ source file.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
This commit updates the cpp_synchronization sample to enable
`CONFIG_CPP_MAIN` since it defines its main() in a C++ source file.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
Now that IPM drivers are enabled based on devicetree we can
remove any cases of them getting enabled by Kconfig, *defconfig*,
and *.conf files.
We need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Remove all obsolete DISK_FLASH* Kconfig options.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add flash disk description to overlays. Specify custom flashdisk
partition for fat fs api test to match the Kconfig values, because
native posix storage partition is too small for FatFS filesystem.
Co-authored-by: Johann Fischer <johann.fischer@nordicsemi.no>
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
New filter "TOOLCHAIN_HAS_NEWLIB == 1" was applied
because of following chain of dependencies:
LOG_MIPI_SYST_ENABLE=y --> CONFIG_MIPI_SYST_LIB --> \
--> REQUIRES_FULL_LIBC --> NEWLIB_LIBC.
Not all compillers announced in Zephyr support NewLib.
Signed-off-by: Nikolay Agishev <agishev@synopsys.com>
Avoid reusing the CAN_EXTENDED_IDENTIFIER and CAN_STANDARD_IDENTIFIER
definitions from the CAN controller driver API for ISO-TP structure members
as this is a fragile design.
The ISO-TP layer must be responsible for its own definitions where
needed. Replace the "id_type" ISO-TP struct member with a well-known
abbreviated "ide" bit (Identifier Extension Bit) struct member.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Fixes an issue with a possible stack overflow when using the
Bluetooth transport for large mcumgr transfer, the issue was caused
by moving to a dedicated workqueue but not moving the enlarged
system workqueue overlay to the new smp workqueue.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Implementing USB-C Sink functionality can be difficult.
This sample application serves as an example of how
to create an application with Power Delivery Sink
functionality.
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
For samples that set CONFIG_MP_NUM_CPUS=1, switch to using
CONFIG_MP_MAX_NUM_CPUS=1 instead as we work to phase out
CONFIG_MP_NUM_CPUS.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Change automated searching for files using "IRQ_CONNECT()" API not
including <zephyr/irq.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Make the sample exchange the data between cores
for predefined time. Clean up logging messages
and do not print transfer speed on each side.
This sample is now used to demonstrate functionalities
of ipc service with icmsg backend.
Signed-off-by: Emil Obalski <Emil.Obalski@nordicsemi.no>
Adding multidomain support by introducing log_link module which
acts as a receiver of log messages created by another domain.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit adds two new commands to flash shell tools: flash load and
flash page_info.
Signed-off-by: Franciszek Zdobylak <fzdobylak@internships.antmicro.com>
The iodev submission queue existed but wasn't easily constructed as
there was no macro to define it.
Adds a simple macro wrapper around RTIO_SPSC_DEFINE for creating
the RTIO IO Device Submission Queue enabling each IO device to
have its own pending queue of requests.
The sample has been updated to use the iodev submission queue rather
than a k_msgq.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Enable SDL keyboard events using the zephyr,gpio-emul-sdl driver and
alias key to sw0.
Pressing 'r' on the keyboard resets the counter.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The `cfb_custom_font` sample has been relocated from `samples/display`
to `samples/subsys/display`.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
The twister docs specify that `platform_allow` should only be used
if applications can only possibly run on the specified platforms. This
is not the case for these applications, which should be able to run on
any board with LoRa support.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Issue #49960 showed that individual regions can fail to compile when
enabled. As requested in #50626, validate that each region compiles in
CI.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Exclude lpcxpresso55s69_cpu0 from the USB DFU tests, this triggers a
build assert due to unsupported flash write block size (512 bytes,
mcuboot supports 8 to 32).
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The FRDM-K64F board has a SD/MMC slot. This patch modifies the DTS
files so that this feature works out of the box. This includes
configuring the SPI peripheral connected to the slot on the board.
This change follows the SD/MMC support for other boards, e.g.
Olimexino-STM32. It was tested on a FRDM-K64F board with the
fat_fs sample.
Signed-off-by: Marek Materzok <tilk@tilk.eu>
Even though we have unit tests that cover the PM policy latency APIs, it
may not be obvious on how to use it in practice. This patch adds a new
sample where both the application and a device driver impose latency
requirements. The sample illustrates how latency requirements are
aggregated and are taken into account when choosing the CPU power state.
The test has been designed to run on native_posix, since it only serves
for demonstration purposes.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
add user data for adu callback, which helps in passing
socket and relevant application parameters.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
Some test cases in the module `samples` have not a name of this module.
This change adds the name `sample` to these test cases.
Signed-off-by: Katarzyna Giadla <katarzyna.giadla@nordicsemi.no>
