BT_CTLR_ISOAL_LOG_DBG_VERBOSE, BT_CTLR_ISO_TX_SEG_PLAYLOAD_MIN, and
BT_CTLR_CONN_ISO_AVOID_SEGMENTATION are very tied to the BT_LL_SW_SPLIT
implementation. It is very unlikely that these will ever be used by
another controller
Therefore move them out to the BT_LL_SW_SPLIT specific configuration
file. This will likely create less confusion when using another
controller.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
When the legacy LLCP implementation was removed this Kconfig option was
mistakenly left over. Remove it now with all its users.
Fixes#63212.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Kconfig option to turn off ISO Data Packet Sequence Number
use to place the ISO Data in the correct radio event,
instead simply buffer it to next radio event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add BT_CTLR_EVENT_OVERHEAD_RESERVE_MAX Kconfig to allow the
omit of EVENT_OVERHEAD_START_US and EVENT_OVERHEAD_END_US in
the time reservation calculations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Switch use of kconfig:
* SOC_SERIES_NRF53X -> SOC_COPATIBLE_NRF53X
* SOC_NRF5340_CPUNET -> SOC_COMPATIBLE_NRF5340_CPUNET
to also select those options/code when building for
the nrf53 simulated targets.
Also switch three kconfig range dependencies from
SOC_SERIES_NRF52X to SOC_COPATIBLE_NRF52X
(IRQ priority related) for consistency. These sound
not really have an impact.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Maximize BIG event length to extend upto ISO interval, and
allow PTO and Control subevents to be pre-emptible.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ticker implementation to prefer to keep ticker node
started in case of race condition to start and stop.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing lazy calculation when using ticker interface
required for Central CIS create.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adds a target RPA known unknown cache; it fulfills a similar function
to the existing peer RPA cache, used for scanning of directed
advertisements
Signed-off-by: Troels Nilsson <trnn@demant.com>
These configs are very tied to the BT_LL_SW_SPLIT implementation,
so it makes sense that these are only visible when that link layer is
used.
For the ones that may be used by other controllers in the future,
a dependency has been added.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Add LL_ASSERT_OVERHEAD define to reuse the assertion check
related to increase in actual EVENT_OVERHEAD_START_US value.
Introduce Kconfig option to permit radio event be skipped
when increased prepare callback latencies are measured,
instead of assertion.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move BT_CTLR_SCAN_SYNC_ISO_SET to Kconfig from Kconfig.ll_sw_split
This means it can be used by other controllers and alligns with location
of other iso configs - e.g. BT_CTLR_SYNC_ISO_STREAM_COUNT
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
Introduce a Kconfig BT_CTLR_ISOAL_SN_STRICT to relax the Tx
ISO Data SDUs being dropped due to strict check of sequence
numbers in ISOAL, i.e. dropped when ISO Data SDUs are
delayed from upper layer with respect to the current
payload number in the ISO radio events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The BT_CTLR_DF_SUPPORTED KConfig was a wrapper for DF related features
set that are supported by Zephyr's BLE Controller. At the same time the
KConfig is used by Host in compound build to enable BT_DF. That makes
the whole thing a bit coupled with Zephyr's controller.
External implementations of controller must provide same feature set
as Zephyr's Controller or there will be an error during build.
The PR moves the Zephyr's Controller DF supported features set to
Kconfig.ll_sw_split, where it is included only when BT_LL_SW_SPLIT
is selected. BT_CTLR_DF_SUPPORTED is now a top DF_SUPPORTED KConfig
option that enables possibility to select actual DF features.
That allows to select individual set of DF features by any controller
implementation and makes possible to enable BT_DF and build selected
DF Host features.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Use the ticker_start_us() interface for Central and Central
ISO setup to acheive fine timing for the first expire
timeout.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
To acheive microsecond or fine timing for first expire
timeout, pass remainder value of the coarse tick to a new
ticker_start_us() interface. The new interface is available
with BT_TICKER_EXT feature enabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Ticker remainder and lazy get depends on match get interface
provided by BT_TICKER_NEXT_SLOT_GET_MATCH.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove redundant range and default for BT_CTLR_ADV_AUX_SET
when supporting BT_CTLR_ADV_PERIODIC.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
BT_TICKER_EXT is not supported with BT_TICKER_LOW_LAT.
Remove redundant select of BT_TICKER_EXT for
BT_CTLR_ADV_EXT.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update Advanced Scheduling implementation to use remainder
value in precisely calculating the connection request window
offset in microseconds.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated the 3 places in extended advertising where the ticker was
previously inquired about the expiration of another ticker ID in a
separate mayfly (adv_aux, adv_sync and adv_iso). It will now use the
new ticker feature where another ticker IDs expiration info will be
added to the callback.
Channel map updates are now handled in ticker_cb and applied immediately
if the ticker is not running
Signed-off-by: Troels Nilsson <trnn@demant.com>
The slot reservation code is only valid for the refactored LLCP;
a guard was in place to ensure that it was not compiled in for
legacy controller code. This commit removes this guard
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
This commit removes the legacy LLCP code including the
Kconfig option
It also updates the babblesim tests, and removes the
tests for the legacy controller
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
To enable Bluetooth controller coexistence feature, there is
implementation of ticker task, which aborts any ongoing radio events
during assertion of the grant pin. This solves the co-existence issue
in the role of the subordinate transceiver.
Signed-off-by: Tomáš Beneš <tomas@dronetag.cz>
Fix AUX_ADV_IND AUX_SYNC_IND radio utilization by having a
configurable offset.
Define an offset between AUX_ADV_IND and AUX_SYNC_IND when
using Advertising Interval for the Extended Advertising and
Periodic Advertising that are same or multiple of each
other, respectively.
Note, to get advertising intervals that are same or
multiple, the Periodic Advertising Interval shall be 10
millisecond more than the Extended Advertising Interval;
this is because the AUX_ADV_IND PDUs are scheduled as
periodic events of Extended Advertising Interval plus 10
milliseconds (Advertising Random Delay) as the periodic
interval.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix CIG offset such that it follows after the ACL connection
time reservation to avoid overlapping.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update Kconfig to list Central and Peripheral ISO as
supported. Will continue to be listed as Experimental.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use the maximum data PDU size time reservation space
considering the Data length could be updated from default
27 bytes to maximum support size.
If maximum time reservation is disabled then time space
reservation corresponding to the default data length at the
time of the start/enable of Central role is used.
Note, currently this value is only used to space multiple central
connections and not for actual ticker time reservations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Since the event length update is not necessarily an improvement
in all situations a Kconfig option is added so that it can
be disabled for the users that do not need it.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Fix compile error building application with
BT_LL_SW_LLCP_LEGACY. Request Peer SCA command is not
supported in legacy control procedure implementation.
Relates to commit 76439d0ba4 ("Bluetooth: controller:
integrating SCA procedure and adding HCI API").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The default number of buffers (contexts) for locally initiated
procedures was 4. Per default the host initiates 3 procedures
when opening a connection, allowing the application to initiate
only 1 additional procedure in parallel.
This commit increases the default to 6, if auto phy-update and
dle is enabled, increasing the robustness for an application.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Replace the BT_CTLR_ADVANCED_SCHEDULING_CENTRAL_CONN_SPACING
Kconfig with BT_CTLR_CENTRAL_SPACING to configure the
the spacing from the beginning of a central connection event
to beginning of the next central connection when supporting
multiple simulataneous central connections.
If the BT_CTLR_CENTRAL_SPACING in microseconds is smaller
then the required time reservation for a connection event,
for given maximum data length and PHY in use, then the
calculated time reservation will be used as the spacing
between consecution central connection events.
The change fixes an issue wherein use of old Kconfig with
higher values causes new central connections to be placed
in between already connected central role if there was
free time space available to fit the new connections time
reservation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adding support for allowing user extension code to support deferring
anchor point moves. Refactored LLCP only.
Note: This is NOT supported by LEGACY LLCP impl.
KConfig'd by BT_CTLR_USER_CPR_ANCHOR_POINT_MOVE
Modified ll_conn_update API, to accommodate passing offsets
Modified CPR/CU context data structure
Modified CPR/CU procedure to handle anchor point move wait state
Fixed up unit tests, adding anchor point move cases to CPR/CU test
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Conditional compile ticker interfaces like ticker_update
which are not required when individual state or role samples
are build.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable ticker ticks slow window extensions implementation
when broadcaster role is enabled. This feature moves the
primary channel advertising event within the specified
window when overlapping with other roles.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add in Kconfig, select DEPRECATED, to warn at build time
that the LLCP legacy implementation is deprecated and the
refactored LLCP enabled by BT_LL_SW_LLCP Kconfig option be
used instead (which is the default now).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enforce next_is_older only when current has equal force as
with the next ticker.
Added Kconfig to disable priority feature in ticker that is
currently not used by Zephyr Bluetooth Low Energy
Controller.
The priority feature if enabled then a custom ULL is needed
by vendors to avoid repeated skipping of overlapping events
as next_has_priority check uses lazy value that would be
always lazy_next > lazy_current as currently skipped event
becomes the next event with lazy value incremented by 1.
Regression in commit 3a9173afe1 ("bluetooth: controller:
Revised ticker for improved conflict resolution") due to
Zephyr Controller does not implement any vendor specific
priority logic.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a Kconfig for Advertising Data Chaining in Extended and
Periodic Advertising, permitting AD data lengths of upto
1650 bytes. The implementation is experimental and needs
further testing.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add Kconfig to use minimal time reservation for auxiliary
and sync PDU reception. A peer device could be scheduling
multiple advertising sets in a short duration with small
PDUs hence using the minimal time reservation would avoid
skipping closely scheduled reception of multiple auxiliary
PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When AUX_ADV_IND or AUX_CHAIN_IND auxiliary channel PDU scan
radio event overlaps Periodic Sync radio event in unreserved
time space, let the Periodic Sync radio event be aborted so
that the auxiliary channel PDU can be received to generate
Extended Advertising Reports. Added a new Kconfig to enable
this.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When AD data length of greater than 191 bytes support is
enabled then default to using the back-to-back PDU chaining
feature in the Controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Setting the new LLCP as default exposed errors in CI tests, which
are fixed here
Note that advanced scheduling needs to be disabled. Work is in
progress for implementing this for the new LLCP
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
