Allow to configure, how long before registration timeout should the
Registration Update be sent. The fixed 6 seconds used so far, might
not be enough in slower networks (like NB-IoT), resulting in frequent
re-registrations at LWM2M level.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
OpenThread API is not thread-safe.
Moved creation of otMessage to the Thread task and created api
for passing it properly.
This way it should be less possible for an issue to occure eg.
during message buffer allocation.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Added automatic strdup for RAM %s parameters. Postponed format
processing to idle time. Automatic parameters counting during
compilation. Very fast execution for up to three parameters.
Signed-off-by: Tomasz Konieczny <tomasz.konieczny@nordicsemi.no>
This is no longer required since drivers implementing the sockets
offload interface were migrated to use pure zsock_ instead of
raw POSIX types and functions.
Signed-off-by: Adam Porter <porter.adam@gmail.com>
With timeout==0 count is set to 0 as well and then it is decremented to
-1. It is later checked == 0 and continues to decrement and loop.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
Under Linux when you shutdown a socket which is blocked on
an accept call the error code returned by accept is EINVAL.
Modify the socket code to be inline with this behaviour.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
When closing a listening socket the functions waiting on the
FIFO will be unblocked this will result in receiving a NULL child
context. If that is the case return an error instead of carrying on.
Return the same error code (EINVAL) that is returned on Linux when
calling shutdown on a blocked accept call.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
In case CoAP packet does not carry payload, and the last option is
zero-length, the option structure was not filled with data (opt number
and length). Fix the length check to prevent this from happening.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This should be boolean according to specification. It makes difference
when JSON encoding is used.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So far net config initialization code relied on number of services
needed by application. This was fine as long as all enabled
services (e.g. CONFIG_NET_IPV4=y, CONFIG_NET_IPV6=y) were selected by
project configuration as "needed" (e.g. CONFIG_NET_CONFIG_NEED_IPV4=y,
CONFIG_NET_CONFIG_NEED_IPV6=y). Problem appeared for example when both
IPv4 and IPv6 were enabled (CONFIG_NET_IPV4=y, CONFIG_NET_IPV6=y), but
only IPv6 was marked as "needed" (CONFIG_NET_CONFIG_NEED_IPV6=y). In
such situation number of required services was equal to 1. When IPv4
setup was completed, this resulted in returning from net_config_init()
function. Application code failed, because IPv6 was still not
functional.
Do not rely on number of services anymore, as it is error prone. Use
flags instead to mark which services are ready. Compare those flags with
the flags passed to net_config_init() (selected in project configuration
in most cases) to decide whether network configuration has completed
already or not.
Also introduce services_notify_ready() and services_are_ready() helper
functions to isolate implementation details from the logic.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
With current design there is single semaphore (called 'waiter') for
wakeing up initialization thread. This thread should then check for
number of protocols that still need to be initialized. This happens now
only when waiting on 'waiter' semaphore times out.
Do not check for k_sem_take(&waiter) return value, as all needed
information about protocols being initialized already is in 'counter'
semaphore.
Fixes: #25358
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
It might happen that while we are waiting for the response
to one of our query, we receive a query to resolve another name.
Previously this would make the current name resolution to fail because
only responses were expected to be received.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
Any CoAP implementation when use at least block transfer or is a server
side need access some CoAP options as integer values. This add a method
at public interface and defines for block wise operations to avoid code
useless code duplication.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The SET_ERRNO() macro does nothing if a positive value is provided
to it, and the functions were not returning -1 or setting errno
as expected.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
APIs were returning -1 without setting errno if the file
descriptor looked up a null object or there was no function
installed in the vtable. Set to EBADF for this case.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Cleansession is hardcoded to 1 but some use case might require 0
to make the sessions persistent (ie get messages sent while the
client was offline)
Signed-off-by: Xavier Naveira <xnaveira@gmail.com>
This PR enables the user to configure the maximum command length for
OpenThread's CLI using Zephyr's shell, which is currently fixed to
256 characteres. This limitation was not enough for certain allowed
OpenThread commands, like some variants of 'ot dataset mgmtsetcommand'.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
When `z_get_fd_obj_and_vtable()` function returns NULL (no valid entry
in the FD table for the socket), there is no need for further usermode
checks on the `ctx` pointer, as there is nothing to invalidate in that
case.
Fixes#25990Fixes#25991
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The original sockets system calls used file descriptors which
were actually net_context pointers. For all socket system calls,
any calls from user mode would check if the caller had permission
to use the net context.
This was later changed to not stuff net_context pointers into file
descriptors, but all the permission checking was unintentionally
lost, allowing all threads on the system to
read/write all socket file descriptors in the system at will, with
no way to isolate applications running on the same microcontroller
from each other's network activity.
This patch restores the permission checks on network context objects
for socket system calls that originated from user mode.
The call to z_object_recycle() was never removed from
zsock_socket_internal(); this is again leveraged to grant the
caller who opened the socket permission on the net_context
associated with the returned file descriptor.
To ensure that all socket calls do this checking, all uses of
z_get_fd_obj_and_vtable() have been routed through get_sock_vtable().
Objects have initialization state set and thread permissions
reset to just the caller in common zsock_socket() code.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The socketpair file descriptor context objects are heap allocated
and not drawn from a static pool. Register these as kernel objects
when we create them if user mode is enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Zephyr running on MPU devices have a different memory model than
process-oriented OSes like Linux and require a method to set
kernel object permissions on a file descriptor's underlying
context object. Add this, and a test to show that it is working.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Used for permission validation when accessing the associated file
descriptors from user mode.
There often get defined in implementation code, expand the search
to look in drivers/ and subsys/net/.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If we are calling sendmsg() without any aux data, then msg_controllen
is 0 and msg_control is NULL. Check these allowed values properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are calling sendmsg() for a connected socket, then msg_namelen
is 0 and msg_name is NULL. Check these allowed values properly.
Also modify unit tests so that we test this scenario.
Fixes#25925
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In this, case is_nonblock is false and will_block is true.
Therefore, we *may* block, and furthermore we *expect* to
block. Checking is_nonblock is, in fact, redundant, and
passing K_FOREVER to k_sem_take() is justified.
Fixes#25727
Coverity-CID: 210611
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
OpenThread moved from 4 to 5 debug levels and it was not possible
to configure all of them with Kconfig.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
There was a possible race condition between sock_is_nonblock()
and k_sem_take() in spair_read() and spair_write() that was
mitigated.
Also clarified some of the conditional branching in those
functions.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Replace:
DT_FLASH_ERASE_BLOCK_SIZE ->
DT_PROP(DT_CHOSEN(zephyr_flash), erase_block_size)
DT_FLASH_WRITE_BLOCK_SIZE ->
DT_PROP(DT_CHOSEN(zephyr_flash), write_block_size)
As this allows us to phase out the old generator.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Adding RFC1350 compliant support for TFTP Client in Zephyr. The
current implementation is minimal and only supports the ability
to get a file from the server.
Things for the future include support for putting files to
server and adding support for RFC2347.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
So far socket errors reported by poll/recvfrom were ignored, which could
lead to an unexpected behavior when socket was left in an undefined
state.
Fix this, by requesting a re-registration in the LWM2M state machine,
which will close the faulty socket and open a new one. Note, that simply
closing and re-opening a socket in the lwm2m engine would not work,
since this would silently invalidate any open observations on the
lwm2m server side (due to port number change). Triggering a fresh
registration will notify the server to update its observations.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
SNTP implementation defined symbols like "MODE_MASK", which can easily
conflict with similary laxly defined symbols in other modules, and
indeed, we hit a case like that (below). So, prefix these symbols
consistently with "SNTP_", until more clear private namespacing
convention are made pervasive in Zephyr.
subsys/net/lib/sntp/sntp_pkt.h:14: error: "MODE_MASK" redefined
include/arch/arm/aarch32/cortex_a_r/cpu.h:17: note: this is the
location of the previous definition
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
On OT network with poor coverage, very often request/observe packets
doesn't get it's ACK and consumes from pendings/replies/message stacks.
In such cases when LWM2M engine tries to recover by resetting its state,
it fails because of lack of free messages.
Signed-off-by: Kiril Petrov <retfie@gmail.com>
