During stress test with WiFi connect, disconnect, ping and throughput
traffic, ARP table updating failed issue may occur.
In arp_prepare(), if packet allocate failed, should add the arp
entry back to arp_free_entries, to avoid this entry is leak forever.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Convert various networking subsystem files to use ARRAY_FOR_EACH
macro to make the looping more robust.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The netmask should be tied to the IPv4 address instead of being
global for the network interface.
If there is only one IPv4 address specified to the network interface,
nothing changes from user point of view. But if there are more than
one IPv4 address / network interface, the netmask must be specified
to each address separately.
This means that net_if_ipv4_get_netmask() and net_if_ipv4_set_netmask()
functions should not be used as they only work reliably if there is
only one IPv4 address in the network interface.
The new net_if_ipv4_get_netmask_by_addr() and
net_if_ipv4_set_netmask_by_addr() functions should be used as they make
sure that the netmask is tied to correct IPv4 address in the network
interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This ensures that the configured link address is
at least as big as the part of it that is used.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Since PR, PR_SHELL, PR_ERROR, PR_INFO, and PR_WARNING already have
an embedded `sh` NULL check, we can remove the change from PR #68809.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This change reduces the memory footprint by changing the data type of
`valid_5g_chans_20mhz` from `uint16_t` to `uint8_t`.
Additionally, since the maximum channel number for 5GHz Wi-Fi is 177,
it can fit within the `uint8_t` range.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This flag indicates that only passive transmissions are allowed in that
channel for that regulatory domain.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Fix the dead lock between rx_q and tx_q thread.
When tx_q thread prepares to send ARP packet, it might get
the net_if_tx_lock in net_if_tx(), then in net_arp_prepare(),
it will try to get the arp_mutex.
At the same time, if the rx_q thread receives an ARP reply
packet, in arp_update(), it will get the arp_mutex first,
and flush the packets in arp pending_queue and try to get
the net_if_tx_lock. Then the dead lock occurs, two threads
stuck and all the packcets can't be freed.
In arp_update(), taking the net_if_tx_lock first then taking
the arp_mutex can fix this issue.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
By default variable context.sh is set to NULL. If any net_mgmt
event will be called when the variable has default value, there
will be a system exception.
Signed-off-by: Wojciech Slenska <wsl@trackunit.com>
WIFI scan result shows junk character in SSID because of
the length of ssid is maximum(32 character) which leads
to buffer overflow. It required one character for null
terminator ‘\0’.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
As defined in IEEE802.1AS-2020 ch. 10.2.12.2.1, the port identity
of an MDSyncSend structure sent from a port shall be set to the
port identity of the sending port according to and ch. 8.5.2.
This commit replaces the port identity before forwarding a sync.
Fixes#68385
Signed-off-by: Manuel Schappacher <manuel.schappacher@hs-offenburg.de>
Additionally, replace the local print(sh, level, fmt, ...) macros
with PR, PR_ERROR, and PR_WARNING macros.
Then remove the print(sh, level, fmt, ...) macros.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Replaced direct shell_fprintf calls with PR, PR_ERROR, PR_INFO
and PR_WARNING macros.
This change simplifies the code by using predefined macros.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Moved 'scan_result' from a standalone variable into the 'context' struct
to enhance code optimization.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This commit introduces a local variable 'sh' to store 'context.sh' for
use with the 'shell_fprintf' function.
By doing so, we avoid the repeated dereferencing of 'context.sh',
thereby reducing the code footprint.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
For a Wi-Fi station the connect API supports both band and channel
configuration, but for a shell command either channel or band makes
sense, so, overload the channel field to support band.
Rejig the band and channel validation to support all modes.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Make sure that scan band string is properly terminated when
parsing user supplied string.
Fixes: #67944
Coverity-CID: 342930
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add command to query to WiFi driver/firmware revision. The API is expected
to return the firmware revision and driver version as a string, and can be
used by the user to determine what revision of the WiFi driver is in use.
Signed-off-by: Sandip Dalvi <sandip.dalvi@nxp.com>
Now that we are using the shell macro to enforce argument count check,
both mandatory and optional arguments, these additions checks are
unnecessary.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Remove TX-Injection and Promiscuous mode setting from Wi-Fi mode shell
command. These commands are being moved to ethernet l2 layer
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
This set of changes brings in raw packet tx injection mode
feature to ethernet and removes it from being a Wi-Fi only feature.
It was earlier envisaged as Wi-Fi net management feature only.
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
So that it's possible to register ARP entries manually. Needed for DHCP
server implementation, which in unicast mode needs to reply to an IP
address that is not registered on the peer interface yet (hence no ARP
reply will be sent). It's needed to add an ARP entry manually in that
case, as hardware address is already known at that point.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
L2 PPP is not able to handle the carrier being lost gracefully,
nor is it able to gracefully close the PPP connection when
net_if_down() is called.
This patch refactors the L2 PPP module to use the carrier state
to either properly close or simply terminate the PPP connection.
Additionally, it ensures that the PPP session is closed properly
before calling ppp->stop().
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
The channel extraction from string directly uses the end variable with
limited data type, this causes issue if an invalid channel that exceeds
the data is given as an input e.g., 300, which would end up as a valid
channel 44.
Use an intermediate variable with type that can hold all possible
combinations (valid and invalid) and only after validation assign that
to the end type.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
For none and WPA-PSK MFP isn't applicable, it was only introduced in
WPA2-PSK (RSN) and later.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
A problem occurred while running PTP on a multi-port target
(RENESAS RZT2M) with two ports enabled. Announce messages on the
switched devices master port always contained local clock information
instead information from received on the slave port from the better
GM clock. Depending on the BMCA config this turned into having more
than one GM in the system.
Sending always the locally stored GM information helped to overcome
this issue.
Signed-off-by: Manuel Schappacher <manuel.schappacher@hs-offenburg.de>
Provision of configurable parameter for generating unblock event
ahead of TWT slot. Host application depending upon latencies can
configure this to wakeup rpu ahead of the TWT slot.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
ARM GCC version 12.2.0 (Zephyr SDK 0.16.4) generates the following build
warning from the strncpy call in "wifi_utils_parse_scan_bands":
warning: '__builtin_strncpy' output truncated before terminating nul
copying as many bytes from a string as its length
To resolve this warning, pass the maximum length of the temporary
parse_str buffer to strncpy. This also has the benefit of correctly null
terminating parse_str, since we already verify the
scan_bands_str is properly null terminated with the strlen() check in
this function. We can therefore remove the line adding a null terminator
to parse_str as well.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This was missed in earlier that tried to fix all string comparisons to
use case insensitive comparison.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
In AP mode maintain the database of connected stations based on the
Wi-Fi management events and dump the list.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
These are helpful to track clients being added and deleted.
Applications can actions based on these events.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
These events communicate the status of AP mode operations (enable or
disable) with few pre-defined enumerations.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
