Add support for setting the sample frequency via `attr_set` and the
output data rate from device tree source.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
This commit explicitly type-casts data_bits to uint64_t
in order to fix implicit sign extension warning
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
Add RTIO async and RTIO stream functionalities that enables,
among all the other things, the sensor data streaming from FIFO.
RTIO stream is using both SENSOR_TRIG_FIFO_WATERMARK and
SENSOR_TRIG_FIFO_FULL triggers. The decoder currently only supports
following FIFO tags:
- LSM6DSV16X_XL_NC_TAG
- LSM6DSV16X_GY_NC_TAG
- LSM6DSV16X_TEMP_NC_TAG
Following FIFO parameters has to be defined in device tree to
correctly stream sensor data:
- fifo-watermark (defaults to 32)
- accel-fifo-batch-rate (defaults to LSM6DSV16X_DT_XL_NOT_BATCHED)
- gyro-fifo-batch-rate (defaults to LSM6DSV16X_DT_GY_NOT_BATCHED)
- temp-fifo-batch-rate (defaults to LSM6DSV16X_DT_TEMP_NOT_BATCHED)
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Updates the Kconfig condition to support trigger functionality for INA236.
This will get rid of `warning: INA230_TRIGGER (defined at
drivers/sensor/ti/ina23x/Kconfig:43) was assigned the value 'y' but got
the value 'n'.` if INA230_TRIGGER is enabled.
Signed-off-by: Tomáš Juřena <jurenatomas@gmail.com>
Fix for conversion of temperature values in adxl367_temp_convert
and missing break statement.
Signed-off-by: Vladislav Pejic <vladislav.pejic@orioninc.com>
Fix for SPI communication when RTIO is used in SPI driver. When in
adxl367_bus_access, const struct spi_buf buf[3] is used,
spi_rtio_copy function won't set correct buffers and length
for buf[2] and that will cause exception when that buffer is
processed.
Signed-off-by: Vladislav Pejic <vladislav.pejic@orioninc.com>
Add a timeout to the `bme280_wait_until_ready` loop to ensure that we
never get stuck in this loop even if the bus enters an error condition.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Updated ADXL367 driver with RTIO stream functionality.
RTIO stream is using both FIFO threshold and FIFO full triggers.
Together with RTIO stream, RTIO async read is also implemented.
Supported FIFO_CHANNEL configurations:
- XYZ
- X
- Y
- Z
- XYZT
- XT
- YT
- ZT
Configurations with external ADC are currently not supported.
Signed-off-by: Vladislav Pejic <vladislav.pejic@orioninc.com>
Add possibility to retrieve VBUS status of the nPM1300 charger through
its sensor APIs. Updated shields/npm1300_ek sample to use the new API.
Signed-off-by: Sergei Ovchinnikov <sergei.ovchinnikov@nordicsemi.no>
Links and the manufacturer name are updated from maxim to analog
for the 1-wire subsystem and the related ds18b20 sensor.
After the acquisition of Maxim Integrated the documentation
of these devices has been moved to the analog.com website.
Redirects exist, so they are not broken yet,
but we should not rely on that.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Update the measurement durations for the sht4x sensors
in accordance with the datasheet revision 6.6 (2024-04).
These timings have been updated by sensirion in rev 3 of
the datasheet.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
The function ina219_set_msr_delay always returns zero, indicating success.
Therefore, the error check on its return value is unnecessary and can be
removed.
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
`chan_type` is defined as a `uint16_t`. This makes checking if it is
< 0 always false. A warning is shown with -Wtype-limits. Remove the
check as it is unnecessary.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
The CONFIG_PINCTRL is removed from the board's defconfig files.
Drivers which use pin control function should add "select PINCTRL"
in their Kconfig files.
Fixes#78619
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
This Kconfig has wrongly been added to defconfig files. It is not the
right place for it. It has never been the right place for it. Drivers
that need it should select the symbol in their Kconfig entries. Drop
PINCTL from Kconfig.defconfig and add proper select at Kconfig.sam*.
Fixes#78619
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This is a bug fix for adxl345_accel_convert_q31 functions.
Functions are used to convert samples received from
sensor to q31_t format when RTIO stream is used.
Signed-off-by: Dimitrije Lilic <dimitrije.lilic@orioninc.com>
Sets the trigger thread name for all adi sensor drivers to more clearly
identify the thread when tracing or debugging.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
This is a bug fix for adxl372_accel_convert_q31 function.
Function is used to convert samples received from
sensor to q31_t format when RTIO stream is used.
Signed-off-by: Vladislav Pejic <vladislav.pejic@orioninc.com>
This is a bug fix for adxl362_temp_convert_q31 and
adxl362_accel_convert_q31 functions.
Functions are used to convert samples received from
sensor to q31_t format when RTIO stream is used.
Signed-off-by: Vladislav Pejic <vladislav.pejic@orioninc.com>
Before communicating with the device, the driver needs to wait 300ms. This
moves all communication with the device from init to configure, such
that this delay can be avoided on startup by using zephyr,lazy-load.
Signed-off-by: Tobias Pisani <mail@topisani.dev>
Remove Kconfig dependency on SOC_FAMILY_KINETIS as the temperature
sensor is available also on MCX family.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
The driver now does not wait for the completion of a measurement
in the submit function.
Instead it schedule the fetch and the completion of the
submission queue entry as delayed work to the system work queue.
Signed-off-by: Florian Weber <Florian.Weber@live.de>
The ILPS22QS is an ultra-compact piezoresistive absolute pressure sensor
which functions as a digital output barometer, supporting dual full-scale
up to user- selectable 4060 hPa. The device delivers ultra-low pressure
noise with very low power consumption and operates over an extended
temperature range from -40 °C to +105 °C.
(https://www.st.com/en/mems-and-sensors/ilps22qs.html)
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add a generic lps2xdf_config_int() API to configure device interrupt
mode, and implement the specific routines for lps22df and lps28dfw.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Move api_lps2xdf_handle_interrupt() API inside the CONFIG_LPS2XDF_TRIGGER
ifdef, because it should be defined only in that case.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Updated ADXL372 driver with RTIO stream functionality.
RTIO stream is using both FIFO threshold and FIFO full triggers.
Together with RTIO stream, RTIO async read is also implemented.
Signed-off-by: Vladislav Pejic <vladislav.pejic@orioninc.com>
Updated ADXL345 driver with RTIO stream functionality.
Added Trigger intterupt functionality. RTIO stream is using
FIFO threshold.Together with RTIO stream, RTIO async read
is also implemented.
Signed-off-by: Dimitrije Lilic <dimitrije.lilic@orioninc.com>
Add wsen_hids_2525020210002 driver with
the corrected name and compatibility with
the hal update as well as added new features.
Signed-off-by: Wajdi ELMuhtadi <wajdi.elmuhtadi@we-online.com>
Updated ADXL362 driver with RTIO stream functionality.
RTIO stream is using both FIFO threshold and FIFO full triggers.
Together with RTIO stream, RTIO async read is also implemented.
Signed-off-by: Vladislav Pejic <vladislav.pejic@orioninc.com>
Add support for Bosch bmp390 sensor, the drop in replacement for the
bmp388 with same register but different chip-id. This patch make use
of "bosch_bmp390" or "bosch_bmp388" and set the specific chip-id in a
data->chip-id variable, which then used to check against the register
value.
Additional, manual shift operation had been replaced with ENDIAN safe
macros and calibration values with target variable of int16_t add a
cast for it.
bmp388_spi: read register implementation wrong, fixed it.
tx-buffer must be <addr><dummy><dummy> in order to receive the
register value. Read registers in burst mode and have rx and tx
buffer same spi_buf to avoid clock stop and delay with nrf5.
Signed-off-by: Chris Ruehl <chris@gtsys.com.hk>
