Using a separate workqueue causes issues without any special locking to
synchronize with networking threads e.g., interface being removed while
the workqueue is trying to synchronize with WPA supplicant.
It's easier to use the net_mgmt thread which is in better sync with
networking.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
In case of error conditions post successfully sending the message, the
event is already freed but we attempt to free it again.
Rejig the labels to easily reflect thier purpose.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
When an event is sent the receiver gets is asynchronously and hence is
responsible for free the event, the sender should only free in case of
error conditions i.e., unable to send.
Else, this causes a tough to debug double-free.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
In case WPA supplicant disabled DPP, we need to compile out the
corresponding DPP code in Wi-Fi shell too.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The security check case statements were in frequency band
setting checks. This is totally wrong and will cause compiler
warnings. Moving the checks to correct function.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
For add_interface(), only add STA interface when hostapd enabled,
and the Soft-AP interface will be added in zephyr_hostapd_init().
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
When we have coexistence of hostapd and wpa_supplicant,
wpa_msg has different implementation.
So to let them work together, we need to have common implementation
for wpa_msg and dispatch msgs for hostapd and wpa_supplicant.
So add register zephyr_hostap_ctrl_iface_msg_cb,
and judge if ctx is hostapd by the first integer where ctx points to.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Hostapd has TODO in hostapd_dpp_handle_config_obj,
to save DPP connector using wpa_msg.
AP DPP needs to use dpp_connector, dpp_netaccesskey and dpp_csign
in DPP Peer Discovery handshake in hostapd_dpp_rx_peer_disc_req.
So add AP DPP wpa_msg event handler to store these info.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Add hostapd mgmt ops, some use same api as wpa_supplicant,
and DPP use different ops.
supplicant_dpp_dispatch use wpa_cli and hapd_dpp_dispatch use hostapd_cli.
And use common DPP param parse.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Add null termination of ssid and psk. If user pass ssid,
psk without null terminator it will add by default.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
The default Max A-MPDU length is 8191 shown in the VHT Cap Info from
SAP's beacon/Assoc response, and this length is read from
hapd->iface->conf->vht_capab. It will lead to the AMPDU only contains
5 packets and the throughput is only 60Mbps for 1x1 HE case in 5GHz.
Change the default vht_capab to VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MAX
(1048575), and the throughput can be increased to 83Mbps.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Link mode shows unknown when legacy (A or bg only) device connects to
APUT. Set the link mode to WIFI_2 when the host freq over 4000 and set
link mode to WIFI_3 when the host freq over 2000.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Added new flag CONFIG_WIFI_NM_HOSTAPD_AP for hostapd support. Once this
flag is enabled, softAP will be setup by hostapd. Both wpa_supplicant
and hostapd uses same task and eloop.
Included necessary hostapd files when compiling wifi samples if
CONFIG_WIFI_NM_HOSTAPD_AP is enabled. Added hostapd support for all
softAP command of L2 wifi shell commands.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Add basic WPA2 EAP-TLS support.
Also, add test infrasturcture esp. the certification handling,
non-certificate credentials are take as runtime input and certificated
are build time input for testing.
A real application can set certificates at runtime too.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Wi-Fi shell now uses _sta/_ap APIs to getch specific inteface types, so,
by default register as a Station.
This needs more work to handle multiple modes and mode switching.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
WIFI_REASON_DISCONN_UNSPECIFIED is 1, when disconnect reason is 0,
wpas_to_wifi_mgmt_disconn_status return the
WIFI_REASON_DISCONN_UNSPECIFIED and print error log "Disconnection
request failed (1)"
Signed-off-by: Gaofeng Zhang <gaofeng.zhang@nxp.com>
WPA supplicant as a network manager monitors interface events and
registers to the Wi-Fi NM module, so, adding a check for NM type before
registering the interface is wrong.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
We only need the interface to be administratively up, the operationl
status is managed by the WPA supplicant.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Use select_network instead of enable_network, then can trigger sta
connection mutiple times. Also update the configuration in
add_interface().
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Split wifi interface into station mode and soft-AP mode, as there may be
station and soft-AP two interfaces that work concurrently.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Add Platform Secure Architecture support support to use
HW acceleration, which needs to be called under PSA driver wrapper
in mbedtls 3.x.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
The wpas_to_wifi_mgmt_diconn_status() was missing "s" char,
so name it to wpas_to_wifi_mgmt_disconn_status() as that is
more descriptive.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Handle scan results event in order to avoid warning print
for unhandled event. The event is not used for anything atm,
this just prevents unknown event printout.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Support BSSID configuration while setting up the network information
as part of the connect command processing.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Channel 14 in JP is still allowed (though OFDM is disabled), this wasn't
handled by operating class 81, so, add 82 to the list.
We still need to full implement regulatory support in the WPA
supplicant but that is handled in separate fix.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This makes it readable and also scalable for upcoming extension of
operating classes.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If user selects a band, then we should restrict scanning channels to
that band, but using freq_list will only filter the results.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Make sure to copy LEN -1 bytes to the destination, to
accommodate the terminating null byte.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Even if the interface is not in connected state, allow disconnect to be
accepted, this behaviour regressed when the mode check was introduced
and if not connected then SSID will be NULL.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
