The `start_udp_and_tcp` funcion is a blocking function, therefore it
should not be called from the system workqueue, as it would stall it.
Because it was called in such a way, the retry mechanism, which
also relied on the system workqueue did not work properly.
This commit fixes the issue, by keeping the main application processing
in the main thread, and using a semaphore to synchronize with the
connection manager.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Remove old configurations of boards that do not support networking
natively and very custom and difficult to test.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Start to monitor Connected and Disconnect events and then start
and stop the echo service according to system connectivity status.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Converts all net samples that enable the mcr20a 802.15.4 driver to use
the frdm_cr20a shield instead of hardcoding configs for the frdm_k64f
base board. This makes it possible to build mcr20a samples for other
base boards with compatible arduino headers.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Clean up some stray references to cmake in doc, boards and
samples that don't make explicit use of the zephyr app extension,
as well as other minor doc fixes.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The DT spec. only has "okay" and not "ok". The Linux kernel has around
12k "okay"s and 300 "ok"s.
The scripts/dts scripts only check for "disabled", so should be safe re.
those at least.
The replacement was done with
git ls-files | xargs sed -i 's/status\s*=\s*"ok"/status = "okay"/'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
`CONFIG_NET_L2_BT` no longer forces required BT configuration, but
depends on a user to set a valid configuration instead. Hence, we
need to select a proper configuration in the overlay config file.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This patch adds the overlay when the echo-server is running on Linux and
echo-client is running on Qemu.
Fix: #14654
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
A new role :zephyr_file: is available that renders to a link to the file
or folder in GitHub. Find appropriate references using :file: and
convert to :zephyr_file: to take advantage of its linking capability.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
CONFIG_IEEE802154_CC2520_AUTO_ACK seems to creep back in, but has long
since be removed. We remove old references a few times.
Commit 2facf33f28 - "net: ieee802154: Remove old cc2520 AUTO_ACK
assignments".
Remove them again.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Port all users of 'set_conf_file' to use the built-in rules
instead. This follows the convention-over-configuration principle to
make the system as a whole simpler and more consistent.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Added more detailed information how to connect Zephyr instance
to host system like Linux desktop.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net-app based echo-server/client applications were used for
various smoke testing purposes. As those two apps are now removed
we need to introduce the same support into sockets based echo-client
and echo-server applications.
Fixes#13300#13481
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the net-app based echo samples are being removed, there's no use
referencing them any longer in their socket counterparts.
Additionally, overlay configuration descriptions were added in the
same manner original samples did.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
These were still running through Ethernet using generic
overlay-802154.conf thus creating a dedicated one.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Increase rx stack size for OpenThread overlay, as updated revision of
OpenThread requires more stack to operate.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Current application data size in echo_client sample does not fit into a
single datagram with DTLS enbled for default IPv6 MTU (1280 bytes). This
caused abrupt failure of the sample with DTLS enabled over 802.15.4 L2.
Decreasing the application data size allows it to fit into a single UDP
datagram after encapsulating it into DTLS record.
Additionally, finetune DTLS timeout on echo_server to match UDP
application timeout on echo_client (so that a single datagram loss
does not cauase DTLS session to end).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Use generic logging macros LOG_*() instead of NET_*() as the
latter are mostly meant for internal networking stack use.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove network specific default and max log level setting
and start to use the zephyr logging values for those.
Remove LOG_MODULE_REGISTER() from net_core.h and place the
calls into .c files. This is done in order to avoid weird
compiler errors in some cases and to make the code look similar
as other subsystems.
Fixes#11343Fixes#11659
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add Bluetooth, 802.15.4 and OpenThread overlay configurations to socket
echo_client and echo_server samples.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In order to prevent failing tests on i.MX RT the following samples were
limited to a minimum 140k of flash: http_client, http_server,
socket/echo_client and sockets/echo_server.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
The $srctree environment variable gives the path relative to which
'(o)source' statements work (the current directory is used if $srctree
is unset). It is set to $ZEPHYR_BASE in cmake/kconfig.cmake, so there's
no need to qualify the source of Kconfig.zephyr in sample Kconfig files
(or in external projects).
All 'source's in Zephyr assume that the Zephyr root directory is used as
the srctree as well, and would break otherwise.
Remove the $(ZEPHYR_BASE)s to make it clearer that all 'source'
statements work relative to the Zephyr root. There was some user
confusion on IRC.
Also explain how things work in the documentation.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
With recent changes, sockets no longer depend on Newlib libc, so
let's have actual samples which demonstrate this. echo_client/
echo_server, which were ported from net_app samples, are converted.
The rest of socket samples are intended to be buildable on a
POSIX system (e.g. Linux), so they rather stay with more
full-fledged libc.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Avoid having not-necessarily board specific configs in a separate file.
Instead, have a single project file with appropriate overlay configs.
Board specific configurations can be added in future if needed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It is no longer necessary to set the KCONFIG_ROOT variable when the
KConfig file is in the application root directory.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add support for VLANs which are disabled by default.
The application can be configured to use the VLANs by setting
the IP addresses properly in config file. The VLAN support in
this sample application is only meant for testing multiple network
interface handling.
The application can be compiled like this for VLAN support:
cmake -DBOARD=qemu_x86 -DOVERLAY_CONFIG=overlay-vlan.conf ..
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Per: http://pubs.opengroup.org/onlinepubs/009695399/functions/socket.html
"Upon successful completion, socket() shall return a non-negative
integer, the socket file descriptor."
The test in prepare_fds() however fails if socket fd is
zero (non-negative), which should be a valid value.
This was found while testing the SimpleLink socket offload driver,
which can return a zero-valued socket fd, per the POSIX spec.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This finishes refactor of splitting off net_config library name from
net_app library, started in c60df1311, c89a06dbc. This commit makes
sure that Kconfig options are prefixed with CONFIG_NET_CONFIG_
instead of CONFIG_NET_APP_, and propagates these changes thru the
app configs in the tree.
Also, minor dependency, etc. tweaks are made.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add DTLS support to socket echo_client and echo_server samples.
Additionally, move TLS-related configs to overlay-tls.conf config file,
to align with other examples.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit adds TLS support to socket echo_client/echo_server samples.
Credentials used are the same as in the non-socket versions of these
samples, therefore they can be easily tested with net-tools utils.
Maximum payload size for the client was sligtly reduced to fit the
encrypted data within 1280 bytes.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
