MAX32662EVKIT board has CFAF128128B1-0145T display which
is 128x128 graphic display.
This commit enable mpi dbi display support with LVGL graphic library.
Pin connection of display is 3wire mode
SRAM size increased to be fit with lvgl example.
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Add the dts and config overlay for the two boards in order
to have the openamp_rsc_table sample working on
HiFi4 DSP from i.MX8QM and i.MX8QXP.
Since these two are similar, use a snippet.
Therefore, to compile the sample we use:
west build -p -b imx8qm_mek/mimx8qm6/adsp -S nxp-openamp-imx8-adsp
-s samples/subsys/ipc/openamp_rsc_table/
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
A virtual metal_device is created, next the needed IO regions are created
and added to this device. Immediately we extract these regions back out
and make use of them. There is no reason to create the metal_device and
add the IO regions to it, instead simply use the IO regions directly.
This is similar to what was already done to the openamp_rsc_table sample.
Signed-off-by: Andrew Davis <afd@ti.com>
This is in preparation for adding another SoC where qemu_xtensa
is no longer valid choice. So use qemu_xtensa/dc233c as it is
the same as the old qemu_xtensa.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds custom overlay and config allowing the fs_sample to run on
the stm32f746g_disco with DMA enabled.
Signed-off-by: Maciej Sobkowski <msobkowski@antmicro.com>
Adds NXP platforms to the smp_svr sample allow list,
for overlay-serial.conf and overlay-shell.conf.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Align all existing samples/tests/applications which
contains nrf54l15pdk/nrf54l15/* by adding
nrf54l15dk/nrf54l15/* to enable twister builds.
Signed-off-by: Katarzyna Giądła <katarzyna.giadla@nordicsemi.no>
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix does not
improve coverage for the sample or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated. Let's switch the filter and build
checks to native_sim instead.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix does not
improve coverage for the sample or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix does not
improve coverage for the sample or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix does not
improve coverage for the sample or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix does not
improve coverage for the sample or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix does not
improve coverage for the sample or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Used the SMP_BT_SVC_UUID_VAL define exposed in the smp_bt header
in the smp_svr sample instead of hardcoding its value.
Signed-off-by: Mateusz Kapala <mateusz.kapala@nordicsemi.no>
This commit uses the new .. zephyr:code-sample-category directive to
categorize code samples across the tree.
Updates existing legacy references to manually defined targets to now
use :zephyr:code-sample-category: role instead.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Was getting compilation error due to `CONFIG_SHELL_CMD_ROOT`
not being defined whe building the sample under certain
configurations.
The `CONFIG_SHELL_CMD_ROOT` is defined and used only when
`CONFIG_SHELL_START_OBSCURED` is enabled, we can simply move
it to another file and rely on CMakeLists.txt to compile.
Run the `login_init` with `SYS_INIT` so that the `main()`
do not need to have knowledge of its existence.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Added new Kconfigs for defining permission level of GATT
characteristics that are part of the Bluetooth SMP service in the
MCUmgr subsys.
Removed the CONFIG_MCUMGR_TRANSPORT_BT_AUTHEN as the new Kconfig
options are mutually exclusive and need to be groupa as the Kconfig
choice option.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Commit 911abc33e6 did move the samples
from subsys/ to drivers/, and more contribution came in parallel.
This covers extra board configurations added later which also need
moving.
Signed-off-by: Josuah Demangeon <me@josuah.net>
Adds missing code-sample directive to the Hello World sample in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fixes bad usage of single backticks in lieu of double backticks for
rendering inline literals, or simple '*' for italics.
When appropriate, a better construct than double backticks has been
selected (ex. :file:, :kconfig:option:, :c:func:, ...), or proper :ref:
have been used if the original intention was to have a link.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add kernel reboot support, so can use shell to verify reboot function.
uart:~$ kernel reboot cold
Known issue is imx93 currently can only support cold reboot and doen't
support warm reboot.
Updated board document.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Add testcases for ICBMSG on nRF54L15 with only one endpoint,
including non-multithreading case.
Signed-off-by: Magdalena Pastula <magdalena.pastula@nordicsemi.no>
This sample demonstrates how demand paging can be leveraged to deal with
firmware bigger than the available RAM if XIP is not possible. Select
code can be tagged to be loaded into memory on demand, and also be
automatically evicted for more code to be executed when memory is
exhausted.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The samples were written when UAC2 class supported only full-speed and
it was not clear how the high-speed would be supported.
Add the full-speed property so the samples can work with updated UAC2
implementation.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
As there is no check (yet!) in the directive, many
.. zephyr-app-commands:: in the documentation are pointing to
non-existing sample applications, which is problematic for users who
typically expect to just copy-paste the commands and have them work.
This commit fixes all offending references to point to existing samples,
or converts them to simple ":app:" instead of ":zephyr-app:" when the
intent wasn't to refer to in-tree samples.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Use generic hook infrastrucutre instead of custom Kconfig and hooks for
ARM.
Replace z_arm_platform_init() with platform_reset().
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move the network buffer header file from zephyr/net/buf.h to
zephyr/net_buf.h as the implementation now lives outside of the networking
subsystem.
Add (deprecated) zephyr/net/buf.h header to maintain compatibility with old
file path.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Adds missing code-sample directive to the remaining samples in
`samples/subsys` that didn't use it yet in preparation for upcoming
changes to the Zephyr documentation that will be leveraging the provided
description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Modify USBD_DEFINE_MSC_LUN() to take in separate id by which the LUNs
are sorted. Previously the disk name itself was implicitly used as a
sorting key. This is a breaking change to Experimental API.
Another advantage of splitting the sorting id from disk name is the
ability to use KConfig symbols as disk name. Currently the MMC disk
driver uses KConfig symbol CONFIG_MMC_VOLUME_NAME.
Mark LUN definitions as static const because the LUNs are ending up in
ITERABLE_SECTION_ROM().
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Replace LL_EXTENSION_SYMBOL() with EXPORT_SYMBOL() in all tests and
samples.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
This commit changes the default value of CONFIG_HELLO_WORLD_MODE to 'y'
so that the hello_world function is compiled as a built-in part of the
Zephyr image by default. This is the simplest possible configuration,
that works for all architectures.
To build hello_world as an llext module, the user must either follow the
commands in the documentation or set CONFIG_HELLO_WORLD_MODE=m in the
project file along with additional architecture-specific settings that
may be required for proper LLEXT support on the target.
Leave a note in the prj.conf and sample.yaml files to remind the user.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The sample illustates how to achieve bidirectional asynchronous audio.
Implicit feedback is the only way to achieve asynchronous USB headset
on devices that have only one isochronous IN and one isochronous OUT
endpoint.
The sample implements stereo playback and mono recording. While it would
be possible to have stereo recording, the commonly available headsets
are mono only. The number of channels can differ between audio sink and
source because the only requirement is that the two run on same clock.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
