This non-standard feature never had any proper host side implementation
(e.g. it was never upstreamed to BlueZ), and since it comes with notable
maintenance overhead it's fair to just remove it.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Encode the packet type as a H:4 payload prefix for buffers passing to &
from HCI drivers. The existing bt_buf_set/get_type functions are
deprecated, but kept compatible with the change, except that they can only
be called once, since they modify the buffer payload.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
NXP platforms with the LPUART require DMA for the async feature.
Exclude platforms without DMA. Also exclude platforms with DCACHE
since this sample does not place the UART buffers in non-cacheable
memory.
Signed-off-by: Derek Snell <derek.snell@nxp.com>
Enable MQTT 5.0 support in the mqtt_publisher sample and make use
of the topic aliasing feature.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add roundoff to quantization calculation so that precision
is not lost in in edge cases or when quantization error
propagates through model layes.
Signed-off-by: Sayooj K Karun <sayooj@aerlync.com>
The error code `0x80` is replaced with its
corresponding `mqtt_suback_return_code` enum
value. This will make the code more readable, as
users of this example do not have to look up, what
`0x80` encodes.
Signed-off-by: Pályi Lőrinc <palyilorinc33@gmail.com>
Add missing conf and power-domains for adafruit_feather_esp32s2
boards for the BME280 sample
Signed-off-by: Philipp Steiner <philipp.steiner1987@gmail.com>
Add usbd test feature to samd21/samr21_xpro boards.
Add samr21_xpro board to integration_platforms in a few samples.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Have ov7670 and video smartdma use video interfaces binding. With
this, we can fix the chicken-egg issue in init priority and don't need
the workaround anymore.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
The CH32V003 has a straight-forward watchdog that does not support
callbacks. Add an overlay and support.
To make the sample fit in flash, remove the unused logging from the
project configuration. The sample itself doesn't seem to use logging
so this is (mostly) a no-op.
Signed-off-by: Michael Hope <michaelh@juju.nz>
Flexram is really not a memory controller, and does not belong in memc
namespace or directory. Move it to it's own misc directory and remove
memc_ from the namespace.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Moved to: include/zephyr/drivers/misc/flexram/memc_nxp_flexram.h
This change makes it so that the .h file does not need to be pulled in
using the CMakeLists.txt file, and can be included like other public
includes.
Removes drivers/memc/memc_nxp_flexram.h
Add memc_nxp_flexram.h to include/zephyr/drivers/misc/flexram
Modify drivers/memc/memc_nxp_flexram.c to use the new include path.
Modifies the mimxrt1170 magic_addr sample to include the driver using
the new include path.
Modify the soc file: soc/nxp/imxrt/imxrt11xx/soc.c to use the new path.
Add relevant information to migration-guide-4.2.rst.
Signed-off-by: Jacob Wienecke <jacob.wienecke@nxp.com>
Co-authored-by: Declan Snyder <declan.snyder@nxp.com>
Disable GPD for MCUBoot build, as it cannot be
reinitialized later in application (SDFW does not
support reinitialization).
Also, remove the GPD disabling from the mcumgr sample
for nRF54H20 iron board app - it was the reinitialization
that caused problems.
Signed-off-by: Michal Kozikowski <michal.kozikowski@nordicsemi.no>
Enable DHCPv4 when network interface goes up. This makes it easier
to test IP connectivity with DSA.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Current DSA TX/RX way was hard-coded in ethernet devices driver
with ETH_DSA_SUPPORT and NET_DSA.
This patch is to make such way obsolete, as we actually will support
a better DSA framework to handle this in NET/DSA core driver.
To make legacy devices not affected, below options are used instead.
- ETH_DSA_SUPPORT_DEPRECATED
- NET_DSA_DEPRECATED
Once the legacy devices are converted to new DSA framework, this code
could be removed.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Enable `NET_ZPERF_SERVER` for samples that currently enable `NET_ZPERF`
to prevent feature regressions.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Commit e33d9ee4 incorrectly stated that:
> Now that nRF70 by default uses zero-copy fine-tune the configuration
to get optimal memory while getting peak throughputs.
This is incorrect since `NRF_WIFI_ZERO_COPY_TX` is only enabled by
default for the nRF54L series. Update the data heap size so that the
smaller value is only used when `NRF_WIFI_ZERO_COPY_TX` is enabled.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Update iperf version information for use with zperf. Note the fallback
kconfig option for versions older than `2.0.10`, and remove the warning
about `LAST PACKET NOT RECEIVED!!!` since it is not longer present with
the fixed UDP header.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Add stm32n6570_dk conf file in order to increase the amount of
HEAP to ensure k_malloc allocation goes well.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Application can query information about a control given the control id,
the framework fill the rest of the structure. Application can also
enumerate all kinds of device's supported controls by iterating with
VIDEO_CTRL_FLAG_NEXT_CTRL on the same API.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Implement the video control framework with the following features:
- Drivers initialize the control with a valid value range at boot which
guides the application developer and the framework. Hence, the video
framework could do all common works for drivers e.g., sanity check.
- Controls need to be cached to memory. Video framework handles
get_ctrl(), drivers don't need to implement this API. It is because
reading control value directly from registers are not only inefficient
but also sometimes impossible, e.g. controls that scatter through
several registers. Only "volatile" control needs to be updated at
runtime.
- Only the devices (e.g., sensors) owning the controls need to
implement set_ctrl(). Other devices of the pipeline do not need to
propagate set_ctrl() and hence, do not need to implement this API
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
PMCI conveys a stack of specifications from DMTF including MCTP (a
transport layer protocol), PLDM (request/response messaging protocol),
and ancillary SPDM messaging. Placing all these libraries under PMCI
subsystem makes more sense than simply adding MCTP as its own subsystem.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
