- Use a native_posix specific overlay for non-SoC devices
- Remove redundant per-driver Kconfig selections
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In the continuation of the previous commit, replace _OPT_ by _DOMAIN_
in macros relating to this feature.
hen, adapt drivers and tests to this new wording.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
* Move test to using devicetree for various "device" params.
* Move test to using spi_dt_spec to simplify code
Signed-off-by: Kumar Gala <galak@kernel.org>
This driver can't be compiled on all platforms as it's a NXP specific
driver (requires NXP HAL). Because spi.dtsi file is used by app.overlay
(and so enabled in multiple configs, including native_posix) it needs to
be removed. Note that MCR20A driver is already covered by the
ieee802154.build.mcr20a test case, which runs specifically on a NXP
board.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
in NXP platform, src address shall be 4 bytes alligned
adding this restricting to test cases
fixing: #48512
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Currently the level triggered test disables the interrupt in
the first callback. This doesn't test interrupt re-entry if the
gpio level is unchanged.
This commit adds an option to disable the interrupt after
several calls and adds two tests with the extra condition.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Now that ADC drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Typically the Kconfig.defconfig* will blindly enable a
sensor and not respect the devicetree state of the ADC.
Additionally we can get problems with prj.conf/defconfig
getting incorrectly overridden.
Signed-off-by: Kumar Gala <galak@kernel.org>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Now that I2C drivers are enabled based on devicetree we can remove
any cases of them getting enabled by *defconfig and proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Exclude the 20kbit/s CAN timing test from running on the Espressif ESP32
TWAI driver. The TWAI does not support bitrates below 50kbit/s due to the
combination of CAN clock and prescaler range.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
In tests/drivers/clock_control/stm32_clock_configuration/stm32u5_devices
test suite, core_init.overlay configure msis to use pll-mode.
Since pll-mode is not configured for msik in spi1_msik variant the test
fails since both clocks should support the same configuration regarding
pll mode (an assert in raised in the driver).
Fix this in spi1_msik test variant.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add testcase filter based on devicetree alias "dma0" being set. This
is needed since the testcase requires it to build.
Signed-off-by: Kumar Gala <galak@kernel.org>
Add testcase filter based on devicetree nodelabel test_dma being set.
This is needed since the testcase requires it to build.
Signed-off-by: Kumar Gala <galak@kernel.org>
Add testcase filter based on devicetree nodelabel test_dma being set.
This is needed since the testcase requires it to build.
Signed-off-by: Kumar Gala <galak@kernel.org>
1. config ztest_new_api and update the testcase defines
2. remove shell interactive test cases, twister has another plan
3. add sg case support for kinetis and rt10xx platfrom
related: #47002
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Now that clock control drivers are enabled based on devicetree we
can remove any cases of them getting enabled by *defconfig and
proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Instead of enabling WOVCRO clock based on the SOC, use a configuration
to indicate support, so that each platform can specify if WOVCRO is
supported or not.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
The UC8176 and UC8179 chips that exist in tree have subtly different
register layouts. Use separate compatible strings for these chips and
a quirks structure that describe device-specific behavior.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
The GD7965 driver is really just a vendor name for the UltraChip
UC8179. Rename the driver to UC81xx since there are other chips in the
family (e.g., the UC8176) with an almost identical register interface.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Now that SPI drivers are enabled based on devicetree we can remove
any cases of them getting enabled by *defconfig and proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Convert test to use DEVICE_DT_GET via a nodelabel.
Introduce a test_dma devicetree nodelabel to reference the DMA
controller the test should use.
Signed-off-by: Kumar Gala <galak@kernel.org>
Convert test to use DEVICE_DT_GET via a nodelabel.
Introduce a test_dma devicetree nodelabel to reference the DMA
controller the test should use.
Signed-off-by: Kumar Gala <galak@kernel.org>
Now that gpio drivers are enabled based on devicetree we can remove
any cases of them getting enabled by *defconfig and proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Intel ADSP CAVS is now a proper series with all CAVS SoCs running under
it. This will give us to Intel ADSP series:
- CAVS
- ACE v1.x
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Sensor Kconfig sybmols should be enabled if CONFIG_SENSOR=y
and the devicetree node for the sensor is enabled. We can
remove explicitly enabling specific sensor drivers in .conf
files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Replace Kconfig (IVSHMEM_DEV_NAME) based named device_get_binding
with DEVICE_DT_GET_ONE. Since there is only one driver for ivshmem
use the qemu,ivshmem for that.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to using a devicetree nodelabel (test_regulator) to reference
the regulator device to test. This lets us remove use of Kconfig
as well as device_get_binding().
Signed-off-by: Kumar Gala <galak@kernel.org>
The SPI flash were recently changed to use an alias to identify the
flash chip in:
64fbbd9a44 boards: Add alias to boards with spi-flash node
This caused some CI test failure for the nrf52840dk test with the
nrf52840dk_mx25l51245g overlay, as it changes the flash nodelabel of the
board dts file. Adding the correct alias to the overlay file to point to
the correct one.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Give 1 second boot delay when running coredump tests on ACRN. Because
the zephyr's log from ACRN console cannot output completedly before
this time.
Fixes#47010.
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
Kconfig will default to enable the drivers based on devicetree so
we don't need to explicitly set the Kconfig symbols.
Signed-off-by: Kumar Gala <galak@kernel.org>
