Replace CONFIG_ESPI_SLAVE by CONFIG_ESPI_TARGET
Replace CONFIG_ESPI_SAF by CONFIG_ESPI_TAF
Replace ESPI_BUS_SAF_NOTIFICATION with ESPI_TAF_BUS_NOTIFICATION in API
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Update references to devicetree chosen properties and how devicetree nodes
should be defined in order to enable the new HCI drivers.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
These samples were enabled for an nRF board, even though there is no
upstream support for the feature. Additionally the sample.yaml files
were forcefully disabling any in-tree HCI drivers, making it impossible
to use e.g. qemu with an external HCI controller. Simply remove the nRF
board from the list, as well as the odd Kconfig HCI driver options.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Add support for using an UART instead of the native controller. This is
accomplished with a custom DTS overlay for the tests that require it.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Apps shouldn't try to call bt_recv() since that's not a public API and
is going completely away with the new HCI driver API. Just inject the
buffer directly into the k_fifo which we anyway have access to in this
app.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Refactored the unicast audio client sample to use a
separate thread for TXing, rather than the system workqueue.
This allows us to do blocking waiting operations like
buf = net_buf_alloc(&tx_pool, K_FOREVER);
and also splits the responsibility of TXing to a new
file as well.
LC3 handling have also been moved to a new file, so
that it does not pollute the source code for non-LC3
supported builds. This also fixes various issues and
improves the LC3 handling in the sample.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The unicast audio server is actually decoding in the RX
thread, and not the system workqueue.
This is a temporary fix, as ideally it would do the
decoding in a separate thread to avoid taking too much
time in the system threads.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Include new AT shell alongside the PM device shell to allow
for powering back up the modem after the sample has completed
to test out the at shell.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Introduce a sample for BlueNRG-based devices to support interaction with
ST BlueNRG GUI application based on U(S)ART protocol.
Signed-off-by: Ali Hozhabri <ali.hozhabri@st.com>
Adding bt_tester support.
Adding bt_tester app build
with Twister for frdm_rw612 board
Fix failing tests/samples due to unsufficent MPU ressources
by releasing unnecessary MPU regions.
Twister builds added on peripheral/central ht and
enabled Power manager on those examples to cover
the CI builds with PM enabled.
Signed-off-by: Yassine El Aissaoui <yassine.elaissaoui@nxp.com>
Remove pre hardware model v2 overlays present for RT11xx boards, that
were missed in the HWMv2 migration
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Unmount and remount filesystem during init, to verify that filesystem
remount works as expected.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Use lower IRQ proirities for SoC peripherals, example UART,
to reduce ISR latencies on the IRQs processed by the
Controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add preliminary support for nRF54L15 SoC. This commit does
not support Controller Random Number Generation and
Controller Cryptography (AES-128 encryption) commands, nor
does it support encrypted connections.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
BT_GAP_ADV_SLOW_INT_MIN and BT_GAP_ADV_SLOW_INT_MAX represent 1s and 1.2s,
respectively, in the extended advertising context, where the bit interval
is 0.625 ms. Using them for periodic advertising will result in a range
of [2s, 2.4s], as the bit interval for periodic advertising is 1.25ms.
Instead, BT_GAP_PER_ADV_SLOW_INT_MIN and BT_GAP_PER_ADV_SLOW_INT_MAX
should be used in this sample, and the range will become [1s, 1.2s].
Signed-off-by: Yuxuan Cai <yuxuan.cai@nordicsemi.no>
The sample won't build with PSA crypto enabled on non-secure platform,
causing disturbances in the CI.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
A few samples were not limiting the CI execution scope in any reasonable
way, they should at least limit the execution to platforms that support
netif capability.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Removes references to old tool documentation and refers users to
the list of supported applications instead
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
When the broadcast source unexpectedly disappears then the broadcast
sink does a remove source command and resets.
Signed-off-by: Jens Rehhoff Thomsen <jthm@demant.com>
Enable execution of ADC driver tests on nrf54l15.
Overlay file for nrf54l15 already exists.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Align the name of the ETH PTP Config Status values
depending on the stm32HAL serie
to be the HAL_ETH_PTP_NOT_CONFIGURATED/HAL_ETH_PTP_CONFIGURATED
or HAL_ETH_PTP_NOT_CONFIGURED/HAL_ETH_PTP_CONFIGURED
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Support NXP ENET_1G on mimxrt1170_evk/mimxrt1176/cm7 platform.
Added test configuration sample.net.zperf.nxp_enet1g and
documented the usage of the ethernet driver with ENET_1G
peripheral.
Fixes: #66348
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Define the configuration to run the code_relocation
application on the external memory dual quad flash
of the stm32h745i/stm32h750b disco kits in XIP
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Get the flash device from the node compatible, instead of an alias.
This removes the need for the `spi-flash0` alias on every board with one
of these drivers.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Update the sample to use a camera shield with a camera chosen node.
This is not only because the camera nodes in the mimxrt1064 device
tree has been now moved to a separate mt9m114 shield but also to
make the sample more generic.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
The default resolution of mt9m114 camera is now changed to 480x272.
Update the sample documentation to reflect this change.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Moves the rtio_ prefixed lockfree queues to sys alongside existing
mpsc/spsc pbuf, ringbuf, and similar queue-like data structures.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Add testcases for rk043fn02h_ct and rk043fn66hs_ctg shields to display
and LVGL samples, so these testcases will be built by CI.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This sample demonstrates how gpio pins can be used to power on
the system after a Poweroff, just like a reset pin.
The user only needs to add the STM32_GPIO_WKUP flag to the gpio pin
in "gpios" property of a DT device such a button or a sensor.
The samples Powers off the system after a delay then the user can power it
on with the user button that has the STM32_GPIO_WKUP flag in DT.
Only works on STM32 boards that support Zephyr POWEROFF
(U5, WL, WB, & L4 SoC series), & also have a user button whose GPIO pin
is associated with a wake-up pin (see PWR node in SoC dtsi file).
Signed-off-by: Abderrahmane Jarmouni <abderrahmane.jarmouni-ext@st.com>
Deprecate the CAN controller bus-speed/bus-speed-data properties and rename
them to bitrate/bitrate-data to match the terminology used in other CAN
devicetree properties and the CAN subsystem API.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
