Add alias to overlays for boards that switch the watchdog to be
used while running this sample.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Any project with Kconfig option CONFIG_LEGACY_INCLUDE_PATH set to n
couldn't be built because some files were missing zephyr/ prefix in
includes
Re-run the migrate_includes.py script to fix all legacy include paths
Signed-off-by: Tomislav Milkovic <milkovic@byte-lab.com>
Merge the fpga_controller and fpga_controller shell
sample applications and add sample.yaml to enable testing in
twister.
Fixes#47613
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
The sam0 ADC driver has ADC_CONFIGURABLE_INPUTS enabled, which means
that the device tree ADC nodes must include the zephyr,input-positive
property.
Signed-off-by: Attie Grande <attie.grande@argentum-systems.co.uk>
Removes deprecated conf files from the counter/alarm
sample and adds overlays to enable timer nodes in use.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
hifive_unmatched has a jedec,spi-nor flash node, however we have no
SPI driver for the controller so exclude the platform from this sample.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Add an overlay for rpi_pico board to the led_pwm sample.
This board only supports fairly high pwm frequencies so
the blinking of the LED is not supported. Turning it on/off
and fading is.
Signed-off-by: Joep Buruma <burumaj50@gmail.com>
As we phase out usage of 'label' devicetree property, remove uses
of DT_LABEL. Replace DT_LABEL with swN_spec.port->name.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Following zephyr's style guideline, all if statements, including single
line statements shall have braces.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample should be executed only when connecting external
hardware (Led strip). Thus it is necessary to add fixture to avoid
execution when no hardware is connected.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
This sample can only be tested if the DUT has external memory
connected. This commit aligns the yaml description, so the test
is not picked up on setups without required fixture.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Move to use DEVICE_DT_GET instead of device_get_binding as we
work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
As Zephyr currently requires CMake version 3.20.0, update all
occurrences of cmake_minimum_required.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This commit moves the hardware configuration for ledc
peripheral to the device-tree instead of Kconfig.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
This commits prefixes all the definitions
with 'SPI_' to be used by the sample application.
This will avoid compilation conflict especially
on FLASH_SECTOR_SIZE.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Replace 'platform_allow' with 'filter' based on ws2812 compatible
being enabled. This will allow, for example, to run the sample on
mimxrt1050_evk and mimxrt1050_evk_qspi boards.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Some of the Panasonic's evaluation boards have limited amount of pins.
So not all arduino pins can be occupied and not all shields are
compatible.
Signed-off-by: Steffen Jahnke <steffen.jahnke@eu.panasonic.com>
Logging v1 has been removed and log_strdup wrapper function is no
longer needed. Removing the function and its use in the tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Whenever MBEDTLS_BUILTIN is selected then
CONFIG_MBEDTLS_CFG_FILE="config-tls-generic.h" is set as a default value.
Remove explicit configuration from prj_mtls_shim.conf.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Files including <zephyr/kernel.h> do not have to include
<zephyr/zephyr.h>, a shim to <zephyr/kernel.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Inform about the requirement to configure ADC channels in Devicetree
- Fix sample output example
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Improve include list, so that file is self-contained
- Don't use an array type for the samples buffer, as its length is 1
- Improve some error messages
- Use PRId16/32 for printing fixed-width signed integers
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Simplify sample by relying exclusively on channel data from Devicetree.
This change makes sample simpler and more portable at the same time.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
It is now possible to configure ADC channels in Devicetree. This makes
code more portable, since there is no need to hardcode hardware specific
bits in the C sources.
This patch adds channel/s configuration for all support sample overlays.
Hardcoded values have been used:
- Resolution: 12-bit
- Gain: 1
- Reference: internal
- Acquisition time: default
Some nRF channels have been adjusted to include resolution as well.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This is a follow-up to commit f5ffd05e6b.
Since twister removes leading spaces from received lines before
further processing, the regular expression for checking the output
produced by the sample cannot contain such space. Also negative
values read from ADC channels need to be allowed.
For consistency, remove the leading space also in the actual string
printed by the sample.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
