Add verification of all stream's SDU, RTN and PHY rather than
just the first.
Also add another test case where only a subset of streams are being
reconfigured, but where the above values shall be updated for
all streams.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit increases the buffer used for commands
in the control channel within an instance of the
modem_cmux module. The buffer was not large enough to
store an MSC command if the optional break signals
where included. This commit fixes the issue and
updates the test suite to use the max size MSC message.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
Use the same pins as when testing with SIUL2 EIRQ interrupt
controller, but instead test routing the external interrupts
to WKPU controller.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
When configuring in/out pins for callback tests, pass the GPIO flags
coming from the in/out-gpios respective nodes.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
in case CONFIG_VL53L1X_INTERRUPT_MODE=n or
CONFIG_VL53L1X_XSHUT=n, the driver won't compile
Signed-off-by: Cyril Fougeray <cyril.fougeray@worldcoin.org>
Better group for logging tests removing verbosity and redundancy in
identifiers and making the sub-component a bit more uniform and clear.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This allow to run the following PTS test:
- DFU/SR/FD/BV-06-C
- DFU/SR/FD/BV-13-C
- DFU/SR/FD/BV-14-C
- DFU/SR/FD/BV-15-C
- DFU/SR/FD/BV-16-C
- DFU/SR/FD/BV-17-C
- DFU/SR/FD/BV-18-C
- DFU/SR/FD/BV-22-C
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
The malloc arena/heap size setting can be adjusted using different
Kconfig options, depending on the libc implementation. This means
prj.conf can't be used to set this value on projects that can be built
for multiple libcs without generating a Kconfig warning.
Note: similar fix was applied for the hash_map sample, see
7ef8911e8c
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
rand32.h does not make much sense, since the random subsystem
provides more APIs than just getting a random 32 bits value.
Rename it to random.h and get consistently with other
subsystems.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Pass only speficied number of handler to read_params for GATT read
multiple. This is to avoid sending invalid (zeros) handles in
ATT_READ_MULTIPLE_REQ.
This was affecting GATT/CL/GAR/BI-18-C and GATT/CL/GAR/BI-19-C
qualification test cases.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This was already excluded from
libraries.libc.newlib_nano.thread_safety.userspace.stress and it's now
failing in libraries.libc.newlib.thread_safety.userspace.stress as well.
The issue is being rootcaused to a toolchain issue but a proper fix has
not been identified yet, exclude that test as well in the meantime.
Link: https://github.com/zephyrproject-rtos/zephyr/issues/61129
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The desired current/voltage properties make use of milliamps/volts while
the present current/voltage properties make use of microamps/volts.
Fix the desired current/voltage properties to be consistent with the
present current/voltage properties where they're most likely to be used
with.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Adds bsim test to verify that composition data page 1 (CDP1) is
encoded and decoded correctly.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
This fixes regression introduced in
https://github.com/zephyrproject-rtos/zephyr/pull/63556
In the PR above `bt_mesh_init()` call was moved to `BTP_MESH_INIT`
command to allow to select alternative composition data when starting
the stack. AutoPTS sends `BTP_MESH_CONFIG_PROVISIONING` command
before `BTP_MESH_INIT` to prepare the provisioning context. But
because `bt_mesh_init()` is now called after
`BTP_MESH_CONFIG_PROVISIONING` command is sent, this configuration is
reset to the default which makes PTS tests to fail.
To solve this, this commit calls introduces a new command,
`BTP_MESH_START`, which will replace the original `BTP_MESH_INIT`
command. `bt_mesh_init()` will stay in `BTP_MESH_INIT` while the stack
will be started in `BTP_MESH_START` command.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This sets the stack size appropriate for SPARC. Tested on the board
configurations qemu_leon3 and gr716a_mini.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
When the timer frequency is known at compile time, make sure we can use any
time conversion macro as a global initializer.
Signed-off-by: Keith Packard <keithp@keithp.com>
DFU/SR/FD/BV-59-C tests Distributor self-update. Because the actuall
firmware swapping doesn't happen, we need to just simulate the swapping
by setting new Firmware ID sent by LT. We use slot to take firmware id
as by procedure, Fw Update Server doesn't know about it.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Fixed issue when reprovisioning is done on a device with
both RPR client and server on the same device.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
Update babblesim tests for testing chaining for advertising to ensure that
we spill over to the next PDU
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Updates the chaining for advertising.
Instead of unconditionally adding a new PDU when new data
is added we now instead fill the last PDU in the chain with
the incoming data, only adding a new PDU when there is
not enough room.
This reduces the nr. of PDUs used for advertising, and also
fixes some qualification failures
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
When the legacy LLCP implementation was removed this Kconfig option was
mistakenly left over. Remove it now with all its users.
Fixes#63212.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit sets the C/R (command/response) bit when UIH
CMUX frames are sent from the modem_cmux module. This bit
is ignored by some modems like the Quectel BG95, as there
is no defined response to this specific CMUX frame type.
However, other modems, like the TELIT ME910, require the
bit to be set (command). If the bit is not set, the modem
will simply ignore the frame completely.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
The `test_1cpu_drain_wait` tests iff the thread of a work queue
that is waiting to be drained can submit work item to the
queue. A timer is created with a callback funciton to submit a
work item to the same queue, to help demonstrate that behavior.
However, the work item submitted by `test_drain_wait_cb` to the
`coophi_queue` isn't initialized, and can hit assertion if it
is processed by the work queue.
Fixes#63559
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Remove this command as composition can only be set in bt_mesh_init call
which is called before settings are loaded.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
In some RPR tests we need to pass alternative composition data when
testing CDP128. When bt_mesh_init is called from mesh service
registration callback, we can't pass any arguments. Therefore we need
to move bt_mesh_init call out from mesh service registration to
BTP_MESH_INIT command.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
