Don't use the ATT structs that has contains only a flexible array
member. This is not supported by C99 standard, only through GNU C
extension with zero length array.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Changes the callbacks for periodic sync callbacks such that multiple
applications can register callbacks, similar to the connection and
scan callbacks.
This change will make it easier to support the PAST feature, as
PA syncs make be created by the controller which then notifies
the host, and thus the application (if callback registered).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Replace all calls to the assert macro that comes from libc by calls to
__ASSERT_NO_MSG(). This is usefull as the former might be different
depending on the libc used and the later can be customized to reduce
flash footprint.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
The scan callbacks may be NULL, which would cause an error if
e.g. the timeout callback wasn't set and the scan terminates after
a timeout.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In bt_set_name we already get name length so let's use it in strncpy
Also fix warning with enable -Wstringop-truncation
Signed-off-by: Ilya Averyanov <a1ien.n3t@gmail.com>
Instead of doing slow (non-fast) scan when syncing to
a PA, it will now do a fast scan, which drastically reduces the
time it takes to create the sync. The application may
still do explicit slow scan if wanted.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When the application cancels the PA sync, it would update
the scan before clearing the BT_PER_ADV_SYNC_SYNCING flag
which cause the scan to always start again.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix bt_le_oob_get_local and bt_le_ext_adv_oob_get_local stuck forever
waiting for the sc_local_pkey_ready semaphore when SC HCI commands
are not supported in the controller.
By using the le_sc_supported helper function the runtime check of HCI
commands and the feature check of CONFIG_BT_SMP_OOB_LEGACY_PAIR_ONLY
is combined to be handled int the same way.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move the le_sc_supported helper function up in the source file so that
it can be re-used in other places without a forward declaration.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
If hannel don't have alloc_buf and the RX MTU is configured to require
segmentation this warn the user and truncate the RX MTU.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Accourding to the spec the CCC descriptor may occur in any position
within the characteristic definition after the Characteristic Value.
Fixes#28324
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix bug in device name shortening handling leading to memory
corruption.
This is triggered by an underflow in the length field of the shortened
name when set_data_len + 2 > set_data_len_max.
Fixes: #27693
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Ignore error when failing to set the passive scanner private address.
This can happen because in between the time we checked if the
advertiser was enabled and the time we execute the set random address
command the state of the advertiser could have changed in the
controller, and we only set the state once the command has completed
in the controller.
Fixes: #25672
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix not setting NRPA before starting scanner.
Occurs with BT_PRIVACY=n and BT_EXT_ADV=y
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Re-structures the `bt_conn_recv()` to support more generic appending of
new ACL data. This also handles the possibility of receiving 0-length
ACL_START and ACL_CONT fragments, whilst maintaining existing
error-checking functionality.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Fixes issue #26900.
A controller may fragment an L2CAP SDUs in any way it sees fit,
including fragmenting the L2CAP header. Likewise, the receiving
controller may send the fragmented header as ACL data to the host.
The Zephyr host assumed that a `BT_ACL_START` was at least 2 bytes long,
and consequently read the two-byte length field from the buffer without
length checks.
This commit allows the `BT_ACL_START` to be less than two bytes,
updating the `conn->rx_len` onces the `BT_ACL_CONT` with the remaining
part of the length field has been received.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
When attempting to bind a channel if it fails the code will attempt to
cleanup calling bt_iso_cleanup which expects connections of
BT_CONN_TYPE_ISO.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
ISO connection does not initialize its tx_complete_work nor it uses for
anything so calling into tx_notify will likely cause a crash.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
the adv instance should be delete correctly if advertise fail,
Otherwise the instance will unable to allocate if start the legacy again
Signed-off-by: chao an <anchao@xiaomi.com>
Add back call to LE Write Suggested Default Data Length
command so that new connections, receiving Data Length
Update procedure before local device can auto initiate, can
respond with the suggested default data length Tx octets
and Tx time.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This introduces bt_gatt_attr_get_handle which can be used to resolve
handles of static attributes.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Make it actually give the original pointer to the attribute and its
resolved handle so static attributes don't need an extra lookup.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This optimizes the lookups to skip ahead when attribute pointer is not
located within service array.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds supports for ISO packets so then can be transmitted and
received with hci_raw driver.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Allow the application to add subscription without resubscribing.
This is needed for persistent bonds that can go to deep sleep and
turn of the RAM or power-cycle.
In this case the application as a GATT client must have a way to add
the subscription callbacks back to the stack before the GATT server
sends notifications.
This should preferable be able to be done before even connecting
since the notifications can arrive immediately after connecting to
the peer.
The stack cannot persist this on it's own since it must remember the
function pointers for the callback functions. Storing these in
persistent storage would not be compatible with a Device Firmware
Upgrade (DFU) solution.
Fixes: #21798
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor the gatt_sub_add function to be similar in structure to how
find_cf_cfg is implemented. This is so that a subscription can be added
without an active connection.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add handling of the HCI_Hardware_Error event to log the hardware code.
This event was unmasked in set_event_mask.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
When lazy loading of CCCs are enabled there is no settings set handler
register for the 'bt/ccc' key, this means that the settings set handler
for 'bt' key is called instead. This handler does not know what to do
for the 'ccc' subkey, and returns -ENOENT for the entry.
This results in an error message logged by the settings subsystem.
"E: set-value failure. key: bt/ccc/f8c39e2f98210 error(-2)"
Fix this by providing an empty handler for the 'bt/ccc' key when
Lazy Loading feature is enabled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix periodic advertising delete implementation, to not
NULL the callback pointer when deleting the instance so
that the application's terminate callback can be called
thereafter.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A build assert in dummy.c lists the following requirement:
[...] receive thread priority shall be higher than the Bluetooth
Host's Tx and the Controller's receive thread priority.
This is required in order to dispatch Number of Completed Packets
event before any new data arrives on a connection to the Host threads.
The drivers uses a priority that is equal to the Host TX thread,
and since they don't use the CONFIG define that is only available
to the controller then this BUILD_ASSERT will not catch the
requirement.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Added a callback that lets an application get write error
(if any) when subscribing to a gatt characteristic.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Fix option USE_IDENTITY for bt_le_ext_adv_* API.
The random static identity address that was set in bt_le_ext_adv_create
was overwritten in bt_le_ext_adv_start in the call to
le_adv_set_private_addr.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
enable CONFIG_BT_SMP_OOB_LEGACY_PAIR_ONLY:
In function `bt_le_oob_get_local':
subsys/bluetooth/host/hci_core.c:8878:
undefined reference to `bt_smp_le_oob_generate_sc_data'
Signed-off-by: chao an <anchao@xiaomi.com>
The PA sync is now "deleted" (i.e. flags reset) before
the terminated callback is called, so that is
possible to create PA sync in the callback. One flag
was already cleared before for this reason, but one
other flag is also required, so we just clear
everything now.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Removed the check for explicit scanning, such that
an application may create a PA sync while explicitely
scanning.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
If `CONFIG_BT_CENTRAL` was enabled and the device was not scanning
or connected, then `bt_le_per_adv_sync_create` would not start
scanning for periodic advertisers.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Mark the ram version of the ccc_cfg as free after ccc has been
stored when a bonded device disconnects.
If the device use lazy loading of settings then ccc_cfg was not
cleaned up properly when a bonded device disconnects. This
resulted in the ccc system ran out of ccc_cfg resources after
having disconnected CONFIG_BT_MAX_CONN times.
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
Step1: Move bt_gatt_disconnected() to avoid forward declarations which
otherwise would be needed by a fix to lazy loading cleanup on
disconnect in step 2.
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
Since bt_l2cap_send_cb can fail returning its error is not enough as
the buffer has been modified to add the headers, so this save the state
before calling bt_conn_send_cb and takes a reference so it can be
restored its original state in case of error.
Fixes#27434
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-Wimplicit-fallthrough=2 requires a fallthrough comment or a compiler
to tells gcc that this happens intentionally.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Elevate connections always to security mode 1 level 4 when
Secure Connections Only Mode has been enabled in the Security Manager.
Elevate connections always to security mode 1 level 3 when
Legacy pairing with OOB only has been enabled in the Security Manager.
Fixes: #27338
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
