This allows application to increase channel's MTU and (in some cases)
MPS. When channel gets reconfigured dedicated callback is called to
inform application.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Some functions were being re-declared if the file was included without
USERSPACE being defined. In this scenarion we have some functions
implemented as static inline besides their prototypes.
This is also a code guideline problem (Rule 8.8).
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
interrupt controller, also places its relevant
peripheral sources allowing drivers to use the
DT macros instead of espressif headers.
Signed-off-by: Felipe Neves <felipe.neves@espressif.com>
This is a simple wrapper allowing multiple sys_heap regions to be
unified under a single allocation API. Sometimes apps need the
ability to share multiple discontiguous regions in a single "heap", or
to have memory of different "types" be allocated heuristically based
on usage (e.g. cacheability, latency, power...). This allows a
user-specified function to select the underlying memory to use for
each application.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Support DNS-SD Service Type Enumeration in the dns_sd library
and mdns_responder sample application.
For more information, please see Section 9, "Service Type
Enumeration" in RFC 6763.
https://datatracker.ietf.org/doc/html/rfc6763Fixes#38673
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
In panic mode, the function: z_shell_fprintf is expected to be
called from an interrupt context. Therefore, the dedicated assert
cannot be checked in this case.
Fixes#38612
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The task_wdt_init() API can fail to install a timeout for the fallback
hardware WDT (hw_wdt) without returning an error code. This patch
enables task_wdt_init() to return the hw_wdt install timeout error code
if the hw_wdt install timeout fails.
Signed-off-by: Nick Ward <nick.ward@setec.com.au>
When CONFIG_USERSPACE is enabled, the ELF file from linker pass 1 is
used to create a hash table that identifies kernel objects by address.
We therefore can't allow the size of any object in the pass 2 ELF to
change in a way that would change those addresses, or we would create
a garbage hash table.
Simultaneously (and regardless of CONFIG_USERSPACE's value),
gen_handles.py must transform arrays of handles from their pass 1
values to their pass 2 values; see the file's docstring for more
details on that transformation.
The way this works is that gen_handles.py just pads out each pass 2
array so its length is the same as its pass 1 value. The padding value
is a repeated run of DEVICE_HANDLE_ENDS values. This value is the
terminator which we look for at runtime in places like
device_required_handles_get(), so there must be at least one, and we
error out in gen_handles.py if there's no room in the pass 2 array for
at least one such value. (If there is extra room, we just keep
inserting extra DEVICE_HANDLE_ENDS values to pad the array to its
original length.)
However, it is possible that a device has more direct dependencies in
the pass 2 handles array than its corresponding devicetree node had in
the pass 1 array. When this happens, users have no recourse, so that's
a potential showstopper.
To work around this possibility for now, add a new config option,
CONFIG_DEVICE_HANDLE_PADDING, whose value defaults to 0.
When nonzero, it is a count of padding handles that are inserted into
each device handles array. When gen_handles.py errors out due to lack
of room, its error message now tells the user how much to increase
CONFIG_DEVICE_HANDLE_PADDING by to work around the problem.
It looks like a real fix for this is to allocate kernel objects whose
addresses are required for hash tables in CONFIG_USERSPACE=y
configurations *before* the handle arrays. The handle arrays could
then be resized as needed in pass 2, which saves ROM by avoiding
unnecessary padding, and would avoid the need for
CONFIG_DEVICE_HANDLE_PADDING altogether.
However, this 'real fix' is not available and we are facing a deadline
to get a temporary solution in for Zephyr v2.7.0, so this is a good
enough workaround for now.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This reverts commit ec331c6fe2.
Although it's a valid simplification under the assumption that we're
going to be padding the array out anyway, it would use extra ROM if we
fix the build system issues that are currently forcing gen_handles.py
to introduce extra padding in the handles arrays for linker pass 2.
On the (perhaps optimistic) assumption that we're going to fix the
build system, let's get rid of a commit that would get in the way. The
extra "complexity" in device_required_handles_get() is trivial.
This gets rid of a comment describing the linker passes, but the
structure of the comment is a bit misleading (and it contains
incorrect information for the results of pass 2: the terminator at the
end is DEVICE_HANDLE_ENDS, not DEVICE_HANDLE_NULL).
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This reverts commit 0c6588ff47.
It's not clear that the supported devices are being properly computed,
so let's revert this for v2.7.0 until we've had more time to think
it through.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This reverts commit b01e41ccdd.
It's not clear that the supported devices are being properly computed,
so let's revert this for v2.7.0 until we've had more time to think
it through.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add reset causes for temperature (e.g. overheating), hardware faults
and a user initiated reset.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
On non-XIP system, RAM region overlaps ROM region which cause PMP region
overlapping. Padding RAM region by adding a output section to update
the next free address of RAM region.
Signed-off-by: Jim Shu <cwshu@andestech.com>
In non-XIP system, because ROMABLE_REGION == RAMABLE_REGION, setting
__rom_region_size/end symbol at linker script end will mistakely
contain RAMABLE_REGION in it.
Move __rom_region_end symbol to end of common ROMABLE_REGION (text
and rodata) instead in non-XIP system.
Signed-off-by: Jim Shu <cwshu@andestech.com>
In some HCI packed structures we place non-packed structs inside (in
particular the address structs).
Alignment is not an issue for those because all their members are just
byte-aligned, but size is. If the compiler ever packs those it would
become a real problem, and so detect this at build time.
See the link below for more info:
https://stackoverflow.com/a/66389167
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
There were some leftovers in logging after attempt to use
logging as tracing backend. Removing all references since it
lead to test compilation failures.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added log_internal.h for internal APIs. Move functions out of
log_core.h. Log_core.h shall have only macros and functions related
to logging message creation. Log_core.h is included by log.h thus
number of dependencies in that headers must be limited to minimum
to allow including without risk of circular dependencies.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add a new struct that provides information to the upper
layer when accepting an connected isochronous stream.
The CIG ID and CIS ID makes it possible for the upper layer
to determine which ISO channels are "together" in a group.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some SMP applications have threading designs where every thread
created is always assigned to a specific CPU, and never want to
schedule them symmetrically across CPUs under any circumstance.
In this situation, it's possible to optimize the run queue design a
bit to put a separate queue in each CPU struct instead of having a
single global one. This is probably good for a few cycles per
scheduling event (maybe a bit more on architectures where cache
locality can be exploited) in circumstances where there is more than
one runnable thread. It's a mild optimization, but a basically simple
one.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Issue #38271
Implement a getter for emulators similar to device_get_binding. This
function can be used to get the emulator instance during tests to call
emulator specific functions.
Example: The current BMI160 emulator pre-defines a finite set of data
samples that will be returned. If a test was to be written for logic
that uses that data, then the emulator would become completely useless
without the ability for the test to define what data should be returned.
This will also help in exercising error conditions in tests.
Signed-off-by: Yuval Peress <peress@chromium.org>
When creating a socket, all of the registered socket implementation are
processed in a sequence, allowing to find appropriate socket
implementation for specified family/type/protocol. So far however,
the order of processing was not clearly defined, leaving ambiguity if
multiple implmentations supported the same set of parameters.
Fix this, by registering socket priority along with implementation. This
makes the processing order of particular socket implementations
explicit, giving more flexibility to the user, for example when it's
neeed to prioritze one implementation over another if they support the
same set of parameters.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add the BT_ISO_SDU_BUF_SIZE which can be used to declare
the TX buffers for ISO, similar to the BT_L2CAP_SDU_BUF_SIZE
macro for L2CAP.
This also updates the ISO samples to use this as well
updating the SDU check to use
CONFIG_BT_ISO_TX_MTU/CONFIG_BT_ISO_RX_MTU without
subtracting the BT_ISO_CHAN_SEND_RESERVE to make the
API more clear.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When _app_smem region is empty, alignment is also needed. If there
is no alignment, the _app_smem_start used by arm mpu can be lower
than __rodata_region_end, and this two regions can overlap.
The Armv8-R aarch64 MPU does not allow overlapped regions.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
Fix the attrs of init fix mem regions for userspace.
Allow RAM region and RO region be read-only for EL0.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
Add a new macro MEM_DOMAIN_ALIGN_AND_SIZE for mmu and mpu mem
alignment.
MEM_DOMAIN_ALIGN_AND_SIZE is
- CONFIG_MMU_PAGE_SIZE, when mmu is enabled.
- CONFIG_ARM_MPU_REGION_MIN_ALIGN_AND_SIZE when mpu enabled.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
Include the new introduced include/arch/arm64/mm.h instead of the
arm_mmu.h or arm_mpu.h.
Unify function names z_arm64_thread_pt_init/z_arm64_swap_ptables with
z_arm64_thread_mem_domains_init/z_arm64_swap_mem_domains for mmu and
mpu, because:
1. mmu and mpu have almost the same logic.
2. mpu doesn't have ptables.
3. using the function names help reducing "#if define" macros.
Similarly, change z_arm64_ptable_ipi to z_arm64_domain_sync_ipi
And fix a log bug in arm_mmu.c.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
The defination of K_MEM_PARTITION_* marcos denpens on wheather it is
mmu or mpu, so I move those definations for mmu into arm_mmu.h and
create mpu relevant ones in arm_mpu.h
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
The arm_mmu.h and arm_mpu.h have some common logic. To reduce some
redundency and the ugly 'if defined' marcos, I add a new header
include/arch/arm64/mm.h to include arm_mmu.h or arm_mpu.h depending on
CONFIG_ARM_MMU or CONFIG_ARM_MPU. Thus, in the future, the common code
of mmu and mpu should be in include/arch/arm64/mm.h.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
This patch mainly moves mpu related code from
arch/arm64/core/cortex_r/mpu/ to arch/arm64/core/cortex_r/ and moves
the mpu header files from include/arch/arm64/cortex_r/mpu/ to
include/arch/arm64/cortex_r/
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
Each backend can configure separately features like colors on/off, VT100
handling and so on. This can be very handy for planned MQTT backend.
Shell will not send VT100 commands when VT100 is not enabled globally or
for particular backend.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
VT100 commands are now stored as strings rather than character arrays.
This change will make it easier to create a unified macro for sending
all VT100 commands.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
As per #38352, we would like to start building out PTP (IEEE 1588)
support for superset of gPTP functionality in Zephyr. This is the first
step to abstract away some key interfaces from NET_GPTP umbrella to
NET_L2_PTP.
Signed-off-by: Alex Sergeev <asergeev@carbonrobotics.com>
Add a new utility macro to obtain an optional reference to a device. If
the provided node_id is not enabled, the macro falls back to NULL.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The LPI (Locality-specific Peripheral Interrupts) are edge-triggered
message-based interrupts that can use an Interrupt Translation
Service (ITS) to route an interrupt to a specific Redistributor and
connected PE.
This implement the necessary LPI support when an ITS is enabled.
The LPI states are stored in memory-backed tables.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Add driver API for the Interrupt Translation Service GICv3 module.
The Interrupt Translation Service (ITS) translates an input EventID
from a device, identified by its DeviceID, and determines the
corresponding INTID for this input and target Redistributor + target
PE for that INTID to be delivered as LPI interrupt.
The API permits :
- allocating a new unique LPI interrupt number
- initializing support for a new DeviceID and the required EventIDs
- mapping a DeviceID + EventID to a LPI interrupt number
- triggering an LPI with a DeviceID + EventID
This API will be used by the PCIe MSI/MSI-X logic in another patchset.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Move memory.h out of the way in a more "private" space
(include/linker/devicetree_reserved.h) to prevent polluting the
devicetree space.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
- Documentation of the 0 return value for ns_write function
- Ajusted lines length limit from 80 to 100
- Fixed extra and missing parameters for nvs_fs
- Misc spelling/grammar changes
Signed-off-by: Ramiro Merello <rmerello@itba.edu.ar>
