Remove legacy TCP stack as it is replaced by the new TCP2 stack.
The TCP2 stack has been the default stack since 2.4 release.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit implements the secondary service
Volume Offset Control Service (VOCS) server and client.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Since linker_final_pass.cmd is the actual linker script being
used to link the final Zephyr binary, rename it to linker.cmd.
This also renames LINKER_PASS2 to LINKER_ZEPHYR_FINAL simply
to clarify what it is used for, instead of ambiguous pass #n.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Using this actually would result in a linker input section being
put between output sections which is not correct syntax.
We have never seen this simply because the generated ones would
be included instead of the in-tree ones. So remove this just in
case, instead of linker errors.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Create a separate sub group for constraint APIs. This way it is
possible to reference this api directly in the power management
reference without mess with the rest of the documentation.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Put documentation about pm_power_state_set in the proper group,
power_management_hook_interface.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Allow callers to wait for an arbitrary amount of time, instead of always
waiting for a compile-time fixed period.
Signed-off-by: Josh Gao <josh@jmgao.dev>
Removed k_pipe_block_put and static functions only related to it.
After all the old usage of k_mem_block has been replaced by k_heap,
k_pipe_block_put still taking a deprecated k_mem_block as argument
becomes dead code. All APIs that hook it from kernel.h have been
confirmed to be removed. Since an asynchronous message descriptor
is only allocated in k_pipe_block_put, static functions for pipe_
async are removed as well.
Signed-off-by: Shihao Shen <shihao.shen@intel.com>
This patch includes initial support for FT800 display driver.
It includes basic features. It can be easily extended with more
FT800 display list and co-processor features.
Signed-off-by: Hubert Miś <hubert.mis@gmail.com>
STATUS32.DZ(bit 13) is the EV_DivZero exception enable bit, and it's
not enabled by default. we need to set it explicitly to enable divide
zero exception on early boot and each thread's setup.
The DZ bit is ignored on write and read as zero when there is no
hardware division configured. So we can simply set DZ bit even if
there is no hardware division configured.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
This feature predated the tickless kernel and has been in legacy mode
for a while. We now have no drivers or systems that do not support
tickless, so remove this option and cleanup the code to only use
tickless.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is another API that is being used in all timer drivers and is not
internal to the clock subsystem. Remove the leading z_ and make promote
it to a cross-subsystem API.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The clock/timer APIs are not application facing APIs, however, similar
to arch_ and a few other APIs they are available to implement drivers
and add support for new hardware and are documented and available to be
used outside of the clock/kernel subsystems.
Remove the leading z_ and provide them as clock_* APIs for someone
writing a new timer driver to use.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Prefix internal functions and structs with modbus_.
Use unit_id consistently instead of node_addr.
Fix mbm_ remainder and rename to mbc_.
Rename struct modbus_frame to modbus_adu since
ADU is closer to what the structure represents.
Let the compiler/linker do the job and
remove ifdef around mbc_validate_fc03fp_response().
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add function to get Modbus RTU interface index according
to interface name. This can be used to clearly identify
interfaces in the application.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add MODBUS RTU (over serial line) subsystem.
MODBUS RTU implementation supports booth server and
client roles. Some components of the implementation are based
on the uC/Modbus stack, which was published under Apache license,
(https://github.com/SiliconLabs/uC-Modbus
fdd1218a28e313c1212fed5ed42e5c65d3056a2c).
Resolves: #2854
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Kconfig option USB_HID_PROTOCOL_CODE does not allow to set
boot interface protocol code for specific HID device but
only to set the same value for all device.
Add new API function to allow the application to set
Protocol Code per device. Deprecate USB_HID_PROTOCOL_CODE option.
Fixes: #32778
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The pointer to interface descriptor in struct usb_cfg_data
is used to access and modify the descriptor at runtime.
Remove const qualifier and thus avoid unnecessary casts.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove support for counter_read and counter_get_max_relative_alarm as
they have been deprecated for at least 2 releases. As part of the
removal of counter_get_max_relative_alarm remove the code in all
counter drivers that implemented the API.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Introduce the necessary routines to have the user thread stack correctly
mapped and the functions to swap page tables on context switch.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Sparc architecture is strange. Va_list arguments are packed (1 byte
alignment) while unaligned access fails. Added dedicated handling of
Z_CBPRINTF_STORE_ARG which is copying the data word by word.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added missing errno.h include. Fixed Z_CBPRINTF_ARG_SIZE macro for
void * and cleaned up macro description.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The only user of arch_mem_domain_destroy was the deprecated
k_mem_domain_destroy function which has now been removed. So remove
arch_mem_domain_destroy as well.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Mark all variants of the DT_DMAS_LABEL APIs:
* DT_DMAS_LABEL_BY_IDX
* DT_DMAS_LABEL_BY_NAME
* DT_INST_DMAS_LABEL_BY_IDX
* DT_INST_DMAS_LABEL_BY_NAME
As deprecated in favor of utilizing:
* DT_DMAS_CTLR_BY_IDX
* DT_DMAS_CTLR_BY_NAME
* DT_DMAS_CTLR
* DT_INST_DMAS_CTLR_BY_IDX
* DT_INST_DMAS_CTLR_BY_NAME
* DT_INST_DMAS_CTLR
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There's no need to duplicate the linker section for each architecture.
Instead, move the section declaration to common-rom.ld.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove k_mem_domain_destroy and k_mem_domain_remove_thread as they've
been deprecated for at least 2 releases now.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Adds support for the Texas Instruments FDC2X1X Capacitance-to-Digital
Converter for Proximity and Level Sensing Applications.
Signed-off-by: Igor Knippenberg <igor.knippenberg@gmail.com>
The directory listing object is an internal object which
content is the aggregation of all the metadata of all objects
(including the directory listing object itself). The client
can read this value to get a list of all objects with names,
lengths, and other metadata.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds a Proxy callback structure with a callback for Node ID enable and
disable. This API follows the Friend and LPN API pattern in mesh/main.h,
and can be expanded with more callbacks later.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
There is no need to use this kconfig, as the phys-to-virt
offset is enough to figure out if the kernel is linked in
virtual address space in gen_mmu.py.
For code, use Z_VM_KERNEL instead.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
