Configures the accelerometer polling and trigger samples to disable the
uart console when the rtt console is enabled. Having both consoles
enabled simultaneously doesn't currently work on the apard32690 platform
and it's redundant anyway.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Adds adxl345 streaming and trigger configurations to accelerometer
samples for profiling the performance impact of adding rtio support to
max32 spi and adxl345 accelerometer drivers.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Changes the accelerometer polling sample to include data with the FIFO
watermark trigger instead of dropping it.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Add a new sample specifically for the SHT4X sensor.
Signed-off-by: Jakub Wasilewski <jwasilewski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
The nRF52840 Preview development kit is no longer available and the
text in the README.rst is changed to be "nRF52840 Development kit" and
the link to the documentation is changed to point to the production
version.
Signed-off-by: Ole Sæther <ole.saether@nordicsemi.no>
Delete the MAX44009 sensor sample as it's fully generic and does nothing
that's not already in light_polling sample.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add a disabled st,stm32-qdec node to TIM3 for STM32F2-based MCUs.
This enables QDEC support via devicetree overlays and simplifies
usage on boards such as nucleo_f207zg.
Signed-off-by: Amaan Singh <amaansingh160@gmail.com>
The name of the sensor in the title had one S too many, it should
be LPS22HH instead of LPSS22HH.
Same for the I3C version of the sample.
Signed-off-by: Josep Puigdemont <josep.puigdemont@gmail.com>
Add missing conf and power-domains for adafruit_feather_esp32s2
boards for the BME280 sample
Signed-off-by: Philipp Steiner <philipp.steiner1987@gmail.com>
The tmp116 sensor driver also supports tmp117 and tmp119. Therefore rename
to indicate that is supports a range of tmp devices.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Moved the grove light sensor into a generic light sensor sample.
Replaced board specific node name for light sensor with an alias.
Refactored project name to reflect generic light sensor.
Signed-off-by: Dipak Shetty <shetty.dipak@gmx.com>
Add an example of how to initialize gbias. The real application should
restore latest valid values taken from non-volatile memory.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Moves the MPU6050 accel/gyro scale settings from KConfig to Devicetree.
Adds a new setting for the MPU6050 sample rate divider register and
transmits it to the sensor upon initialization.
This helps to reduce the interrupt firing rate when combined with the
data ready trigger.
A default division factor is provided which ensures compatibility with
existing applications.
The MPU6050 sample application is extended and used for hardware tests.
Signed-off-by: Tilmann Unte <unte@es-augsburg.de>
Adds zephyr:board and zephyr:board-supported-hw directives to the
Arduino docs in order to generate more of the boards' documentation
automatically.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
- Test all attribute combinations of Vishay sensor VEML6031 which is an
ambient light sensor.
- Print out saturation case of sensor.
- Idea is to be able to find a good combination of attributes for an
optimal working area.
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Rename the driver from uart_native_posix to uart_native_pty.
Including renaming the DTS compatible, and kconfig options, deprecating
the old ones.
And refactor the driver, generalizing it, so we can have any number of
instances.
Note that, unfortunately generalizing to N instances cannot be done
without a degree of backwards compatibility breakage: This driver was
born with all its configuration and selection of the instances based on
kconfig.
When the driver was made to use DT, it was done in a way that required
both DT and kconfig needing to manually coherently enable the 2nd UART.
This has now been fixed, which it means only DT is used to decide how
many instances are avaliable, and UART_NATIVE_POSIX_PORT_1_ENABLE is
just ignored.
Including:
* Deprecate UART_NATIVE_WAIT_PTS_READY_ENABLE: the options is always on
now as it has no practical drawbacks.
* Deprecate UART_NATIVE_POSIX_PORT_1_ENABLE: DTS intanciation defines it
being available now.
* Rename a few functions and in general shorten pseudo-tty/pseudo-
terminal to PTY instead of PTTY.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add sensortile_box_pro board overlay and config files.
This is good to verify lsm6dsv16x RTIO streaming over SPI bus.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Pinoroni Pico Plus2 is an RP2350B based board that has
more rich I/O, RAM, and Flash than the original Raspberry Pi Pico2.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
No reason for this sample to be build_only, it can run and be verified
just fine on the right platforms.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
sample.sensor.accel_trig.shield-tap has a DT overlay that expects the
presence of an arduino_header, so add the appropriate dependency to only
build the sample against supported boards.
As per samples guidelines, use platform_allow to limit CI to run only on
a configuration that's actually been tested (and is documented in the
README)
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add the overlay file for the i.MX RT1064 EVK board.
The sample can be run on the i.MX RT1064 EVK board out of the box.
Signed-off-by: Simone Orru <simone.orru@secomind.com>
Add twister tests for tap detection feature
The overlay must be applied only if the shield x_nucleo_iks01a3
is enabled on board nrf52dk/nrf52832.
Signed-off-by: Pierrick Curt <pierrickcurt@gmail.com>
Using an app.overlay file is inherently preventing the use of board
overlays. Switch to a dedicated overlay file so that e.g.
the vmu_rt1170/mimxrt1176/cm7 board target can pass this test where
before it would have failed due to its board-specific overlay "winning"
over the app.overlay file.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
