So far, `LWM2M_RD_CLIENT_EVENT_BOOTSTRAP_TRANSFER_COMPLETE` event was
reported before the final ACK for the Bootstrap Finish was sent from the
client side. This could cause delays in the ACK sending, in case the
application wanted for instance to store the received data in flash.
Fix this, by reporting the
`LWM2M_RD_CLIENT_EVENT_BOOTSTRAP_TRANSFER_COMPLETE` event on the next
state tansition (before the actual registration starts).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
"Public Key or Identity" resource is of opaque data type, therefore it's
not correct to assume it will be a NULL terminated string (the existing
servers, for instance Leshan, does not include NULL terminator). Use the
actual size associated with the resource instead.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So far, the resource instance structure kept only the information about
the buffer length provided to the resource (in the `data_len` field).
While this approach might be enough for integer resources, where the
actual data size is fixed, it did not work for opaque resources. It is
impossible to determine the actual opaque resource length after it's
been written into.
Fix this, by replacing the current `data_len` field of the
`lwm2m_engine_res_inst` with `max_data_len`, indicating the buffer
size, and making the `data_len` field to hold the actual data size of
the resource.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently, after `CONFIG_LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP` is enabled,
the LwM2M engine will initiate bootstrap procedure on each run. This
approach limits the flexibility of the application, as it's not always
necessary to go over the bootstrap procedure (for instance, the
application may decide to store the security object obtained during the
bootstrap in flash, and restore it on boot).
Fix this by introducing an additional `flags` parameter to the
`lwm2m_rd_client_start()` function, which provides information whether
to run bootstrap in the current session or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So far, the LwM2M state machine started in the `ENGINE_INIT` state,
which made it exectue the registration/bootstrap registration even when
`lwm2m_rd_client_start()` was not called. With a new `ENGINE_IDLE`
state, the state machine can wait for the application to actually start
the client before proceeding. It also makes sense to stay in the
ENGINE_IDLE state after successfull deregistration, until the
application restarts the client.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit fixes PUSH FOTA when opaque content-format is used.
This consists of the following fixes:
* Moved `struct block_context` to a private header, so that it can be a
part of `struct lwm2m_input_context`. This allows content decoders to
make use of the block context data.
* Removed faulty `get_length_left` function from the plain text
decoder, and replace it with coap_packet_get_payload() to obtain the
actual payload size.
* Introduce `struct lwm2m_opaque_context` as a part of block context,
which allows to keep track of opaque data download progress.
* Simplify `lwm2m_write_handler_opaque()` function. It will now only
make calls to `engine_get_opaque` - it's the decoder responsibility
to update the opaque context according to it's content format (for
instance TLV decoder should only update it with the actual opaque
data size, not the whole TLV).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace all calls to the assert macro that comes from libc by calls to
__ASSERT_NO_MSG(). This is usefull as the former might be different
depending on the libc used and the later can be customized to reduce
flash footprint.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
Using zephyr's internals zsock_ calls make mqtt library more compatible,
now it does not depend on NET_SOCKETS_POSIX_NAMES.
Signed-off-by: Jan Pohanka <xhpohanka@gmail.com>
This commit adds additional Kconfigs that allow for changing
configuration values for the Zephyr port in OpenThread.
Those values are:
- number of the internal OT message buffers
- number of the state change callbacks
- number of the EID-to-RLOC cache entries
- size of the NCP buffer
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
MQTT client state is protected using mutex. That mutex however is
temporarily unlocked when calling event callbacks. This means that in
client_disconnect() transport can already be disconnected, but without
marking it as such in client->internal.state.
When mutex is unlocked in event_notify() function, then there are two
possible paths of failure:
1) First possibility is when RX and TX are called from two separate
threads, so that the other thread gets resumed and functions like
verify_tx_state() (e.g. in mqtt_publish()) allow to continue
communication over disconnected medium.
2) Another possibility is that user calls mqtt_abort() or
mqtt_disconnect() in event handler.
In both cases MQTT library tries to send or receive data, possibly
followed by second close() of underlying file descriptor.
Prevent using disconnected transport by clearing MQTT client state right
after calling mqtt_transport_disconnect(), without releasing mutex, even
for a while.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Since commit b3a1ede830 OpenThread uses the Zepyhr settings submodule
instead of writing to the flash directly. The flash.c file is not
compiled anymore, so let's just remove it. Also remove the
OT_PLAT_FLASH_PAGES_COUNT Kconfig option which was solely used by that
file.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
support longer name like urn:dev:ops:{OUI}-{ProductClass}-{SerialNumber}
or urn:imei-msisdn:###############-###############
Signed-off-by: Pascal Brogle <pascal.brogle@husqvarnagroup.com>
If there is no space in the sending window, then return -EAGAIN
so that the caller may try later.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we run out of network buffers and cannot send data, and if
we have a blocking socket, then wait until new buffers are
available before returning. As this might lead to deadlock,
wait only max 10 seconds and return ENOMEM if we cannot get
buffers in a reasonable amount of time.
Fixes#28216
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Change so that the caller of lwm2m_init_message is
responsible for generating a message id and remove message id generation
from lwm2m_init_message. Prevents generating a new id when the caller's
intent is to init a message with id 0.
Fixes#28283
Signed-off-by: Pascal Brogle <pascal.brogle@husqvarnagroup.com>
message id 0 and token 0 have special semantics in the lwm2m engine,
they are used to request generation of new id, mark them as such.
Signed-off-by: Pascal Brogle <pascal.brogle@husqvarnagroup.com>
The timeout variable in `dtls_rx()` was initialized improperly.
Coverity ID: 214219
Fixes#28161
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The default string representing Sensor Type resource in Generic IPSO
object would not fit into the predefined buffer. Increase the buffer
size and add extra BUILD_ASSERT to detect this situation.
Coverity ID: 214225
Fixes#28164
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The timeout log error message condition in wrong. When the timout
happens the "count == -1" and the condition is invalid.
This commit fixes it.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Fix for a problem in current lwm2m firmware object implementation.
Transfer should not begin when an empty string is received.
Signed-off-by: Marin Jurjevic <marin.jurjevic@hotmail.com>
This new option allows to include `sockets_tls.c` into the build when
socket offloading is enabled.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Given that the offloaded poll handling differs from the poll handling of
native sockets (entire poll function call is offloaded), some
adjustements were needed to make TLS socket work with offloaded poll
calls.
To achieve this, in case socket offloading is used, instead of jumping
directly to the offloaded poll call, a TLS wrapper for the offloaded
poll will be called. This wrapper will do additional checks at the
mbedtls level, to verify that the event is only notified to the caller
when the application data is available (i. e. not to report events
during handshake or when partial data is received, not ready to
decrypt).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Separate TLS sockets implementation from net_context layer. Instead of
calling net_context functions directly, create an underlying TCP/UDP
socket, and call socket functions on it instead. This results in a
simpler design, where we don't need to duplicate specific parts of code
from the native socket implementation. Additionally, this allows to use
a different TCP/UDP stack underneath (i. e. when sockets offloading is
used).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit adds helper function to verify protocol, which was done in
two different places in the code. The function returns the underlying
protocol information on success.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Entropy device, as being unique here, does not need to be passed through
mbedtls and can instead set static locally.
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Following are the changes to variable names that are matching
with tag names (Rule 5.7 violations)
In kernel.h, event_type is matching with a tag name in
lib/os/onoff.c. Added a _ prefix to event_type and
also to the macro argument names.
In userspace.c, *dyn_obj is matching with the tag name
dyn_obj in the file itslef. Changed it to dyn
In device.h, device_mmio.h, init.h and init.c,
changed the *device to dev. Except for one change in
init.h
Signed-off-by: Spoorthy Priya Yerabolu <spoorthy.priya.yerabolu@intel.com>
Add more tests to verify that we discard malformed packets.
In order to simplify the testing, separate message validation to
dns_validate_msg() function in resolve.c. Allow that function to
be called from unit test. This way we can construct invalid DNS
messages in unit test and verify that they are discarded when
needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ANCOUNT has nothing to do with label count so remove the
original while loop and just go through all the labels until
we have read all of them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is not possible with valid DNS messages but is possible if
we receive malformed DNS packet.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to create SOCK_DGRAM type AF_PACKET socket. This
allows user to send raw IP packets without specifying
L2 (like Ethernet) headers.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In 'struct coap_resource' path description:
- the plus symbol represents a single-level wild card in the path;
- the hash symbol represents the multi-level wild card in the path.
This change keeps compatibility with RFC 7252 but allows handling
multiple requests in single function.
Signed-off-by: Eug Krashtan <eug.krashtan@gmail.com>
-Wimplicit-fallthrough=2 requires a fallthrough comment or a compiler
to tells gcc that this happens intentionally.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Given the comment in `ipv6_event_handler`, the init function shall wait
for the last added IPv6 address to be confirmed with DAD. This is
contrary with current logic, which will only wait for the first address
to be confirmed.
This commit adds a break statement in the loop, not to overwrite the
recent address to verify with an older one.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When verifying the parameters check NULL value separately.
This will avoid nasty warning message to be printed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add function pointer to vtable and use that directly instead of
routing via ioctl() call. This is done as we are trying to get
rid of ioctl() calls in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Do not route close() calls via ioctl() as that is error prone
and quite pointless. Instead create a callback for close() in
fdtable and use it directly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit allows let build zperf sample with overlay-netusb.conf.
USB subsystem must be enabled by the application.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Instead of just showing network interface pointer, print also
network interface index. This helps debugging.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
OT_RADIO_CAPS_SLEEP_TO_TX was added as a radio capability
for ieee802154 radio. Waiting on RX state before transmission
is alternative condition to OT_RADIO_CAPS_SLEEP_TO_TX support
as it was a result of OpenThread architecture and is actually
not needed in the Zephyr. Such change lets to start transmission
faster and lower SED device power consumption in active state
about 30%.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
