Fix missing ISO Synchronized Receiver radio event time
reservation that did not calculate for all the subevents.
Introduce BT_CTLR_SYNC_ISO_RESERVE_MAX Kconfig option to
allow using a minimal time reservation if needed to allow
other role to pre-empt ISO Synchronized Receiver in
pre-transmission and control subevents.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for DYNAMIC_INTERRUPTS and ARM specific
DYNAMIC_DIRECT_INTERRUPTS.
Co-authored-by: Radosław Koppel <radoslaw.koppel@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ull_prepare_dequeue to not skip events when preempt
does not match the event in the head of the prepare queue.
The head of the prepare queue does not match when
ull_prepare_dequeue has put the head of the queue to the
last of the queue when it is calling lll_resume interface.
This happens when there is already an active event which
needs a preempt timeout to be setup and there is another
non-resume event in the pipeline which now becomes the
head. The fix ensure to restore the order of the events
if a preempt timeout was to be setup.
Currently ull_prepare_dequeue loops through all events
before stopping at the original way the queue was. This is
not efficient and is a scope for improvement in future.
This reverts commit 91781306e9 ("Revert "Bluetooth:
Controller: Fix ull_prepare_dequeue for skipped events"").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add functions to do XOR on arrays of memory, with one that
takes arbitrary sizes and one for 32 bits and 128 bits as
those are common sizes for this functionality.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If an instant based remote procedure 'overtakes' a local ditto
the local procedure will be 'completed' by remote rejection
but collision flag would not get set ensuring that a new local
conflicting procedure cannot be started before the remote is completed.
This can thus lead to invalid local initiation.
Added unittest to cover case
Fix by ensuring collision flag is set also in the above mentioned
scenario.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Revert back to implementation that did early abort of
previous prepare when a short prepare is enqueued.
Adds back implementation deleted in
commit 7f388bb70a ("Bluetooth: Controller: Fix short
prepare when many enqueued in pipeline").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Minor refactor of Kconfig order such that the advanced
feature Kconfig is just above the enabling/visible of the
advanced features menu.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to reduce CIG's CIS retransmissions so as
to meet the Host requested Maximum Transport Latency.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixes failing EBQ test LL/DDI/SCN/BV-88-C Extended Scanning,
Active, Properly Ignore RFU Fields
Several minor modifications made to le_ext_adv_report() to
properly ignore any invalid fields present in the received PDUs
Signed-off-by: Troels Nilsson <trnn@demant.com>
radio_pkt_big_ctrl_get() returns a statically allocated
buffer of type pdu_big_ctrl, but the callers expect a
buffer where a whole PDU for a BIG control packet can fit
(not just space for the payload),
and use it as such, overflowing this statically
allocated buffer, and smashing other variables after.
Let's fix it by allocating a buffer of the correct size
to fit a BIG control PDU.
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/64497
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
With very fast HCI interfaces (for ex. in the simulated nrf5340)
the tx_rate calculation can do a division by 0
(if to packets are enqueued in the same 32KHz clock period).
Let's avoid it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix missing Extended Advertising terminate event and
advertising scheduling not being stopped.
Under race conditions, auxiliary event is aborted without
the generation of done extra event which is suppose to
stop the scheduling when max events count is used.
The fix now generates the done extra event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix periodic advertising sync window calculation to include
the scheduling resolution margin, i.e. be double as with
the event jitter value.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix bitfield crossing byte boundary - replaced with macros for
setting/getting the values
Fix missing endianness conversion for evt_cntr
Changed aa from uint32_t to uint8_t[4] to align with the rest of
the code and avoid any potential endianness issues
Signed-off-by: Troels Nilsson <trnn@demant.com>
BT_CTLR_ISOAL_LOG_DBG_VERBOSE, BT_CTLR_ISO_TX_SEG_PLAYLOAD_MIN, and
BT_CTLR_CONN_ISO_AVOID_SEGMENTATION are very tied to the BT_LL_SW_SPLIT
implementation. It is very unlikely that these will ever be used by
another controller
Therefore move them out to the BT_LL_SW_SPLIT specific configuration
file. This will likely create less confusion when using another
controller.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Fix hung Controller when establishing CIS on an encrypted
ACL connection with Controller built with direction finding
support enabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The existing formula for the amount of data that can be filled
in in the current PDU is correct but confusing. Replace it with
a simpler formula.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Updates the chaining for advertising.
Instead of unconditionally adding a new PDU when new data
is added we now instead fill the last PDU in the chain with
the incoming data, only adding a new PDU when there is
not enough room.
This reduces the nr. of PDUs used for advertising, and also
fixes some qualification failures
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Fix leak in scheduled ticker node when rescheduling ticker
nodes.
Applications having active Extended Advertising or Observer
role with the use of ticker reschedule in window feature
would experience assertion check failure due to delayed
radio event preparation or stalled controller with no active
roles.
Fix updating of the ticker linked list when handling
rescheduled tickers.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When the legacy LLCP implementation was removed this Kconfig option was
mistakenly left over. Remove it now with all its users.
Fixes#63212.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Make the aa argument const to solve a Coverity issue
that assumes that any value that is being byteswapped
is tainted. Making the argument const should avoid
this assumption from Coverity.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix the coverity issue CWE570, comparison of unsigned int to 0
in the definition of IS_SYNC_ISO_HANDLE
There is a potentially the same issue for IS_ADV_ISO_HANDLE,
fixed that as well
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
In ll_setup_iso_path cis is only ever set if CONFIG_BT_CTLR_CONN_ISO
is enabled, and similarly adv_stream is only ever set if
CONFIG_BT_CTLR_ADV_ISO is enabled.
The two assignments were reported as dead code by Coverity due
to this, which has been fixed by guarding the code with
the respective Kconfigs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove the terminate_ack from struct ll_conn since it is
not used anywhere, and results in dead code.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix number of completed packets generated when BIS HCI ISO
Data packets sent to Controller are in fragments. Use the
ISOAL stored sdu_fragment count to generate the number of
completed packets count.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Kconfig option to turn off ISO Data Packet Sequence Number
use to place the ISO Data in the correct radio event,
instead simply buffer it to next radio event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ISO data timestamp to reflect the SDU reference point
and not the ISO event anchor point when PDUs received after
retransmissions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use of payload_count for supporting flush timeout in
Central and Peripheral ISO Lower Link Layer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix a clang warning
ull.c:1235: warning: use of bitwise '|' with boolean operands
The result of ({1/0} &&(int)) is either true(1) or false(0),
not the int and therefore bm is not a bitmask, but just true(1)
or false(0) all together.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For asymetrical features there needs to be a separate mechanism to
unmask features in peer. This must be used in central for unmasking in case
of 'unsupported in peer' condition for CIS Create.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
If a CIS create is requested prior to having a complete feature exchange
the central will initiate a feat exch before enqueing the CIS create.
IF then the feature exchange results in peripheral NOT supporting
CIS create the central needs to allocate an RX node for the NTF
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Fix ULL_HIGH ticker operations count, it is discovered in
new BabbleSim test implementations that mesh tests using
Extended Advertising and Scanning enqueue upto 4 ticker
operations before ULL_LOW ticker_job could process it.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
