Remove unstructured and unused doxygen groups for tests. We will now add
doxygen comments per test function and follow a more structured
grouping.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Replaces platform whitelists with "depends_on: watchdog" to make the
watchdog test build for all supported platforms. Also updates the
testcase name to follow the new <component>.<subcomponent>
classification scheme.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Makes the dual timeout test conditional upon the nrfx watchdog driver
because not all watchdogs can support multiple timeouts.
Test now passes on frdm_k64f, hexiwear_k64, and usb_kw24d512 boards.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This patch adjusts some of the timeouts for the RTC sample test. The
NXP RTC varies a little bit from the QMSI due to the way the timer
count and alarm count work. The NXP will trigger an alarm when the
timer count and alarm count are the same, but only when it increments
to the next value.
If you set the alarm to be 1 second past the current time, it may take
up to 2 seconds. Setting the alarm equal to the current time will
result in an alarm occurring in less than 1 elapsed second.
Signed-off-by: Andy Gross <agross@kernel.org>
This patch adds a prescaler configuration option that denotes the
number of RTC ticks per second. This is used to calculate the value
for 1 second.
Signed-off-by: Andy Gross <agross@kernel.org>
Ensure that sanitycheck runs this sample only on boards with
right drivers support. This test was picking all targets and
executing on each of them .This eliminates incorrect builds.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
New test checks watchdog API if the simpliest test cases work
correctly. Each test contains description at the begining of the
source file.
This implementation replace old SoC-centric implementation.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
Add hardware dependencies and filters to make sure we do not explode if
for example we try to build a sample/test using rtc when the platform
does not support that.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Instead of completely excluding those tests, mark them as skipped and
provide an noop function that marks the test as skipped where test is
not supported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds a translation layer to make the nrfx driver for the nRF SPIM
(SPI Master with EasyDMA) peripheral accessible via the Zephyr's API.
The shim is provided only for nRF52840 because of a hardware anomaly
present in nRF52832. See Anomaly 58 (SPIM: An additional byte is clocked
out when RXD.MAXCNT = 1) in Errata for this chip.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Following tests were failing on a microcontroller with 32KB flash:
benchmark.application
crypto.ecc_dh
crypto.ecc_dsa
test_build_ethernet
test_build_sensors_a_m
The min_flash option has been added in the test case yaml files.
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
This adds to the spi_loopback test board-specific configurations
for the following boards:
- nrf51_pca10028
- nrf52_pca10040
- nrf52840_pca10056
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
It was much more limited than the spi_loopback test, and of course using
the legacy API. Removing it then.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of using CONFIG_POLL, which is not directly related to SPI and
is a kernel option, let's have SPI_ASYNC instead. When enabled, it will
select POLL automatically.
Fixes#5839
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
tx_bufs/tx_count and rx_bufs/rx_count can be hold in another dedicated
structure, thus reducing the number of parameters to transceive. This
permits to avoid using the stack when calling transceive.
Since we saved parameters, we can expose back the struct device pointer,
to stay consistent with other device driver APIs.
Fixes#5839
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No need to verify that the configuration is proper if we are
compiling the driver for unit test and not going to ever run
the test.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A new build test for gpio drivers is added to build_all testcase.yaml.
The gpio_sx1509 driver is enabled in the .conf file and dts.fixup macros
are added for the driver.
Signed-off-by: Aapo Vienamo <aapo.vienamo@iki.fi>
The SAM0 SoC was switched to use DTS for SPI configuration. Adapt the
spi_loopback test configuration for the Arduino Zero to use the
correct device name.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add a testcase.yaml configuration to spi_loopback test to include
it into sanitycheck.
Fixes#4576
Signed-off-by: Daniel Wagenknecht <wagenknecht.daniel@gmail.com>
This restores the board specific configurations that were present
before moving the test to using KConfig.
<board>.conf files from boards subdirectory get merged with
prj_base.conf file.
Signed-off-by: Daniel Wagenknecht <wagenknecht.daniel@gmail.com>
Convert this test to using KConfig instead of conditional compilation.
Standard configuration is provided by prj_base.conf and KConfig
default values.
Remove prj_<board>.conf files.
Signed-off-by: Daniel Wagenknecht <wagenknecht.daniel@gmail.com>
The introduction of device tree support sensors need to update the
dts.fixup file in build_all to make sure that we still build.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we have an application level dts fixup, we can re-enable the
fxos8700 sensor in the build_all test. Also added fxas21002 and max30101
sensors which were missing.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The following drivers are in the process of support getting their I2C
name, bus, address params from device tree. However if a given board
that supports device tree doesn't have one of these sensors we can't
build it.
To address this we add a dummy dts.fixup at the application level with
provides values for the defines we'd normally get from the dts
generation.
Fixes: #5722
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove SPI_*_IRQ_PRI from tests and samples.
Using DT to get the *_IRQ_PRI, we can't
override it using Kconfig.
If needed, use a BOARD_NAME.overlay file to
override default values.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
This test should be blacklisted for any board based
on the POSIX arch, not just the native_posix board
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
