Use the back-to-back receive of PDU with a
configurable inter frame spacing. This fixes an issue
when nRF53 was able to receive only one Rx PDU and
was not able to switch to next Rx.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
Add Radio interface to perform back-to-back receive of PDU
with a configurable inter frame spacing.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This command is used to obtain 'Implementation eXtra Information for Test'
(IXIT) values that are required to proceed with BT qualification tests.
Signed-off-by: Tim Sørensen <tims@demant.com>
Fix uninitialized param field when generating incomplete
no more data to come periodic advertising report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix generating periodic advertising reports post sync
terminate under race condition when disabling reporting or
terminating the sync or while performing HCI reset.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added BUILD_ASSERT definition to check for safe access to
memory pool allocated memory structure member after the
memory has been released back to mem pool.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
- Implemented ISO-AL TX interface functions for fragmentation of
unframed PDUs
- Implemented ISO-AL source construct and its creation for an input
data path
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Use the received coding scheme when receiving Periodic
Advertising PDUs for correctly calculating the receive
chain delay and on-air PDU time.
Relates to commit 6911e7e1d8 ("Bluetooth: Controller: Use
the received coding scheme when scanning").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use the received coding scheme when receiving Extended
Advertising PDUs for correctly calculating the receive
chain delay and on-air PDU time.
Relates to commit 6911e7e1d8 ("Bluetooth: Controller: Use
the received coding scheme when scanning").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix compile error when debug pins are enabled for nRF53
Series SoCs.
Regression introduced in commit 743b0583fc ("Bluetooth:
controller: Enable debug pins with TF-M enabled").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing assignment of SID in the Periodic Advertiser
Accept List. This cause advertisers with SID 0 only to be
accepted when using list.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Tx Power field in Extended and Periodic Advertising
for chain PDU reception. Tx Power shall be from the
current PDU containing the AD Data, Scan Response Data and
from first PDU of Periodic Advertising Data be used to
prepare the HCI report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The header file radio_df_vendor_hal.h was conditionally copiled in.
There were a dependency on a CONFIG_BT_CTRL_DR. The dependency is
removed because radio_df_vendor_hal.h and radio_df.h hasn't got any
DF related type dependencies. What more it allows to use IS_ENABLED
for code that uses types and functions defined in radio_df.h.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The EVENTS_CTEPRESENT is available when radio peripheral has
direction finding support. The event is set if received
PDU has CTEInfo and there were collected IQ samples during
CTE reception.
The event should be cleared always when other events are cleared.
That guarantees that the event is not set when use of radio for
following activities.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The radio_df_cte_ready function returns state of EVENTS_CTEPRESENT.
The function may not be used in create_iq_report function, because
it is called after lll_isr_rx_status_reset. The lll_isr_rx_status-
_reset clears EVENTS_CTEPRESENT value.
The result of this calls chain is lack of IQ sample report no matter
if the PDU has CTEInfo and radio has collected IQ samples.
To fix the problem, state of EVENTS_CTEPRESENT has to be get when
e.g. rssi_ready is get.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
As Extended Advertising primary PDUs do not use ticker
remainder value for fine scheduling of radio events, do not
use the remainder value for auxiliary PDUs. This fixes the
jitter in the aux_offset value that caused the auxiliary PDU
being observed to be late compared to the aux_offset value
filled in the primary PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This adds support for the following Direct Test mode
commands:
- HCI LE Receiver Test [v3]
- HCI LE Transmitter Test [v3]
- HCI LE Transmitter Test [v4]
Those commands set add a possibility to test an CTE
reception and transmission. The HCI LE Transmitter
Test [v4] commands allows also setting a transmit power.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
If peer sends invalid data length in response IUT should fix those
when calculating effective data length.
This was affecting following qualification test cases:
LL/CON/PER/BI-10-C
LL/CON/PER/BI-11-C
LL/CON/PER/BI-12-C
LL/CON/CEN/BI-07-C
LL/CON/CEN/BI-08-C
LL/CON/CEN/BI-09-C
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Avoid pre-empting scan window when extended active scanning.
If a scan request has been transmitted, then avoid being
pre-empted at the end of window when in continuous scanning.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix power amp for transmitting of chain scan response
wherein capture of PDU end timestamp was missing causing
power amplifier from not being enabled for first chain PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix auxiliary context from being flushed when scanner or
periodic synchronization is stopped, to avoid using the
disable_cb by both. Fixes an assertion when this race
condition happens.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Do not enqueue NODE_RX_TYPE_RELEASE into Auxiliary context
when stopping scanner, as this type is not to be passed to
HCI processing, which would lead to assertion.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix auxiliary context leak on stop, under race condition
where ULL High execution context does not release the
auxiliary context as stop has been requested, and done
has decremented the auxiliary context's reference count.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the order of Periodic Synchronize reset during HCI
Reset Command. Perform scan reset last after Periodic
Synchronize reset to avoid resetting the auxiliary
context which may be in use by Periodic Synchronize.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Instead of including from nrfx_glue.h a specific Zephyr Bluetooth
controller header file that defines PPI and GPIOTE resources to be
reserved for exclusive use by the controller, include a file with
only a fixed name and expect the chosen Bluetooth controller to
provide the location of this file in include paths. This way, when
a different Bluetooth controller implementation is used downstream,
a different file can be easily pointed to.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Rename
BT_CTLR_LLCP_PROC_CTX_BUF_NUM
to
BT_CTLR_LLCP_LOCAL_PROC_CTX_BUF_NUM
to match naming scheme of
BT_CTLR_LLCP_REMOTE_PROC_CTX_BUF_NUM
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Add a separate procedure context pool for remote initiated procedures.
Make it configurable in size by BT_CTLR_LLCP_REMOTE_PROC_CTX_BUF_NUM.
Fix all unit tests referring to the amount of free context buffers.
Fixes#41823
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Move the mem_pool structure to the internal header for wider access.
Introduce a mem_pool owner in the proc_ctx, sch that multiple mem_pool
could be used for memory management of proc_ctx, also static 'foreign'
allocated proc_ctx would be supported by this.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Start of the antenna switching and sampling CTE is configured by use
of DFECTRL2 register in Nodric Radio peripheral. As of now the
configuration was set to defaults, so antenna switching has started
immediately after CTE procedure was started (end of CRC).
Sampling was started at the very beginning of a sampling slot.
It should be delayed for at least 125 ns from beginning of sampling
slot and not more than 125 ns to the end of sampling slot. This is a
requirement from BT 5.3 Core specification Vol 6, Part B section 2.5.4
IQ sampling.
Although it seems to me that when samples are taken depends on
implementation and used hardware. Taking that into account
there is provided a set of KConfig options to configure samples
offset for PHY 1M, PHY 2M and sapling slots 1 us and 2us separetely.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
If there is enabled support for ADI in periodic advertising and
periodic advertising uses chained PDUs there is an assert when
periodic advertising is re-enabled.
There is missing a code that will set a chain for PDU with
updated ADI field.
The commit fixes the issue.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Check if the CTE was discovered by Radio peripheral should be
done with use of CTEPRESENT event. Samples count should not
be used for that purpose. If samples count is a value different
than zero for PDUs that don't have CTE, unwanted IQ samples
report will be generated. CTEPRESENT event is set only in case the
CTEInfo filed was correctly parsed by Radio peripheral during
PDU reception.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fix Extended Advertising implementation to setup Power
Amplifier (PA) GPIO toggle for transmission instead of
incorrect Low Noise Amplifier (LNA) setup which is for
reception.
Relates to commit 4e5290948e ("Bluetooth: Controller: Fix
Periodic Advertising to setup Power Amp").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Do not implicitly allocate Rx buffers for maximum chain PDU
reception. Instead let applications increase as required the
Kconfig CONFIG_BT_CTLR_RX_BUFFERS.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing configure of Device Address Matching when
receiving auxiliary PDUs.
This fixes some privacy related conformance test cases.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing RPA timer start in Broadcaster only controller
builds.
Without the fix private resolvable addresses where not
updated at RPA timeout.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing implementation to update private resolvable
address in auxiliary PDUs on RPA timeout.
Without the implementation the controller asserted on RPA
timeout when AdvA is not present in the primary channel PDU
of Extended Advertising set.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing reset of sync create association with scan
context when associated with both 1M and Coded PHY contexts,
and sync create cancel is called.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix address resolution when trying to match the maximum
entries in the resolving list.
Wait for address resolution AAR peripheral to complete with
checking with all the entries in the IRK list.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix k_sem_give() from being called from Zero Latency IRQs
when the Controller is configured with BT_CTLR_ZLI=y.
Kernel features shall not be used from Zero Latency IRQs as
these IRQs cannot be locked by the kernel to maintain
context safety of the kernel objects.
Relates to commit 92e017fd70 ("Bluetooth: controller:
split: Support Zero Latency IRQs") and
commit c842eef3ae ("Bluetooth: controller: Add semaphore
to indicate free AD data buffers").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
sw_switch implementation uses two parallel groups of
PPIs connecting radio and timer tasks and events.
The groups are used interchaneably, one is set for
following radio TX/RX event while the other is in use
(enabled).
The group should be disabled by timer compare event that
starts Radio to TX/RX a PDU. The timer is responsible for
maintenance of TIFS/TMAFS. The disabled group collects
all PPIs required to maintain the TIFS/TMASF. After
the time is reached Radio is started and the group is
disabled. It will be enabled again by software radio
swich during next call.
If the group is not disabled then it will work in parallel
to other one. That causes issues in correct maintenance of
instant when radio shoudl be started for next TX/RX event
e.g. radio may be enabled to early.
In case the PHY CODED was enabled and periodic advertising
included chained PDUs, that are transmitted back-to-back,
there was missing group delay disable. The missing case was
sw_switch function called with dir_curr and dir_next set
to SW_SWITCH_TX.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
