This patch updates the config files required to enable the
BLE SW defined controller to be built on RV32M1 SoCs. Only the split
version is supported.
Signed-off-by: George Stefan <george.stefan@nxp.com>
Signed-off-by: Radu Alexe <radu.alexe@nxp.com>
Signed-off-by: Ionut Ursescu <ionut.ursescu@nxp.com>
This commit takes the Nordic LLL and adapts it for RV32M1 SoCs, using
the blocks that are specific to this SoC: the GenFSK & LPTMR IP
blocks.
Signed-off-by: George Stefan <george.stefan@nxp.com>
Signed-off-by: Radu Alexe <radu.alexe@nxp.com>
Signed-off-by: Ionut Ursescu <ionut.ursescu@nxp.com>
This commit adds the HAL layer needed for the BLE controller
LL on RV32M1 SoCs on OpenISA boards. Specifically, the controller
makes use of the the GenFSK and LPTMR IP blocks.
Signed-off-by: George Stefan <george.stefan@nxp.com>
Signed-off-by: Radu Alexe <radu.alexe@nxp.com>
Signed-off-by: Ionut Ursescu <ionut.ursescu@nxp.com>
Having a pin toggle when the code reaches a certain point
is really useful for debugging; the infrastructure is already
in place for Nordic boards, so just build upon and enable the
mechanism on the Vega board as well.
Signed-off-by: David Leach <david.leach@nxp.com>
Update calls to nrfx HAL functions to reflect API changes introduced in
nrfx 2.0.0. All these functions are now called with the first parameter
pointing to the structure of registers of the relevant peripheral.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Fix Data Length Procedure to use Feature Exchange values to
send correct parameters based on whether Coded PHY is
supported by remote peer.
Relates to BT TS.5.1.1 tests:
LL/CON/MAS/BV-129-C
LL/CON/MAS/BV-130-C
LL/CON/SLA/BV-132-C
LL/CON/SLA/BV-133-C
Relates to commit fca32e41e6 ("Bluetooth: controller: Fix
DLE for remote unsupported Coded PHY").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the implementation of slow encryption setup design
alternative to send ENC_RSP PDU before sending REJECT_IND
or REJECT_EXT_IND PDU.
Fixes#19917.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix feature exchange event generation to be correctly
deferred to wait for Rx node availability for cases when
the procedure has already been performed on air.
Without this fix, remote feature request from host may not
get back a HCI event back.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Port missing implementation of the slave latency break
when there is data to be sent to peer master. Without this
initial data send from slave is delay by upto the slave
latency number of connection events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is a port of the commit 4135fb55f1 ("Bluetooth:
controller: Fix rejected enc procedure not terminated") and
commit 4d59ef306b ("Bluetooth: controller: Check if enc
procedure is in progress").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
A single connections may take up to 4 buffers at the same time. Make
number of connections that support this worst-case number
configurable.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Added implementation to cache Data Length Procedure when
another control procedure is in progress.
Relates to commit 26317491e04b ("Bluetooth: controller: Add
data length procedure queueing").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix MIC failure on re-encryption procedure when responding
at the same time to peer initiated feature request.
Relates to commit 560d6ddb964c ("Bluetooth: controller: Fix
Re-encryption procedure").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix dropped ENC_REQ PDU when retransmitting, if slave was
not listening or nack-ed it.
Relates to commit 31256568a283 ("Bluetooth: controller: Fix
ENC_REQ PDU retransmission").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix control tx queue handling to correctly pause control PDU
responses during encryption setup.
Relates to commit 4b4b650174bf ("Bluetooth: controller: Fix
control tx queue handling").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix implementation to correctly cache the control procedures
initiatable by local and peer. And, fix feature exchange and
version information procedures from being disallowed by
having then as cached requests to the controller.
Relates to #15256 and commit 0dcfa3853782 ("Bluetooth:
controller: Fix cmd disallowed and collision disconnects").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix check in start encryption to disallow new encryption
setup while there is one already in progress.
Relates to commit 120eba45f81b ("Bluetooth: controller: Fix
start encryption in progress check").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix a bug where in tx data PDU enqueued, while a ctrl PDU is
deferred due to Encryption setup being in progress, is
leaked causing HCI Tx Buffer Overflow crash.
Relates to commit 671ccc4b0ee6 ("Bluetooth: controller: Fix
data PDU leak during ctrl PDU defer").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix bug in Data Length Update procedure that caused the
connection to drop due to the implementation sending bigger
PDU before the peer has acknowledged the receipt of Length
Response PDU.
Relates to commit ffbbec7a89ca ("Bluetooth: controller: Fix
DLE during data transmission").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
We use the nRFx API nrf_get_irq_number(.) to retrieve the IRQ
line of the CCM peripheral, instead of the hard coded enum
value from MDK. We do this for portability, since these
enums may be different for different nRF SoC series.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix conditional compilation error in building the central
only samples as all peripheral structure member accesses in
the controller where not correctly compiled out.
Regression introduced in commit 6d8b12468e ("Bluetooth:
controller: split: Refactor LLL conn structure").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
We make a minor simplification in the way we define
RADIO_PDU_LEN_MAX in Nordic nRF LE radio driver; as
nRF51 SoC series is the only series where the LL PDU
max length representation is limited to a 5-bit field,
we simplify the conditional preprocessor expression,
to avoid having to list all nRF5x SoCs with PDU LEN
MAX is represented by an 8-bit integer field.
In addition, we modify the preprocessor conditional,
that compiles in the CCM support for 8-bit length field,
PDUs to be an #ifndef CONFIG_SOC_SERIES_NRF51X, instead
of #ifdef CONFIG_SOC_COMPATIBLE_NRF52X; this will
simplify the expression when adding nRF53X series
support.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add the missing initialization of master role terminate_ack
flag. This caused slave initiated remote termination as
procedure timeout.
Fixes#20135.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the LLL connection context to move out the member
fields not accessed in LLL execution context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move calculation of max_tx_octets from Nordic lll_conn.c to ULL, to
allow usage by other vendors and prevent duplicate code.
Signed-off-by: Morten Priess <mtpr@oticon.com>
With sub-microsecond resolution in ticker, it is not necessary to add a
precision margin to the conn_offset. A macro is created to allow setting
the margin to something other than the hard coded 2 * EVENT_JITTER_US.
Signed-off-by: Morten Priess <mtpr@oticon.com>
TX pdu buffers may need to be augmented for fragmentation or other
purpose, depending on vendor LLL implementation. Introduced define to
add extra bytes to TX buffer size, defaulting to 0 if unused.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Remove ifdef guard around inclusion of nrf_clock_control.h in bluetooth
controller as the defines in this header are needed anyway.
Signed-off-by: Solveig Fure <solveig.fure@nordicsemi.no>
Since the LE (Enhanced) Connection Complete that comes as part of
cancelling a connection does not come through the priority rx thread in
hci_driver.c, the event class was not being calculated and cached.
Hence, calculate and cache the class whenever an event is received as
part of invoking a command.
Fixes#20110.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
On connection callback generated by host, application
reading the RSSI value by using HCI LE Read RSSI Command
received -127 dB as the first connection event has not
occured yet in order to measure the RSSI value.
Fix this by using the RSSI value of received advertising
PDU by the initiator, and using the RSSI value of the
received CONNECT_REQ PDU by the connectable advertiser as
the initial value at connection setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
On connection callback generated by host, application
reading the RSSI value by using HCI LE Read RSSI Command
received -127 dB as the first connection event has not
occured yet in order to measure the RSSI value.
Fix this by using the RSSI value of received advertising
PDU by the initiator, and using the RSSI value of the
received CONNECT_REQ PDU by the connectable advertiser as
the initial value at connection setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix connection update procedure to be cacheable if any other
local or remote control procedure is in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
MD bit was set based on whether a memq link's next pointer
being NULL, instead the check should be that the memq has
more elements.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression in porting slave latency, slave latency
enabled was not used, cause slave latency to be applied
before first packet being acknowledged by the master.
Regression in commit 5dff214d57 ("Bluetooth: controller:
split: Fix missing slave latency impl.").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added in commit 1475402d41 ("Bluetooth: controller: Introduce ULL LLL
architecture"), then never used.
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add pre-empt timer stop when a prepare is executed so that
when the pipeline has another event queued, the firing of
the pre-empt timer does not pre-empt the just executed
prepare.
Relates to #19685.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrectly calculated ticks slots for a connection on
connection update. The reservation incorrectly included the
prepare offset.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Data Length Procedure to use Feature Exchange values to
send correct parameters based on whether Coded PHY is
supported by remote peer.
Relates to BT TS.5.1.1 tests:
LL/CON/MAS/BV-129-C
LL/CON/MAS/BV-130-C
LL/CON/SLA/BV-132-C
LL/CON/SLA/BV-133-C
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rx nodes are reserved during control procedures for
generation of HCI event on completion. Fix the allocation
and reservation in the form of a linked list per connection
context. Worst case, this list will hold one rx node for
overlapping non-instant control procedure (Data Length
Update) plus two rx node for control procedure with instant
(PHY update with Data Length Update support).
Fixes#19198.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The remote version information event needs to be processed by the
prio_recv_thread() thread in order to unblock the Host RX thread
(effectively hci_driver's recv_thread()) when it blocks waiting for a
response to a remote version information.
Add the same time gate the inclusion of the feature behind a new Kconfig
option: CONFIG_BT_REMOTE_INFO.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to be able to distinguish between connection-related events
that are generated by the controller and others genrated by LL control
procedures, introduce a new class for LLCP.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Cache the result of calling hci_get_class() to avoid repeatedly invoking
it on the same data. In order to cache it we take advantage of the fact
that both radio_pdu_node_rx_hdr and node_rx_hdr are not packed
structures and they currently have a spare padding byte (between type
and handle).
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Hide the details of obtaining a pointer to the PDU data from a node_rx
structure to simplify the code.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Call LLL reset functions when calling ll_reset to avoid carrying LLL
state across HCI resets. Respective functions already exist in LLL but
had not been called from anywhere.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Fix missing generation of data length update HCI event when
effective tx and rx timings change due to PHY update
procedure.
Fixes BT LL TS 5.1.0 test:
LL/CON/MAS/BV-52-C [Master Receiving Data, LE Coded, CI
Change]
Relates to #17097.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When ULL High and ULL Low are not at same execution priority
level, it is not necessary to disable ULL Low execution when
updating ticker using stop and start. Also, ULL Low need not
be disable inside Radio Events. This commit corrects some of
the conditional compiles.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Kconfig conditional include of Minimum Channels Used
and Channel Selection Algorithm #2.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
