1. Update nxp irtc driver to fix issue in init and alarm function.
2. Update RTC device tree binding to support "share-counter".
3. Update RT700 dtsi to support rtc0 for cpu0 and rtc1 for cpu1.
4. Update readme.
5. Update unit test project conf for RT700.
Signed-off-by: Holt Sun <holt.sun@nxp.com>
- Add sink PACS register for PBP public broadcast sink example to make
it work with PBP broadcast source
Signed-off-by: Vinit Mehta <vinit.mehta@nxp.com>
Corrected a typo in the project name within the Bluetooth
samples directory. The incorrect name was causing confusion
in documentation and build processes. This change updates
the relevant file(s) to use the correct project name, ensuring
consistency across the Zephyr repository.
Signed-off-by: Gomaa Mohammed Eldebaby <gomaaeldebaby2211@gmail.com>
Add an nPM1304 EK shield, update samples/shields/npm1300_ek to support
both shields, improve the sample description.
Signed-off-by: Sergei Ovchinnikov <sergei.ovchinnikov@nordicsemi.no>
This commit adds a cellular modem overlay to the zperf sample, enabling
the use of zperf with a cellular modem.
Signed-off-by: Vytautas Virvičius <vytautas@virvicius.dev>
Add missing "memory-regions" property which is required for UART
on NRF54H20 to clock_control sample overlay file.
Signed-off-by: Michał Bainczyk <michal.bainczyk@nordicsemi.no>
Introduce a 1000 ms delay between consecutive sensor readings to prevent
logging overflow and reduce console clutter.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
Most pressure sensors provide temperature and pressure data, but only a
few support altitude readings. This change adds a check to ensure
altitude is logged only when the sensor supports it.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
As a first step to enable the similar variants (e.g: ICM42686),
refactor common functionality into icm4268x files. As a result,
applications using the icm42688 will need to have both compatible
properties: "invensense,icm42688" and "invensense,icm4268x" defined.
In-tree boards have been modified to comply with this pattern.
This patch does not contain functional changes. The driver should
work the same as before.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
this commit adds a sample code to illustrate the base usage
of message queues. a producer and a consumer thread work
together, exchanging messages in a FIFO (for normal payloads)
and LIFO (for higher priority payloads) schemes.
Signed-off-by: Alexander Paschoaletto <axelpinheiro@gmail.com>
Add an overlay to the st specific power_mgmt wkup_pins sample
for the nucleo_c092rc board.
The user_button on pc13 is used as the wakeup-src.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Since the netstats handler calls on functions which reach deep into the
networking stack, there is a lot of points actually at which it can be
blocked, even forever. So having this handler on the system workqueue is
not a good idea and can even cause a deadlock in some cases if it's
blocked waiting on a synchronization primitive that would be given by a
work item scheduled later in the queue. Therefore, make a workqueue
specifically for this http server socket instead of using the system
one.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Stop processing microphone data on error or when streaming ends. This
avoids I2S read timeouts due to audio data not being available while
streaming.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Refactor the default RAM memory map on nrf54h20dk:
Removes use of "nordic,owned-memory" which is no longer needed on
nrf54h20. Reserved memory nodes that were under "nordic,owned-memory"
have been moved directly under reserved-memory.
The memory shared between cpuapp-cpusec and cpurad-cpusec in RAM0x
is no longer used with IronSide, since IPC buffers toward the secure
domain are at new fixed locations. The cpuapp_data region
has been expanded to fill the available space in RAM0x when removing
these shared memory regions.
Signed-off-by: Jonathan Nilsen <jonathan.nilsen@nordicsemi.no>
This replaces the legacy SDFW compatible board configuration with the
IronSide SE compatible one, thus removing support for running samples
and tests on nRF54H20 devices with the old firmware.
All applications are expected to work on `nrf54h20dk/nrf54h20/cpuapp`
out of the box. For other board targets, all applications are expected
to boot, but may require additional peripheral configuration in UICR.
Build system support for the new UICR format is to be added separately.
Co-authored-by: Jonathan Nilsen <jonathan.nilsen@nordicsemi.no>
Signed-off-by: Jonathan Nilsen <jonathan.nilsen@nordicsemi.no>
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Switch which board is the remote in the test case for
mbox communication between nrf54h20dk/nrf54h20/cpuapp and
nrf54h20dk/nrf54h20/cpurad, making cpurad the remote instead.
This is done to prepare the sample for executing with IronSide SE,
where using cpurad as the main board doesn't make as much sense,
since cpuapp has to start cpurad.
Signed-off-by: Jonathan Nilsen <jonathan.nilsen@nordicsemi.no>
1. Supported ACMP case on mimxrt700_evk
2. Fixed the issue of using the same address for
different trigger sources. This bug would cause the
examples to run in a way that did not match the theory.
3. Removed some redundant descriptions in the README.rst.
Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
Board overlays were moved from downstream to upstream.
By mistake, License was left unchanged.
Change License type to match with the upstream.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
This commit adds virtiofs sample that presents use of this filesystem
Signed-off-by: Jakub Michalski <jmichalski@antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
A simple sample showing how an interrupt (or thread) could produce data
a thread (potentially a user mode thread) could then consume.
Some great suggestions added thanks to Luis Ubieda
<luisf@croxel.com> to show multishot in use which avoids extra
syscalls in the tight processing loop of the consumer.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
The Zperf sample application was chosen to demonstrate basic network
functionality and high-performance use cases. This application serves
as a reference for users who wish to enable other network sample
applications.
In addition to the essential configurations for the Intel i226 Ethernet
controller, stack-specific configurations were added to ensure stability
under heavy network loads. These configurations include adjustments to
buffer sizes, interrupt handling, and DMA descriptor management.
Signed-off-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>
When a board contains two identical flash memories configured in
parallel dual-flash mode, the actual sector size is twice the sector
size of a single flash memory. So, assuming 4-KiB sectors for each flash
memory, any erase operation must be 8-KiB aligned.
This commit updates the start offset and sector size in the spi_flash
sample to be properly aligned when a dual-flash configuration is used.
At the moment, this is only supported for STM32-based boards and QSPI
flash memories.
Signed-off-by: Thomas Altenbach <altenbach.thomas@gmail.com>
Apparently the simple python HTTPS server the sample is interfacing,
cannot handle parallel TLS sessions (just one at a time), hence
establishing both IPv4/6 connections before sending request doesn't work
well, half of the requests are dropped. Therefore, modify the sample a
little to run only one TLS (or TCP if no TLS is used) connection at a
time.
Additionally, add a log in case HTTP client request fails, as it could
easily be overlooked if something went wrong.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Python HTTPS server counterpart for the sample now seems to enforce
ECDHE key exchange, so enable it in the sample.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add stm32l1_disco and nucleo_l152re overlays for testing
sleep/stop/standby modes:
- samples/boards/st/power_mgmt/blinky;
- samples/boards/st/power_mgmt/wkup_pins;
I've measured consumption for each low-power mode:
- low-power sleep ~1.72mA;
- stop mode ~324uA;
- standby mode ~2.2 uA;
It's possible to use RTC as idle timer to exit from stop mode.
Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
The rtk7eka6m3b00001bu need addtional ek_ra8d1_rtk7eka6m3b00001bu shield
to build with ek_ra8d1/r7fa8d1bhecbd platform. This commit to update
extra args to select it when build with twister
Signed-off-by: The Nguyen <the.nguyen.yf@renesas.com>
The current sample was always trying to enable trigger mode in the
driver no matter what, causing issues for instances where the sensor
simply has no interrupt pin configured in Devicetree.
Cleaned things up so that enabling trigger mode is done via the
driver's Kconfig option, and cleaned up the Twister testcases
accordingly (plus, made sure they are actually built by setting
min_ram to a value compatibel with the nucleo_f334r8).
README has also been updated to clearly document how to enable
either mode.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Expand this sample to also work with GNSS_RTK through a serial client.
Make this compatible to work with VMU_RT1170 which requires using the
F9P, instead of the M8 UBX module.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Remove duplicated test configuration after
nrf54l20pdk/nrf54l20/cpuxxx was renamed to
nrf54lm20dk/nrf54lm20a/cpuxxx.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Add overlays required to run the sample on
- nrf54h20dk/nrf54h20/cpuapp,
- nrf54l15dk/nrf54l15/cpuapp,
- nrf54lm20dk/nrf54lm20a/cpuapp.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Remove duplicated test configuration after
nrf54l20pdk/nrf54l20/cpuxxx was renamed to
nrf54lm20dk/nrf54lm20a/cpuxxx.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Remove duplicated test configuration after
nrf54l20pdk/nrf54l20/cpuxxx was renamed to
nrf54lm20dk/nrf54lm20a/cpuxxx.
Extend platform_allow with other nrf54* targets (overlays for these
targets already exist in the boards directory).
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Remove duplicated test configuration after
nrf54l20pdk/nrf54l20/cpuxxx was renamed to
nrf54lm20dk/nrf54lm20a/cpuxxx.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Remove duplicated test configuration after
nrf54l20pdk/nrf54l20/cpuxxx was renamed to
nrf54lm20dk/nrf54lm20a/cpuxxx.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Add overlays used for testing differential mode support in STM32 ADC
driver:
- Nucleo F303K8
- Nucleo H753ZI
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
