Add a kernel timer driver for the MEC1501 32KHz RTOS timer.
This timer is a count down 32-bit counter clocked at a fixed
32768 Hz. It features one-shot, auto-reload, and halt count down
while the Cortex-M is halted by JTAG/SWD. This driver is based
on the new Intel local APIC driver. The driver was tuned for
accuracy at small sleep values. Added a work-around for RTOS
timer restart issue. RTOS timer driver requires board ticks per
second to be 32768 if tickless operation is configured.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
This was always intended to be a bytestring rather than an array, but
full support was missing. Since that has been addressed switch it to
the preferred format.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The JEDEC API defines the hardware page, sector, and block sizes.
Deprecate the Kconfig settings, remove the `erase-size-block` property,
and add `has-be32k` to indicate that 32K-byte erase is supported.
Rework the driver to use the constants instead of configured values.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Same deal as in commit eba81c6e54 ("yaml: Remove redundant document
separators"), for some newly added stuff.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
No binding has anything but 'version: 0.1', and the code in scripts/dts/
never does anything with it except print a warning if it isn't there.
It's undocumented what it means.
I suspect it's overkill if it's meant to be the binding format version.
If we'd need to tell different versions from each other, we could change
some other minor thing in the format, and it probably won't be needed.
Remove the 'version' fields from the bindings and the warning from the
scripts/dts/ scripts.
The new device tree script will give an error when unknown fields appear
in bindings.
The deletion was done with
git ls-files 'dts/bindings/*.yaml' | xargs sed -i '/^\s*version: /d'
Some blank lines at the beginning of bindings were removed as well.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In most of the cases the fixed-clock node is not referenced by the
Zephyr code, making the label property just a burden.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
I'm guessing STM32 GPIO nodes don't generate interrupts, because I can't
find any device tree nodes with 'compatible = "st,stm32-gpio"' and an
'interrupts' property.
Remove the required 'interrupts' property from the binding. This fixes a
bunch of errors in
https://github.com/zephyrproject-rtos/zephyr/issues/17532.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The port_sel property had the category set to 'define' which isn't a
valid option. Change it to be 'required'.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit makes the clock property optional (through base.yaml),
as clock reference is not used in the code.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit adds a DTCM (Device Tightly Coupled Memory) section for
Cortex F7 MCUs. The Address and length is defined in the corresponding
device tree file.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Since the nxp,imx-gpio binding is shared between i.MX and i.MX-RT SoC
the 'rdc' property needs to be optional (as it doesn't make sense on the
RT SoCs).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We've removed the need for the 'generation:' property in the binding
files. Remove use in st,stm32-usb.yaml.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A number of dts bindings mark 'interrupts' as a required property when
in fact they are not for those devices. Remove the 'required' setting
and just have 'interrupts' as 'optional'.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The dts that have intel,qmsi-watchdog don't sent a clock property so its
not required. Change it from being required to optional.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds a fixed clock node (representing clock driving
system bus). The added node is then referenced by peripherals requiring
information about driving clock frequency.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
These bindings override the 'category: optional' for 'clocks' from
uart.yaml with 'category: required', but none of the nodes that use the
bindings set 'clocks'.
Maybe it's a copy-paste error. Remove the 'clock' overrides.
Fixes some errors in
https://github.com/zephyrproject-rtos/zephyr/issues/17532.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These bindings !include adc.yaml, but their device tree nodes never set
'clocks':
dts/bindings/iio/adc/atmel,sam-afec.yaml
dts/bindings/iio/adc/atmel,sam0-adc.yaml
dts/bindings/iio/adc/nordic,nrf-adc.yaml
dts/bindings/iio/adc/nordic,nrf-saadc.yaml
The nodes for these bindings do set it (think it's consistent for
st,stm32-adc.yaml):
dts/bindings/iio/adc/nxp,kinetis-adc12.yaml
dts/bindings/iio/adc/st,stm32-adc.yaml
Make 'clocks' optional in adc.yaml. Maybe it should be changed to
required on some platforms (!including bindings can change 'optional' to
'required').
Fixes a bunch of errors in
https://github.com/zephyrproject-rtos/zephyr/issues/17532.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Setting it seems rare. Maybe it could be changed to required on just
some platforms (!including bindings can change 'optional' to
'required').
Fixes a bunch of errors in
https://github.com/zephyrproject-rtos/zephyr/issues/17532.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
None of the interrupt controller nodes that use this binding in the
device tree files set 'reg' (or have a unit address).
Fixes a bunch of errors in
https://github.com/zephyrproject-rtos/zephyr/issues/17532.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This patch populates "clocks" property in stm32 usb nodes
for clock related usb configuration code of each dtsi files
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The st,stm32-can binding specified several required properties that were
never set in actual .dts files and not used by the code. Remove them at
this time since they aren't being used.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We removed support for cell_string some time ago, so we have some stale
references in a number of bindings that we can remove.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Note that these appear as
properties: {erase,write}-block-size: label: ...
rather than as
properties: label: ...
I can't see anything looking at 'label' for individual properties in
bindings, so it's probably dead code. Labels are fetched from the device
tree in extract/flash.py.
Piggyback removal of some 'generation: define's and a redundant pair of
YAML document separators.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
We define "arc,num-irq-priority-bits" and "intel,num-irq-priority-bits"
as required properties in the bindings for the interrupt controllers
however we never specify these properties in any .dts files or use them
in any code.
Remove them as stale properties in the binding files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that the generation script doesn't look at the "generation" in the
YAML, we can remove it from the binding files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
uint8-array is the name for what the devicetree specification calls a
bytestring.
The original parsing code treated square brackets as equivalent to
quotes or angle brackets, failing to interpret elements as hex-encoded.
This was a bug, corrected in this patch by processing content as a
sequence of hex-encoded bytes with arbitrary whitespace.
The original generating code emitted the property as individual
elements. Replace that with generation of a single structure
initializer, which is more useful in cases where the length of a
property value may vary between nodes.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
1) dts/bindings/mmc/mmc.yaml: specifies common mmc.
2) dts/bindings/mmc/nxp,imx-usdhc.yaml: specifies
nxp usdhc module which inherits mmc.
3) dts/arm/nxp/nxp_rt.dtsi: usdhc support on RT chip.
4) boards/arm/mimxrt1050_evk/mimxrt1050_evk.dts:
usdhc slot support on mimxrt1050_evk board.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
A number of minor issues with the 'fixed-clock' support:
* Fix the #clock-cells to be 0
* Fix nxp_ke1xf.dtsi to set #clock-cells 0 and the clock reference to
only be a phandle.
* Fix the generation script to only generate what it should for a
'fixed-clock'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A few clock bindings only have a single clock cell defined, but the
binding described more than one cell.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add flash support for STM32G0X SoC series.
Signed-off-by: Philippe Retornaz <philippe@shapescale.com
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add support to STM LSM6DSO 6-axis IMU sensor driver.
This driver supports communication with device though both
I2C and SPI bus and both polling and drdy trigger mode.
This driver supports also the sensorhub mode with the possibility
to connect a maximum of two external devices, typically a
magnetometer and an environmental sensor, currently selected among
following devices: lis2mdl magnetometer, lps22hh or lps22hb
pressure and temperature sensors, HTS221 humidity sensor.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
