The size_t type is either compatible with an int on 32-bit target, or
a long on 64-bit targets. It could even be a long even on some 32-bit
targets. Let's use the z qualifier in the printf format to be compatible
with whatever flavor in use.
In case of pointers, let's just use %p with pointers directly and
avoid casts altogether.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/__assert.h to sys/__assert.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move ring_buffer.h to sys/ring_buffer.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move uart.h to drivers/uart.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move flash.h to drivers/flash.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move disk_access.h to disk/disk_access.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move flash_map.h to storage/flash_map.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
USBD_CFG_DATA_DEFINE macro has not consider that a class
could have more than one set of usb_cfg_data struct.
If a class has more than one set of usb_cfg_data
then they should be sorted the same way like by
USBD_DEVICE_DESCR_DEFINE macro.
Fixes: #16240
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Parameter of set_interface_status is no more the interface index
but a pointer to interface descriptor.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Remove duplicated execution path for composite configuration, USB
device stack initialization is done inside stack for both cases.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In order to unify the legacy and composite code, move the class and
vendor request handler buffer into the USB device code, just like in
composite mode. The option is renamed from USB_COMPOSITE_BUFFER_SIZE
into USB_REQUEST_BUFFER_SIZE and also replaces the USB_DFU_MAX_XFER_SIZE
and USB_HID_MAX_PAYLOAD_SIZE options.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Interface Association descriptor has to be used with Windows 7.
Add CONFIG_CDC_ACM_IAD option to force its usage, disabled by default.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Partially revert commit ea177e785ca3
("usb: dfu: set bwPollTimeout dynamically")
Introduced fix does not work proper because there is no way to be
sure that a control stage had success before start erase process.
Instead IMG_ERASE_PROGRESSIVELY configuration should be used
if the erase of the flash takes longer time.
resolves: #15497
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Added check to see if CONFIG_BT_CTLR_TX_BUFFER_SIZE is defined,
and use that as the BT_L2CAP_MTU if that is the case. Otherwise,
use the previously hard coded MTU size (64). This enables users
to configure the MTU, enabling longer transfers.
The fix was inspired by how this is solved in
samples/bluetooth/hci_uart/src/main.c
Tested on nrf52840_pca10056.
Signed-off-by: Dennis Wildmark <dennis.wildmark@assaabloy.com>
Use new method for defining USB CDC ACM devices using UTIL_LISTIFY and
device count from menuconfig.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
DEVICE_COUNT for some USB classes means how many instances of the
class can be supported by USB stack.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Disable bulk slot image erase when progressive erase is on.
Erase of image bank is performed by image collection procedure
progressively.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added bBreak, bRingSignal, bFraming, bParity and bOverRun
handling in cdc_acm_line_ctrl_set.
Reference: Chapter 6.5.4 of Universal Serial Bus Communications Class
Subclass Specification for PSTN Devices rev 1.2
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Set bwPollTimeout for DFU_GETSTATUS request dynamically.
For now, adjust bwPollTimeout only during DNLOAD stage.
Fixes: #8734
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Only enable netusb for the right configuration of interface and
alt_setting.
Fixes#13560
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Merge cb_usb_status_composite and cb_usb_status and use common
forward_status_cb for both composite and normal devices.
Fixes#14882
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This patch increases size of acl_tx_pool and makes sure that acl_read_cb
waits for available buffers.
Size of acl_tx_pool is now configurable with CONFIG_BT_CTLR_TX_BUFFERS.
Previously it was possible to run out of buffers and in that case
acl_read_cb returned. This caused ACL data TX to stall because device
did not read data from HCI out endpoint.
Fixes#14899
Signed-off-by: Matias Karhumaa <matias.karhumaa@gmail.com>
Use ringbuf library for handling RX CDC ACM path. Remove old code
artifacts handling specific hardware.
Fixes#14288
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove old unused code sending media status, sending this packet
causes Windows problems although Linux works with it. Removing this
code does not affect RNDIS functionality.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use standard NET_ETH_MAX_FRAME_SIZE for frame size calculation. This
changes buffer from 1522 to 1514 + 2 + 4. Remove also magic numbers.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use standard defined frame size for buffer and wMaxSegmentSize
parameter. Changes frame size from 1522 to 1514.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use USB transfer API for data transfer. Simplify notification count,
removing delayed work, use usb_transfer() logic instead.
Fixes#14127
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
