sensor_value_from_double had a early overflow when converting the
fractional part (val2). This occured when input was more then
2147.493647 (inp >= INT32_MAX/1000000.0 + 0.01).
return value -ERANGE as this is what errno is set to by `strtod` and
similar posix functions.
fixes issue #39176
Signed-off-by: Simon Frank <simon.frank@lohmega.com>
LLVM defines __GNUC__ to 4 so the __fallthrough is nothing
through include/toolchain/gcc.h. So add a few lines for
a functional __fallthrough macro for LLVM. The fallthrough
attribute is supported since Clang 10.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add support for new API's log_backend_format_set and
log_format_set_all_active_backends to switch the logging format
for one backend and for all the active backends respectively.
Using format_set function pointer in log_backend_api struct as a hook
to set the log format at runtime in the backends. Add function pointer
table with helper functions to be used as a way to select log format.
Add supported log format types as macros to use with the API.
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
LwM2M engine Send operation support /dp.
Send operation based on Composite Read functionality
which is not enabled at engine side like composite write.
Added Kconfig configurable for composite read path list size.
Created generic Read object instance which is shared between
general read and Composite Read operation.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Change the CPU_CORTEX_R kconfig option to CPU_AARCH32_CORTEX_R to
distinguish the armv7 version from the armv8 version of Cortex-R.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Remove deprecated functions in the previous release. Note that PM API is
not marked as stable.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Macros are not type safe and can be expanded regardless of whether
they are syntactically correct or not. Also macros can result in
side effects when they expand.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Aligning with the rest of PM API, replace pm_power_state_exit_post_ops
with pm_state_exit_post_ops.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
- Cleanup list of includes
- Remove unused structs/definitions
- Make init function static (is called by system init)
- Make config/data naming and access consistent
- Remove redundant zero initialization of data
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Since the driver is now Devicetree based there are better ways to obtain
a reference to the device: use the DT node label with DEVICE_DT_GET or
continue using device_get_binding with the label defined in DT (an
arbitrary value).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The driver does not implement a display API, it has a custom API. Having
it under display is confusing, since display API consumers may expect
they can use it. These sort of custom drivers fit better under
drivers/misc.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add CAN controller device statistics support.
Initially the following per-device statistics are supported:
- Dominant bit transmission errors
- Recessive bit transmission errors
- Bit stuffing errors
- CRC errors
- Format errors
- Acknowledge errors
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Depending on whether X2APIC is enabled or not, it will be safer to grab
such ID from the right place.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will centralize CPUID related accessors. There was no need for it
so far, but this is going to change.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Logging v2 is utilizing complex preprocessing operations to
prepare message at compile time. Multiple operations are peformed
on log message arguments. However, it is expected that argument
will be evaluated only once (e.g. it can be a call to a function
with side effects). Adding additional layer which creates copies
of user arguments on stack and passes them to further processing.
Updated test for log_msg2 which is using internal macro which
got renamed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Always use runtime packaging in immediate mode. Removing attempt to
package on stack if possible. It would be done only to speed up
logging but that is not a requirement in immediate mode where
packaging time is fractional compared to backend processing. Using
runtime packaging also reduces stack usage in the context which calls
log message.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
NET_SOCKET_GET_NAME macro adds some extra parenthesis that, on XCC (based
on GCC 4.2) ends up in the generated assembly, thus causing `as` to error
with:
Error: junk at end of line, first unrecognized character is `('
It appears that the parenthesis are actually concatenated to the
generated name for identifier. This patch just removes them.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
The x86 and xtensa implementations of irq_offload() invoke synchronous
interrupts on the local CPU, and are therefore safe to use from within
an interrupt context. This is a cheap and portable way to exercise
nested interrupts, which are otherwise highly platform-dependent to
test. Add a kconfig to signal the capability.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
For functions returning nothing, there is no need to document
with @return, as Doxgen complains about "documented empty
return type of ...".
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
For functions returning nothing, there is no need to document
with @return, as Doxgen complains about "documented empty
return type of ...".
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
As use for simple message with no-segment send or receive.
This will be useful for ram-resource-constrained device.
such as bbc-microbit-v1.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Added support for Portfolio object support because LwM2M v1.1 conformance
test requirement that. This object is only for conformance test purposing.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Before this change, enabling CONFIG_BT_SETTINGS and calling
settings_load(), but delaying / not calling bt_enable would trigger an
assertion error due to a timeout. The fault is that the settings load
handler for the Bluetooth host assumes bt_enable has already been called
and sends HCI commands to the controller. This times out if HCI is not
running.
The fix is to skip loading Bluetooth settings before bt_enable. The doc
is updated to guide the user on how to enable Bluetooth after settings
have been loaded before.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
This structure is no longer used by drivers. Instead, each driver is
responsible to define the required fields and the types that are needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Introduce a new "zephyr,memory-region" compatible to be used when a new
memory region must be created in the linker script from the devicetree
nodes using the compatible.
Remove also the LINKER_DT_REGION_FROM_NODE macro and add a new
LINKER_DT_REGIONS macro to cycle through all the compatible regions.
In the same PR modify the DTS files and the linker scripts.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This enables the below configuration so the AP and EC are able to
communicate over eSPI:
CONFIG_ESPI_PERIPHERAL_EC_HOST_CMD
CONFIG_ESPI_PERIPHERAL_ACPI_SHM_REGION
CONFIG_ESPI_PERIPHERAL_CUSTOM_OPCODE
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
This align the RISC-V linker script with ARM linker script.
(The snippets-ram-sections.ld is included first inside the
RAMABLE_REGION)
Signed-off-by: Dino Li <Dino.Li@ite.com.tw>
Clarify that the reader MUST track the last sequence number read and
that the 'start' offset is not involved in that.
Some pre-conceptions + the sentence "the current state of the stream"
threw me off for a while. Thanks Andy for explaining this to me.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Makes the IRQ_CONNECT macro statically declarable for Xtensa (nothing
prevented it except its structuring). Allows for IRQ_CONNECT usage
on a xtensa only platform to be declared statically avoiding the
fluff of setting up and enabling irqs for cavs gpdma.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Add the extern declarations for the data and bss sub-section start and
end markers for memory of type OCM, so that the bss section within the
OCM memory can be properly zeroed at boot time.
Signed-off-by: Immo Birnbaum <Immo.Birnbaum@weidmueller.com>
Avoids copying the address and assigning the SID if the
PA list is used, as the values are ignored by the
controller, and thus there is no reason to copy
or assign the values.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Logging v2 is utilizing complex preprocessing operations to
prepare message at compile time. Multiple operations are peformed
on log message arguments. However, it is expected that argument
will be evaluated only once (e.g. it can be a call to a function
with side effects). Adding additional layer which creates copies
of user arguments on stack and passes them to further processing.
Updated test for log_msg2 which is using internal macro which
got renamed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Logging v2 did not support getting memory usage data. Adding this
support by creating common api for getting current and maximum
usage. Tracking of maximum usage is optional and can be enabled
using CONFIG_LOG_MEM_UTILIZATION.
Updated shell command to use common API.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add API to fetch current buffer usage. Add option to track
maximum buffer usage and API to fetch that value.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
