Change logging level definitions to just numbers instead of
numbers with unsigned indicator (e.g. 1 instead of 1U). Levels
from Kconfig comes as just numbers and often levels are used
for IS_ENABLED-type of macros where values are concatenated
into tokens and it actually makes the difference if value is
1 or 1U. It allows minor cleanup in the internal macros.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Removes extraneous word in note on net_context struct describing why the
source address is not stored directly in struct.
Signed-off-by: Daniel Mangum <georgedanielmangum@gmail.com>
Reduce the valid scaling range for the gain multipliers and dividers to
provide more headroom on int64_t overflows in the calculations. Take
advantage of this headroom to perform all multiplications before
divisions.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Change the unit of the sense resistor in the devicetree binding from
micro-ohms to milli-ohms. This is done for three reasons.
Firstly, the maximum value resistor that can currently be represented
is 4.2 kOhms, due to the limitation of devicetree properties to 32 bits.
Secondly, storing the resistance at such a high resolution makes
overflows much more likely when the desired output unit is micro-amps,
not milli-amps.
Finally, micro-ohms, are an unnecessarily precise unit for the purpose
of these calculations, and a resolution that is not realistic to
achieve. The high resistor resolution results in large divisors that
reduce the resolution of outputs. Unlike resistors characterised down to
the micro-ohm, devices wanting to measure micro-amps are actually
realistic.
Signed-off-by: Jordan Yates <jordan@embeint.com>
If the Broadcast ID is initially set to 0x000000,
which is valid, comparison logic on add of an
actual Broadcast ID of 0x000000 fails.
Likewise for SID.
Moving INVALID_BROADCAST_ID define to bap.h
Signed-off-by: Lars Knudsen <LAKD@demant.com>
Make clear in the include/ header that data frame size
is the same thing as word size for the context of this API.
Also, add some comments to the spi_context to make it easier
for driver writers to understand how to use the functions,
by noting the meaning of the dfs and len parameters to the update
functions. Otherwise it takes some time to understand what they mean.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The "struct video_driver_api" struct field "get_ctrl" had the wrong type
although this did not have any practical effect as "video_api_set_ctrl_t"
and "video_api_get_ctrl_t" have the same signature.
Signed-off-by: Josuah Demangeon <me@josuah.net>
CONFIG_ZVFS_POLL_MAX is now used to control the maximum number of poll()
entires. Thereby, CONFIG_NET_SOCKETS_POLL_MAX is redundant and shall
be deprecated.
Modify the defaults for NET_SOCKETS_POLL_MAX and ZVS_POLL_MAX so that
the deprecation actually makes sense instead of symbol removal. In case
the application still sets the old config, it will modify the
ZVS_POLL_MAX default.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Currently Zephyr depends on POSIX, which presents a
dependency cycle.
Newlib does not seem to like this dependency cycle so it
requires that we re-declare off_t and ssize_t.
We should really stop using off_t and ssize_t below the
POSIX API line in Zephyr.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Move the implementation of zsock_select() to zvfs_select(). This
allows other types of file descriptors to also make use of
select() functionality even when the network subsystem is not
enabled.
Additionally, it partially removes a dependency cycle between
posix and networking by moving functionality into a mutual
dependency.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Move the implementation of zsock_poll to zvfs_poll. This allows
other types of file descriptors to also make use of poll()
functionality even when the network subsystem is not enabled.
Additionally, it partially removes a dependency cycle between
posix and networking by moving functionality into a mutual
dependency.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Add common video interface binding. This binding contains the most
common properties needed to configure an endpoint subnode for data
exchange with other device.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
bindesc.h did not explicitly include device.h. For some build scenarios
this caused compilation warnings, failing the CI.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
This commit adds support for reading and parsing binary descriptors.
It can be used for reading the descriptors of another image, or for
iterating over one's own descriptors.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Add a Kconfig symbol to limit the maximum size of a descriptor's
data, enforced by a build assertion.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Supported memory attribute for device for Cortex-M.
Not sure why such code was conditional compile for only Cortex-R,
but Cortex-M also suited.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
What is changed?
1. Updated the data sync barrier to make sure the other parameters of
`arm_cpu_boot_params` are updated before updating its member `mpidr`
2. Updated the MPIDR affinity level mask to account for affinity level
1 and 2 along with level 0.
Why do we need this change?
1. As reported in issue #76182, on Cortex_A_R, the current code
execution fails to consider the correct sequence of data sync
barrier and cache maintenece for the code to work on non cache
coherent cores in SMP enabled mode.
The secondary cores are waiting in a loop for primary core to set
`arm_cpu_boot_params.mpidr`. As soon as primary core set this,
the secondary cores start reading other parameters from the
`arm_cpu_boot_params` however, the existing position of DSB
instruction doesn't guarantee that `arg`, `cpu_num` and other
parameters of `arm_cpu_boot_params` would be updated before `mpidr`
is udpated and this could lead to a unpredicatble behaviour so,
we need to move the DSB instruction.
2. The affinity level mask is updated because it didn't account for
level 1 to identify individual cores within a cluster and
level 2 to identify different clusters within the system which can
lead to an incorrect conversion between mpidr to core-id.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
Remove the unnecessary video-controls header included in video.h.
Drivers, applications should explicitly include it when needed.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
The ENTDAA does not have a way to assign DA that are with a PID. It will
assign DAs that were in it's RRs in the order that they win arbitration.
Assign only available addresses in to it's RRs before ENTDAA.
Cleanup the attach api to no longer require a addr argument and remove
the helper function `i3c_determine_default_addr`. This now looks at if
it has a static address or if it already has a dynamic address (such as
from DEFTGTS) and will register the address if either exist with
precidence of dynamic addr over static addr.
This also fixes up the look up for if a device already has a dynamic
addr to find which pos of the RRs is it is in.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
Fix build error in DPP struct when building Matter over Wi-Fi.
The struct declaration must be done outside of the anonymous union.
Only struct definition can be done inside the anonymous union.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Add optional statistics around the channel publishing action. Store the
time a channel was last published to, and a total publish count.
This information can be used to determine how old a given channels data
is, and an average channel publishing frequency.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Color bar is one type of test patterns. Rename it to
VIDEO_CID_CAMERA_TEST_PATTERN to be more generic.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Add some control IDs:
- VIDEO_CID_CAMERA_HUE
- VIDEO_CID_POWER_LINE_FREQUENCY
- VIDEO_CID_PIXEL_RATE which is needed for changing frame rate
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Add scan cb to scan delegator so that Application
can be notified when assistant starts or stops
scanning.
Also state information of Broadcast Assistant
is removed as info is not used.
Signed-off-by: Nithin Ramesh Myliattil <niym@demant.com>
Move log_output_flush and log_output_write (renamed internal
buffer_write() function) to the header as inline functions.
Those function are used by log_output_dict.c and there are cases
when log_output.c is not compiled in.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
IPv6 based interface lookups doesn't require native IP stack support,
hence reflect that in the API.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
seperate the autohandler from the main
hawkbit source. This way the autohandler can
be disabled if it is not needed.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Add function to get the poll interval.
This is needed to seperate the autohandler
from the main hawkbit code.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Remove the `work_q` parameter from `NET_SOCKET_SERVICE_SYNC_DEFINE` and
`NET_SOCKET_SERVICE_SYNC_DEFINE_STATIC` as this feature was dropped
during review but the removal was not 100% complete.
Signed-off-by: Jordan Yates <jordan@embeint.com>
This commit introduces the `crc8_rohc` function to the CRC library,
implementing the CRC-8/ROHC (RObust Header Compression) variant.
This algorithm is widely used in networking protocols, which is commonly
found in modem subsystems.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
