For tests that set CONFIG_MP_NUM_CPUS, switch to using
CONFIG_MP_MAX_NUM_CPUS instead as we work to phase out
CONFIG_MP_NUM_CPUS.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
This commit changes some tests from using zassert_equal to validate
the pointers to using the zassert_is_null and zassert_not_null.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Many device pointers are initialized at compile and never changed. This
means that the device pointer can be constified (immutable).
Automated using:
```
perl -i -pe 's/const struct device \*(?!const)(.*)= DEVICE/const struct
device *const $1= DEVICE/g' **/*.c
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
If assert triggers, display the current state in order not
to confuse assert message reader.
Same logic is used for following asserts.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Current API allowed to get notified when the maximum system latency
changes, however, a single callback was allowed. The design was intended
for SoC specific actions when latency changes. However, in some cases
drivers may also want to know the current maximum latency to perform
local actions if other parts of the system modify it.
This patch updates the API with a pair of subscribe/unsubscribe calls to
achieve such goal. Tests have been updated to show how the API can be
used.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
As Zephyr currently requires CMake version 3.20.0, update all
occurrences of cmake_minimum_required.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Sometimes we want to entirely decouple the system PM from the device PM,
leaving the devices to manage its own power states using the runtime PM.
This is currently not possible because the suspend / resume code path is
triggering the device PM hooks even when the runtime PM is enabled.
Introduce a new PM_DEVICE_RUNTIME_EXCLUSIVE symbol to allow the platform
to skip the device PM triggers on suspend / resume.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Files including <zephyr/kernel.h> do not have to include
<zephyr/zephyr.h>, a shim to <zephyr/kernel.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Test the behaviour of the PM device_runtime API on devices that do not
support power management.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Validate the behaviour of `k_can_yield` in pre-kernel, ISR, and idle
thread and standard thread contexts.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Move the `pm_device_runtime_init_*` functions from <pm/device_runtime.h>
to <pm/device.h>. The initial device state should be settable
independently of whether `CONFIG_PM_DEVICE_RUNTIME` is enabled.
This also resolves a compilation error when attempting to use these
functions without also including <pm/device.h>.
Function documentation is also updated to be more general than only
referencing runtime PM, as this also applies to system PM and manually
run actions.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add a new tests that checks the behavior of the policy when latency
requirements are imposed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Test that policy manager behavior is correct when allowing/forbidding
certain states.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The residency policy, is in reality, influences by other parameters for
example constraints. It has been renamed to "DEFAULT" policy to make it
more general. The "APP" policy has been renamed to "CUSTOM" to better
represent its purpose.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Aligning with the rest of PM API, replace pm_power_state_exit_post_ops
with pm_state_exit_post_ops.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add an initial demonstration of a physical power domain running on the
`qemu_cortex_m3` platform.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
In order to align with macros used to obtain a device reference (e.g.
DEVICE_DT_GET), align the PM macros to use "GET" instead of "REF". This
change should have low impact since no official release has gone out yet
with the "REF" macros.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new test to verify the policy API behavior. Test also checks that
custom policies can be implemented.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Return a constant reference to the next state instead of a copy of
struct pm_state_info. When the next state should be active, just return
NULL. Struct copying should be in general avoided, specially in code
paths executed frequently as is this one.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove the manual selection of `CONFIG_GPIO_EMUL` as it is now enabled
by default when devicetree nodes exist.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The notification is sent after the subsystem select the power state to
use and after suspend devices. The callback should not try to access a
device. In this case, uart through LOG macros.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
