Some backends use DMA. Usually, DMA doesn't work correctly, when memory
to transfer is cached. Add a config to place the common buffers in the
nocache section.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Disable and enable SPI module before every transaction for STM32H7
chips. It is a recommended way in the STM32 RM. In another case, a first
byte of a transaction is always 0x00.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
STM32H7 chips have additional configuration regarding underrun event.
Configure the underrun behaviour correctly to use the underrun pattern
and clear the underrun bit before sending new data.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Move enabling CS interrupt at the end of the backend configuration,
when everything is ready.
It prevents handling the interrupt, when something is not prepared e.g.
DMA is not configured.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Fix support for clock domains. Create define that identify if
clock domain was selected in any of the st_stm32_spi_host_cmd nodes.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Default the Minimum encryption key size to 16.
Key with reduced size is easier to brut force.
Disable LE legacy pairing by default since it's not secure.
These defaults should suite majority of newly developed applications.
It's better to use sensible more secure defaults,
so applications that really need less secure option consciously change it,
not the other way around.
This may help to prevent downgrade attacks.
Signed-off-by: Sergey Korotkov <sergey.korotkov@nordicsemi.no>
The deprecated CONFIG_NET_SOCKETS_POSIX_NAMES option is removed.
If one wishes to use POSIX API socket calls, then CONFIG_POSIX_API
option needs to be enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Log the create BIG params for debugging purposes.
Also slightly modifies the `qos` struct to use a more
suitable struct to avoid always doing `qos->tx->` and
can now just be `qos->`.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Referring to MshDFU_v1.0 Sections 6.1.1, 6.2.1 and 7.1.1 model
descriptions: DFU/DFD server/clients extend BLOB Transfer root models
and DFD server requires Firmware Update Client on the same element. For
this reason we need to make sure that those main models or root models
exist on the same element. And also firmware update client can not be
forced to be in the first element.
For all model extention call return the error code in case of an error.
Signed-off-by: alperen sener <alperen.sener@nordicsemi.no>
It is recommended to record the subunit type itself instead of the
subunit ID when validating the transaction. This approach is more
meaningful and less prone to misinterpretation.
Signed-off-by: Zihao Gao <gaozihao@xiaomi.com>
Deprecate BT_CTLR, and add a new HAS_BT_CTLR as a virtual option which
specific users (like BT_LL_SW_SPLIT) select. This also means that we can
remove all places that were forcefully enabling the BT_CTLR option, and
instead we now depend on devicetree to get some local LL HCI driver
enabled which in turn also enables the HAS_BT_CTLR option.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Removed implying of NVS by the NET_L2_OPENTHREAD, and from now a
platform can choose between ZMS and NVS as a settings backend.
NET_L2_OPENTHREAD still requires NVS or ZMS backend so the config
depends on one of those.
Signed-off-by: Arkadiusz Balys <arkadiusz.balys@nordicsemi.no>
lwm2m_engine_set() and lwm2m_engine_get() locks
the registry_lock mutex, but this is not unlocked
when setting or getting a time resource where the buffer
lengths are invalid resulting in an early return without
unlocking the mutex. This results in a deadlock when
attempting to lock the registry in another thread.
Signed-off-by: Steven Poon <steven-github@outlook.com>
The commit adds flash_area_sectors function that allows to get information
on sector/erase page layout by flash_area object pointer instead of
index.
The only difference between flash_area_sectors and flash_area_get_sectors
is that the later calls flash_area_open internally and as such requires
flash map to be compiled in.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds FIXED_PARTITION(label) macro that allows to obtain
struct flash_area object for partition of given label.
The macro allows instantiation of partition at point of usage
and will be replacing need for defining flash map with all partition
entries.
Area obtained with the macro should not be passed to open, instead
flash_area_device_is_ready, basically equivalent of device_is_ready
should be called on the obtained pointer to check if area is ready
for use.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Removes legacy configuration options. The same coverage is provided by
existing PSA_WANT_... selects.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Application is expected to call usbd_uac2_send() on each enabled USB
Streaming Output Terminal (isochronous IN data endpoint) exactly once
every SOF. The class is bookkeeping queued transfers to make it easier
to determine component at fault when things go wrong. However, this
approach only works fine if the underlying USB device controller buffers
the data to be sent on next SOF and reports the transfer completion
immediately after data is buffered (e.g. nRF52 USBD).
While DWC2 otg also requires the SW to arm endpoint with data for the
next SOF, unlike nRF52 USBD the transfer is only considered complete
after either the IN token for isochronous endpoint is received or after
the Periodic Frame Interval elapses without IN token. This design
inevitably requires the application to be able to have at least two
buffers for isochronous IN endpoints.
Support dual buffering on IN data endpoints to facilitate sending
isochronous IN data on every SOF regardless of the underlying USB device
controller design.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Sleeping in sysworkq is a very bad idea, it can trash any hope of
realtimeness at best, deadlock the whole system at worse.
Add a check to input_report to downgrade the event to K_NO_WAIT
automatically when called from the sysworkq, similarly to what's done by
other APIs (netbuf and bluetooth), though only log if messages are
actually dropped.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Initializes the `net_idx` field of the ack context properly for KRP
functions in the Config Client.
This fixes a problem where `bt_mesh_cfg_cli_krp_get` and
`bt_mesh_cfg_cli_krp_set` would always fail the ack ctx comparison if
`key_net_idx` was != 0.
Signed-off-by: Ludvig Jordet <ludvig.jordet@nordicsemi.no>
When IPv4 address is added, currently the netmask remains empty. This
makes it impossible to use the address now that the netmask is
considered during address selection if the application does not
specify the netmask manually. Therefore specify a default netmask for
IPv4 addresses added to an interface with Kconfig.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Bit-wise comparing of the entire IPv4 addresses doesn't make much sense
as when selecting the source address for communication, what really
matters is the subnet part.
Doing so may actually lead to unexpected results, i. e. two addresses
within the same subnet should be considered equally good for
communication within the subnet, yet comparing the unique part of
the address (beyond the netmask) may lead to different results.
This is a problem for the mechanism of preferring the default interface
for LL communication if two interfaces have LL addresses with the
default subnet mask.
Fix this by filtering out the subnet from the IPv4 address before
passing it to net_if_ipv4_get_best_match() function.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently we blindly return the LL address found on the default
interface or else on the first interface that has a valid LL address
configured.
This doesn't work well, if different interfaces have LL addresses
configured with a different subnet mask. Therefore, instead of blindly
selecting the address based on the first LL address encountered, use
net_if_ipv4_get_best_match() function for LL addresses to find the best
match for the given interface.
The rework takes into account current behavior, i. e. default interface
still gets the preference if there is no better candidate.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
With recent changes the regulatory domain is handled via the hostap
rather than by passing and going through the driver and hostap doesn't
have any option for forcing the regulatory domain, so, add a note to
reflect that this is implementation dependent to cover both hostap as
well other offloaded implementations.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The dns_unpack_answer() did not check the length of the message
properly which can cause out of bounds read.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If the packet parsing fails in dns_unpack_response_query(), then
do not continue further but bail out early.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
As the error print strings are very similar, construct the final
output at runtime to save some flash space.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Follow net coding style and remove extra new lines between
variable set and checking its value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
We must do null check before trying to access the fields.
Fixes#81980
Coverify-CID: 434549
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Verify the result of the fs_read() operation when handling filesystem
resources, and abort processing the resource in case of errors.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Reset the server timestamps after bootstrap to handle a case
where a new server instance has replaced the bootstrap server
instance.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
In case lwm2m_get_engine_obj_field() fails to find a corresponding
object field when iterating resource instances, simply skip that
resource instance when printing object instance contents.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Support write OMA TLV resource instance in LwM2M 1.1.
Accept OMA TLV as default content format.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
The network interface name that is copied to if_req struct might
be missing terminating null for IPv4.
This is fixing the IPv4 issue which was missed in previous fix attempt.
Fixes#74795
Coverity-CID: 368797
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
