Refactor the ESP32 target SOCs together with
all related boards. Most braking changes includes:
- changing the CONFIG_SOC_ESP32* to refer to
the actual soc line (esp32,esp32s2,esp32s3,esp32c3)
- replacing CONFIG_SOC with the CONFIG_SOC_SERIES
- creating CONFIG_SOC_FAMILY_ESP32 to embrace all
the ESP32 across all used architectures
- introducing CONFIG_SOC_PART_NUMBER_* to
provide a SOC model config
- introducing the 'common' folder to hide all
commonly used configs and files.
- updating west.yml to reflect previous changes in hal
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Adds overlay and config for xmc45_relax_kit.
The Kconfig entry CONFIG_SPEED_OPTIMIZATIONS=y must be set
to pass the test at baudrate 921600 bps.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
This commit configures the testcase to run on the
stm32u5x5 target boards. USART2 is selected
Pins Tx and Rx (PD5 PD6 on CN9) must be connected on the HW board
to pass the test.
The USART transfer uses the GP DMA transfer with request
27 and 26 on 2 DMA channels (0-15).
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This commit configures the testcase to run on the
stm32u585 target boards. USART3 is selected
Pins Tx and Rx (PD8 PD9 on CN14) must be connected on the HW board
to pass the test.
The USART transfer uses the GP DMA transfer with request
28 and 29 on 2 DMA channels (0-15).
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Configure through an overlay file, the nucleo_wb55rg board
for running the tests/drivers/uart/uart_async_api.
DMAMUX is used for transfer on channels 0 & 1 with
LPUART peripheral request 17 & 16.
No hw flowcontrol for this test.
Connect pin A0 & A1 of CN8 to PASS the test.
Note that I2C3 pin assignment might conflict (PC0 & PC1).
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Move to use DEVICE_DT_GET instead of device_get_binding as we
work on phasing out use of DTS 'label' property.
Also, fixed issue that change exposes with SEGGER RTT testing
in that in some platforms the device getting selected for the
RTT test was not the RTT device.
Signed-off-by: Kumar Gala <galak@kernel.org>
This PR adds support for the RT1060_EVKB as a variant of the RT1060 EVK.
Blinky app tested locally on RT1060_EVKB.
Signed-off-by: Nickolas Lapp <nickolaslapp@gmail.com>
This sets the dts of dma for using the uart 6 asynch api.
The stm32f746 has a dma V1 with request 5 for Tx/Rx usart6
The Tx&Rx pins (PG14, PG9) of the usart6 are connected
on the nucleo_f746zg board to pass the test
The CONFIG_DCACHE=n must also be set to disable Dcache.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This sets the dts of dma for using the uart 6 asynch api.
The stm32f767 has a dma V1 with request 5 for Tx/Rx usart6
The Tx&Rx pins (PG14, PG9) of the usart6 are connected
on the nucleo_f767zi board to pass the test
The CONFIG_DCACHE=n must also be set to disable Dcache.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
add nxp,loopback mode to boards with LPUART. This will enable testing
the UART async api without a physical loopback connection.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
define uart peripheral that can be connected as a loopback using
external jumper for all boards this test can be run against.
Additionally, all RT boards require DMA memory to be noncacheable. Move
SRAM to DTCM for all RT10xx series boards, and to noncacheable OCRAM for
RT11xx series.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add a test case that ensures that uart_rx_enable() can be successfully
called after RX is disabled with uart_rx_disable() and also when it is
disabled automatically after the provided RX buffer is filled up.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
It enables the usart6 to run the testcase with a DMA
tests/drivers/uart/uart_async_api. DMA2 (of type V1)
is configured on channel 5 (request) streams 7 & 2.
USART Tx and Rx PG14 - PG9 pins (14 & 16 of CN10)
are connected to PASS the test.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This sets the dts of DMA for using pn the uart 2 i.
The stm32h723 has a DMAMUX and request are 44 and 43 for usart2
The Tx&Rx pins PD5 and PD6 of the usart2 are connected
on the nucleo_h723zg board to pass the test
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add configuration for testing the usart3 through the dma1
on the nucleo_l152re target.This test requires the Tx pin
to be connected to the RX pin on the board.
Pin definition is added for this usart instance.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This commit configures usart3 to use dma in uart_async_api test
on nucleo_l552ze_q platform.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit configures usart3 to use dma in uart_async_api test
on stm32l562e_dk platform. Short pin2(PC10) & pin 3 (PC11) of usart3
in CN4 connector on stm32l562e_dk platform.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Adds nucleo_g071rb board to the uart_async_api test.
Therefore additionally add usart1 in board definitions.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This sets the dts of dma for using the uart asynch api.
The stm32l475 has a dmamux with request 2 for Tx/Rx usart4
The Tx&Rx pins (PA0, PA1) of the usart4 are connected
on the disco_l475_iot1 board to pass the test.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This commit adds the asynchronous UART API testing support on the
nucleo_l4r5zi board.
The usart3 module is used as the secondary loop-back UART, which is
required to run this test.
Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
This commit adds the asynchronous UART API testing support on the SAM
E54 Xplained Pro board.
The SERCOM1 module is used as the secondary loop-back UART, which is
required to run this test.
Note that no external UART loop-back connection is necessary to run
this test, because the SERCOM1 UART TX and RX pads are configured to be
internally connected; it is, however, still necessary to configure the
pinmux because the module pads are not connected until the pinmux is
configured.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Convert DT_UART_{0,1}_NAME to DT_NODELABEL() references as the cases are
board specific and this allows us to remove DT_UART_{0,1}_NAME defines
in dts_fixup.h
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds the asynchronous UART API testing support on the SAM
R21 Xplained Pro board.
The SERCOM3 module is used as the secondary loop-back UART, which is
required to run this test.
Note that no external UART loop-back connection is necessary to run
this test, because the SERCOM3 UART TX and RX pads are configured to be
internally connected; it is, however, still necessary to configure the
pinmux because the module pads are not connected until the pinmux is
configured.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the asynchronous UART API testing support on the SAM
D21 Xplained Pro board.
The SERCOM1 module is used as the secondary loop-back UART, which is
required to run this test.
Note that no external UART loop-back connection is necessary to run
this test, because the SERCOM1 UART TX and RX pads are configured to be
internally connected.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
We rename the nRF91 Dev Kit board target (nrf9160_pca10090)
to nrf9160dk_nrf9160. We update all associated references
in the supportive documentation and all nRF9160-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Check for proper driver behaviour if timeout for uart_rx_enable or
uart_tx is set to K_FOREVER.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
move uart.h to drivers/uart.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added tests for async UART API and test configuration for
nrf52840_pca10056 board.
For tests to work, RX and TX pins have to be connected together
and second UART is needed to output results to console.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
