After the removal of the virtualcom DT node in 5071eee, using the chosen
node is no longer functional. Instead the Kconfig
CONFIG_UART_CONSOLE_ON_DEV_NAME is used to locate the correct UART.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
We use the following commands to rename any
LED._GPIO_{CONTROLLER,PIN,FLAGS} to
DT_ALIAS_LED._GPIOS_{CONTROLLER,PIN,FLAGS}
git grep -l LED._GPIO_CONTROLLER | xargs sed -i 's/LED\(.\)_GPIO_CONTROLLER/DT_ALIAS_LED\1_GPIOS_CONTROLLER/g'
git grep -l LED._GPIO_PIN | xargs sed -i 's/LED\(.\)_GPIO_PIN/DT_ALIAS_LED\1_GPIOS_PIN/g'
git grep -l LED._GPIO_FLAGS | xargs sed -i 's/LED\(.\)_GPIO_FLAGS/DT_ALIAS_LED\1_GPIOS_FLAGS/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We use the following commands to rename any
SW._GPIO_{CONTROLLER,PIN,FLAGS} to
DT_ALIAS_SW._GPIOS_{CONTROLLER,PIN,FLAGS}
git grep -l SW._GPIO_CONTROLLER | xargs sed -i 's/SW\(.\)_GPIO_CONTROLLER/DT_ALIAS_SW\1_GPIOS_CONTROLLER/g'
git grep -l SW._GPIO_PIN | xargs sed -i 's/SW\(.\)_GPIO_PIN/DT_ALIAS_SW\1_GPIOS_PIN/g'
git grep -l SW._GPIO_FLAGS | xargs sed -i 's/SW\(.\)_GPIO_FLAGS/DT_ALIAS_SW\1_GPIOS_FLAGS/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move ring_buffer.h to sys/ring_buffer.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move uart.h to drivers/uart.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move gpio.h to drivers/gpio.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move fs.h to fs/fs.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
USBD_CFG_DATA_DEFINE macro has not consider that a class
could have more than one set of usb_cfg_data struct.
If a class has more than one set of usb_cfg_data
then they should be sorted the same way like by
USBD_DEVICE_DESCR_DEFINE macro.
Fixes: #16240
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This patch removes the "hard" selection of the USB_DEVICE_REMOTE_WAKEUP
Kconfig option for USB devices made on the nRF52840 SoC. Now it's up to
the application to decide if it wants to enable the option. This change
makes it possible to pass the USB3CV Chapter 9 Tests for applications
that don't use the remote wakeup feature, since when a USB device only
reports that it supports this feature, and the mentioned option makes
it to do so, one of the test cases expects the USB device to actually
perform the remote wakeup. And when the feature is not reported as
supported, the test case is skipped.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This sample has to be operated manually (it's a USB DFU implementation
that needs to be plugged into a host to validate). Sanitycheck is
failing right now becuase it tries to flash and run it, and doesn't
see a harness declaration.
Set it to build_only when run under sanitycheck.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Fix misspellings and doc issues missed during regular reviews (including
some files without a trailing newline)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Cleanup references to boards in some of the example and use the same
boards through the examples. Other minot cleanups and make the text more
generic and not specific to certain boards.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It does make sense to initialize USB console after USB Device stack.
Note that the value is selected only if we specify USB_UART_CONSOLE
in prj.conf, not in menuconfig afterwards.
Fixes#16518
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove duplicated execution path for composite configuration, USB
device stack initialization is done inside stack for both cases.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In order to unify the legacy and composite code, move the class and
vendor request handler buffer into the USB device code, just like in
composite mode. The option is renamed from USB_COMPOSITE_BUFFER_SIZE
into USB_REQUEST_BUFFER_SIZE and also replaces the USB_DFU_MAX_XFER_SIZE
and USB_HID_MAX_PAYLOAD_SIZE options.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Added .inf driver file for Windows.
CDC examples will now work on Windows.
Note:
This .inf is not signed and may cause problems during installation.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Unique PID is required for each sample in order
to be recognized by host.
When creating a new sample:
- Add USB_PID_<SAMPLE_NAME>_SAMPLE
in samples/subsys/usb/usb_pid.Kconfig
- Create Kconfig file in your sample's subdirectory, containing:
config USB_DEVICE_PID
default USB_PID_<SAMPLE_NAME>_SAMPLE
source "Kconfig.zephyr"
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Adds required Kconfig options for flash driver.
Adds FatFS filesystem for flash disk.
Fixes#14459.
Note: As USB MSC does not support multiple disks (see #14937),
only one (flash by default, modify CONFIG_MASS_STORAGE_DISK_NAME
to "RAM" for RAM disk) will appear to host.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
To support mass storage over USB in RAM we need a board with
sufficient RAM. Fix failing tests for boards with low memory.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Enable harness so we can execute smoke tests on the hardware with
command line:
sanitycheck --device-testing --device-serial /dev/ttyACM0 -p <BOARD>
-T samples/subsys/usb/hid
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add config overlay for cdc_acm+dfu composite configuration.
Manual configuration over menuconfig may be error-prone for
the user because then FLASH_LOAD_OFFSET and FLASH_LOAD_SIZE
should also to be set to appropriate values.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
