The `start_udp_and_tcp` funcion is a blocking function, therefore it
should not be called from the system workqueue, as it would stall it.
Because it was called in such a way, the retry mechanism, which
also relied on the system workqueue did not work properly.
This commit fixes the issue, by keeping the main application processing
in the main thread, and using a semaphore to synchronize with the
connection manager.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Remove old configurations of boards that do not support networking
natively and very custom and difficult to test.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Start to monitor Connected and Disconnect events and then start
and stop the echo service according to system connectivity status.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Converts all net samples that enable the mcr20a 802.15.4 driver to use
the frdm_cr20a shield instead of hardcoding configs for the frdm_k64f
base board. This makes it possible to build mcr20a samples for other
base boards with compatible arduino headers.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
If user has set CONFIG_NET_CONTEXT_TIMESTAMP then enable
network packet throughput collection for UDP packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print IP address for added or removed IP address. This helps
to understand what IP address is being removed or added.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is done only for testing purposes, in real life the socket
would be closed if it is not used or needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Clean up some stray references to cmake in doc, boards and
samples that don't make explicit use of the zephyr app extension,
as well as other minor doc fixes.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The DT spec. only has "okay" and not "ok". The Linux kernel has around
12k "okay"s and 300 "ok"s.
The scripts/dts scripts only check for "disabled", so should be safe re.
those at least.
The replacement was done with
git ls-files | xargs sed -i 's/status\s*=\s*"ok"/status = "okay"/'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
We are not interested in whether the close() call succeeds or
not when the connection is terminated.
Coverity-CID: 198878
Fixes#16569
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
sntp_request() was deprecated and superceded by sntp_query(), which
provides better time resolution.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The approved trademark name is Wi-Fi so update references to WiFi and
other spellings to Wi-Fi in documentation and Kconfig help strings.
(Note that use of spelling variatios of "wifi" in module names, CONFIG
names, link names and such are untouched.)
https://www.wi-fi.org/
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
1. Output what steps the app performs, so it doesn't look to user
that it simply hanged.
2. Don't use infinite timeouts, because that will hang.
3. Clearly note which requests are for IPv4 vs IPv6 server.
4. Define IPv4 gateway. This sample is configured to run against
SNTP on local Linux host, but standard distros (e.g. Ubuntu) don't
run SNTP server by default, so usual outcome for running this sample
will be timeout. A realistic way to get successful output would be
to run it against a server on the Internet, for what a gateway is
required.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The function net_pkt_get_info() is found in net_pkt.h and not
in buf.h. This caused
"implicit declaration of function ‘net_pkt_get_info’"
warning if CONFIG_NET_BUF_POOL_USAGE was enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Migrate from "legacy" PCI support (drivers/pci) to new PCI(e) support.
The e1000 driver is merely for testing with QEMU and so should not be
a model for the use of PCI(e) functions. Consult instead "real-world"
PCI(e) drivers like the NS16550 UART (drivers/serial/uart_ns16550.c).
Signed-off-by: Charles Youse <charles.youse@intel.com>
In this commit, a config.h header file is added to support the case
when the NET_CONFIG_SETTINGS is not used. main.c is also modified to
enable platforms that do not support IPv6. These changes are necessary
in order to allow cc3220sf_launchxl support.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add qemu ethernet driver overlays for big_http_download and
dumb_http_server samples, which are default integration samples/
tests for TCP stack. This change follows up after similar addition
of such overlays to other samples (and smsc911x overlay addition
to these samples).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Changing the example to not use IPv6 when it is not configured,
given IPv6 is not enabled on some platforms such as cc3220sf_launchxl.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
`CONFIG_NET_L2_BT` no longer forces required BT configuration, but
depends on a user to set a valid configuration instead. Hence, we
need to select a proper configuration in the overlay config file.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This patch adds the overlay when the echo-server is running on Linux and
echo-client is running on Qemu.
Fix: #14654
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Linking to API material requires knowing the pecularities of how
doxygen, sphinx, and breathe work. In an attempt to hide some of this
we're preparing the current docs to allow use of configuration defaults
that will let us more simply use a default role that will hunt for a
reference target in the various domains that are available by using a
default "role" of "all". This will let us use the simple notation
`functionname` or `typename` without fully specifying the reference as
:c:func:`functionname`.
This patch cleans up exising docs that were (incorrectly) using single
backtics where double backtics should have been used, and also found
some typos (such as a space between the role name and the reference,
such as :file: `filename`, and a missing colon such as
c:func:`functionname`)
This is a start to address issue #14313
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The CANBUS sockets require "struct can_frame" to be used in order to be
compatible with Linux code.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The CANBUS sockets require can_filter to be used in order to be
compatible with Linux code.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch checks the return values of setsockopt.
Fixes: #14392, #14402
Coverity-CID: 195897, 195848
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Patch (3206568e43) changed network
interface numbering starts from 1. The index 0 is reserved.
So use api to get default interface index for packet socket sample.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
A new role :zephyr_file: is available that renders to a link to the file
or folder in GitHub. Find appropriate references using :file: and
convert to :zephyr_file: to take advantage of its linking capability.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
CONFIG_IEEE802154_CC2520_AUTO_ACK seems to creep back in, but has long
since be removed. We remove old references a few times.
Commit 2facf33f28 - "net: ieee802154: Remove old cc2520 AUTO_ACK
assignments".
Remove them again.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
