This commits adds the LE API's for the LE Power Control Request Feature
in Zephyr.
The support of feature is provided with the controller-based feature
selection with BT_CTLR_LE_POWER_CONTROL_SUPPORT and is selectable via
BT_TRANSMIT_POWER_CONTROL.
With the new APIs, the applications will:
get improved reading of local and remote tx power
be aware of changes in remote or local tx power
Defined HCI commands in Core Spec v5.4:
7.8.117 LE Enhanced Read Transmit Power Level command:
improvement to existing local tx power reading.
7.8.118 LE Read Remote Transmit Power Level command:
Remote tx power is read through an event (LE Transmit Power Reporting)
7.8.121 LE Set Transmit Power Reporting Enable command:
Enables local or remote tx power reporting to monitor changes in tx power
7.7.65.33 LE Transmit Power Reporting event
Note: to utilize the Feature fully Nordic-LL-only vendor-specific commands
are needed. These will not be added in RTOS zephyr but instead
implemented in a maintainable way in sdk.
Signed-off-by: Kyra Lengfeld <kyra.lengfeld@nordicsemi.no>
The PAST sender needs to support periodic advertising
and the PAST receiver needs to support periodic advertising
sync.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move all Kconfig symbols related to Bluetooth logging into the newly
created `Kconfig.logging`. The logging symbols are now grouped by into a
menu "Bluetooth logging". Closely related symbols are grouped with each
others. For example, audio related logging symbol are found behind a
submenu "Audio" inside the "Bluetooth logging".
The deprecated logging symbols have also been moved in a submenu of
"Bluetooth logging", it's easier to avoid them so.
Behavior of the Bluetooth logging system:
When `LOG` symbol is selected, if Bluetooth is enabled (`BT` symbol
selected), the Bluetooth logging is enabled.
If the user does not set any log level, the Bluetooth logging symbols
will inherit the log level of `BT_LOG_LEVEL`. If the user does not set
the level of `BT_LOG_LEVEL`, the default log level will be the one
defined by the logging subsystem. Which currently is `LOG_LEVEL_INF`.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Create a new Bluetooth library and add Encrypted Advertising Data to it.
Encrypted Advertising Data is a new feature from the Bluetooth Core
Specification 5.4. It provides a way to communicate encrypted data in
advertising, scan response and EIR packets. To do that it introduce a
new advertising data type called `Encrypted Advertising Data`. Also, it
introduce a new characteristic called `Encrypted Data Key Material`,
this provides a way to share the key material.
The library add two main functions `bt_ead_encrypt` and
`bt_ead_decrypt`.
Two helper functions are added to `bluetooth.h`. `bt_data_get_len` and
`bt_data_serialize`, the first one allow the user to get the total size
of a set of `bt_data` structures; the second one generate a spec
compliant bytes array from a `bt_data` structure. The last one is useful
because `bt_ead_encrypt` take as input those kind of bytes array.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
After merging #51809, a few things were spotted that needed tweaking.
Among them:
- Rename the folder from bt_crypto to crypto, since the prefix is
unnecesary
- Remove the include folder
- Remove the path from the global include paths
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Move functions defined in the Cryptographic toolbox of the Bluetooth
specification inside their own files in the following folder:
`zephyr/subsys/bluetooth/bt_crypto`. The functions were previously
implemented in `zephyr/subsys/bluetooth/host/smp.c`.
The cryptographic toolbox functions can now be accessed from outside of the
host.
In addition to that, tests for each cryptographic toolbox functions have
been added.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
When performing a combined host and controller build, there is no point
in presenting the option to enable a given host feature if the
controller does not support it. This reduces the list of presented
features to enable/disable.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Increase the supported maximum simultaneous connection to
250, tested under BabbleSim simulations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This prevents GATT service selection being selectable when compiling
controller only builds.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add new Kconfig BT_CONN_TX which is true if the ACL and
ISO configuration allows for sending data. This is mainly
used to avoid initialization of the tx_complete_work
for ISO sync receiver only builds.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Extracted new Kconfig file for the Extended Advertising
and for the Bluetooth Isochronous Channel from the
Bluetooth subsystem Kconfig.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
Update the connected ISO API to be more
similar to the broadcast ISO API as well
as the HCI spec.
This updated API allows for more flexibility
and will better support scenarios such as true
wireless setup, as ISO channels and connections
are more independent now.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In limited advertising advertising should end after certain timeout.
Previously, limited advertising was just general advertising with
BT_LE_AD_LIMITED flag set. Now, if this flag is set the work is
scheduled, that will disable advertising after timeout.
This affects tests GAP/DISC/LIMM/BV-03-C and GAP/DISC/LIMM/BV-04-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Because we use the extended kconfig, we have already
supported relative paths, and it is clearer to use
relative paths in the bluetooth submodules.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Add a new Kconfig option, BT_ISO_UNICAST, to make it possible
either configure unicast only, broadcast only or both.
This results in some code being moved, but not modified, and
should not effect anything.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added initial support for BIS (broadcast ISO stream), which
adds support for creating BISes as both broadcaster and receiver,
as well as managing and creating BIGs.
Extends PA sync to handle BIGInfo adveritising reports.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
It was decided that the Bluetooth audio subsystem should
be in subsys/bluetooth/audio instead of subsys/bluetooth/host/audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
ISO is a building block for BT_AUDIO but it is not only
useful for AUDIO, and as such should be possible to
enable without enabling BT_AUDIO.
This commit moves iso.c and iso_internal.h to the
host directory (from host/audio) and removes
the CMakeLists.txt.
The /audio directory is left intact for the Kconfig options
it provides, and as a directory for future BLE Audio
content.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit moves the BT_ISO to a common (host and controller)
Kconfig and fixes the ISO buffers in hci_raw.c
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The BT code uses co-op thread priorities to implement some
critical sections. This won't work with SMP turned on.
Express this in our configuration ontology, so that it's
not possible for the end user to set up the system in this
way and get crashes or odd behavior.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Added support for syncing to periodic advetisements.
The API and usage is heavily inspired by the extended advertisement
and connection APIs.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Added API to set periodic adv parameters, periodic adv data
and to enable/disable periodic advertisement.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
The bluetooth subsystem is now fully compatible with the new timeout
API, so remove the selection of the legacy API.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add support for multiple advertising set. Move the advertising state
flags to be per advertising set and loop over advertising sets instead
of looking up legacy advertiser set or handle 0.
Since it is not certain that the advertising set terminated event can
arrive directly after the connection complete event there is currently
a limitation that there can only be one local identity used by
connectable advertisers at a time. This guarantees that we know
the local identity being used in the connection complete event.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This adds support for registering a command extention table which is
used to match incoming commands and then pass the buffer to its
function handler.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds 2 config options which enables hci_raw to work in
H:4 mode and enable it by default automatically.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds USB_PID_BLE_HCI_H4_SAMPLE along with it driver which uses H4
over bulk endpoints.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The net_buf subsystem is now fully compatible with the new timeout
API, so move the selection of the legacy API to those specific
subsystems that use net_buf and still need converting.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add Kconfig options to enable extendend advertising and scanning
support.
Include option to support both types of advertising
commands in case the controller capabilities is not know or the
controller is pluggable.
Include option to only support legacy advertising API, this is to
support the use-case of advertising using different identity than the
scanner or initiator.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The HCI transport implemented by an application using the HCI raw
interface may have its own buffer headroom requirements. Currently the
available headroom gets completely determined by the selected HCI
driver. E.g. most of the time this is the native controller driver
which doesn't reserve any headroom at all.
To cover for the needs of HCI raw users, add a new Kconfig variable
for the apps to set to whatever they need. Correspondingly, use the
maximum of the HCI driver and HCI raw headroom requirements for the
buffer pool definitions and the headroom initializations.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix dependency on the Host to include the PHY update procedure and the
data length update procedure. In a host-only build this feature should
be possible to select without relying on the supported features of the
controller. The host will check support using HCI command to read
attached controller features and commands supported.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The Company ID concept is not restricted to the controller, and should
be part of the wider Bluetooth scope, so it can be used on a
controller-less device. It's used in multiple host level modules, most
notably the Bluetooth Mesh and Device Information Service.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Some Bluetooth options are currently not supported by the experimental
BLE SW LL implementation done on VEGABoard. As such, hide them from
the user altogether.
The full list of disabled config options is as follows:
- CONFIG_BT_PHY_UPDATE
- CONFIG_BT_DATA_LEN_UPDATE
- CONFIG_BT_HCI_VS
- CONFIG_BT_CTLR_LE_ENC
- CONFIG_BT_CTLR_CONN_PARAM_REQ
- CONFIG_BT_CTLR_EXT_REJ_IND
- CONFIG_BT_CTLR_SLAVE_FEAT_REQ
- CONFIG_BT_CTLR_LE_PING
- CONFIG_BT_CTLR_PRIVACY
- CONFIG_BT_CTLR_EXT_SCAN_FP
- CONFIG_BT_CTLR_CHAN_SEL_2
- CONFIG_BT_CTLR_ADV_EXT
- CONFIG_BT_CTLR_XTAL_ADVANCED
- CONFIG_BT_CTLR_SCHED_ADVANCED
- CONFIG_BT_CTLR_TIFS_HW
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Remove the
# Omit prompt to signify a "hidden" option
comments that appear on some symbols. They seem to have been copy-pasted
at random, as there are lots of promptless symbols that don't have them
(that's confusing in itself, because it might give the idea that the
ones with comments are special in some way).
I suspect those comments wouldn't have helped me much if I didn't know
Kconfig either. There's a lot more Kconfig documentation now too, e.g.
https://docs.zephyrproject.org/latest/guides/kconfig/index.html.
Keep some comments that give more information than the symbol having no
prompt.
Also do some minor drive-by cleanup.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The remote version information event needs to be processed by the
prio_recv_thread() thread in order to unblock the Host RX thread
(effectively hci_driver's recv_thread()) when it blocks waiting for a
response to a remote version information.
Add the same time gate the inclusion of the feature behind a new Kconfig
option: CONFIG_BT_REMOTE_INFO.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Convert how we get the various chosen properties like "zephyr,console"
to use the new kconfig functions like dt_chosen_to_label.
Because of how kconfig parses things we define a set of variables of the
form DT_CHOSEN_Z_<PROP> since comma's are parsed as field seperators in
macros.
This conversion allows us to remove code in gen_defines.py for the
following chosen properties:
zephyr,console
zephyr,shell-uart
zephyr,bt-uart
zephyr,uart-pipe
zephyr,bt-mon-uart
zephyr,uart-mcumgr
zephyr,bt-c2h-uart
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We've already got GATT services in subsys/bluetooth/services so
subsys/bluetooth/mesh is a more natural place. Aditionally this aims
to fix the Kconfig dependencies to be able to use mesh together with
BT_CUSTOM (i.e. a custom, potentially non-HCI, host stack).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
