Exclude the stm32h7 target boards to this samples/subsys/settings
because it does not apply for flash sector flash size larger
than 64K : all those stm32h7 mcu have sector size of 128K
The settings_subsys_init will fails (-33 DOM errno ) when it checks
nvs_sector_size > UINT16_MAX in settings_backend_init()
of the subsys/settings/src/settings_nvs.c
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add Kconfig option to use dedicated workqueue in CDC ACM but use the
system work queue in CDC ACM by default.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This commit reflects a difference between FE310-G000 and FE310-G002 SoCs,
since only the latter supports PMP. The result of that is the split of the
HiFive1 board into two separate targets, since the HWMv2 right now assumes
that board revisions share the same SoC.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
For boards frdm_mcxn947 and mcx_n9xx_evk test NVS in internal flash in
addition to external QSPI flash. Also enable the NVS subsystem on
these boards for Twister.
Signed-off-by: Derek Snell <derek.snell@nxp.com>
Some IPM devices return an error if we request to transfer data.
Use IPM_MAX_DATA_SIZE to determine if the virtio ID can be transferred
through the IPM device.
Send data to IPM only if CONFIG_IPM_MAX_DATA_SIZE is not zero.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Current code does not build on Cortex-M0, seems like it does not like
subs:
Error: instruction not supported in Thumb16 mode -- `subs r3,#1'
Adding a unified assembler language declaration in the snippet seems to
fix the problem, also add an M0+ board so this is tested in CI.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Sets CONFIG_TIMESLICE_SIZE=0 for tests that previously expected to run
without timeslicing enabled, and now fail with the default
CONFIG_TIMESLICE_SIZE=20. Note that timeslicing functionality is still
included, but no actual timeslicing is performed.
Signed-off-by: Daniel Mangum <georgedanielmangum@gmail.com>
Reverse the changes the affected API and add adjust the sample to the new
dynamic and static variations.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
Add the dts and config overlay for imx8ulp_evk//adsp
to have the openamp_rsc_table sample working on
HiFi4 DSP from i.MX8ULP.
Since openamp_rsc_table sample uses IPM API and i.MX8ULP
has a mbox driver for messaging unit, we need a mailbox node.
This will load the ipm_mbox driver that exposes the IPM
interface while using a MBOX driver in the back-end.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Add a sample for the UART bridge driver using a USB CDC-ACM UART and a
normal one. Demonstrates how to do settings propagation (bitrate
changes) and multiple instances.
The sample needs to know what specific UART are available on each board,
so unfortunately any additional board needs its own overlay.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The display blanking API mentions that display_blanking_on
and display_blanking_off should return -ENOSYS if it is not
implemented by the driver. It should not be considered as
an error since it might not be needed in order to have the
display work correctly.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Some OpenThread logs were moved from L2 to the OpenThread module,
so enable logging from there to keep previous logging visibility.
Signed-off-by: Arkadiusz Balys <arkadiusz.balys@nordicsemi.no>
Add usbd test feature to samd21/samr21_xpro boards.
Add samr21_xpro board to integration_platforms in a few samples.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Disable GPD for MCUBoot build, as it cannot be
reinitialized later in application (SDFW does not
support reinitialization).
Also, remove the GPD disabling from the mcumgr sample
for nRF54H20 iron board app - it was the reinitialization
that caused problems.
Signed-off-by: Michal Kozikowski <michal.kozikowski@nordicsemi.no>
- Remove duplicated conf/.overlay configuration for
mimmxrt1170_evk A and B revisions that have the same content.
- No change if .conf/.overlay have different content.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
- Sets MAIN_STACK_SIZE in prj.conf to 2048 (default is 1024)
to avoid possible stack overflow
and adding new .conf files per board.
- Deletes existing board .conf files, as they are not needed anymore.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Remove the source of non-determinism during emulation
by keeping terminal events reproducible between runs.
By using the mechanism of precise pause in Renode emulator
every interaction with terminal happens at the same virtual time
from the perspective of an emulated system, hence makes it independent
of the host. Otherwise the result of a test is susceptible to
the load on the host and robot process keywords' timing.
Renode emulator supports precise pausing when specified sequence of
characters is received on a terminal. Besides that,
char delay parameter is specified to set time interval between
consecutive characters entered in the terminal.
'Start Emulation' keyword is redundant, because 'Wait For'
keywords automatically continue emulation up to the nearest pause
event (e.g. matched pattern on the terminal).
Signed-off-by: Marek Slowinski <mslowinski@antmicro.com>
Remove the dependency on the system heap existing when enabling
`ZBUS_RUNTIME_OBSERVERS`. Instead the previously allocated memory is
required to be provided to `zbus_chan_add_obs` (which can still be
allocated through malloc).
Signed-off-by: Jordan Yates <jordan@embeint.com>
Allow compiler optimizations to remove High-Speed handling code. Knowing
that maximum operating speed is Full-Speed allows to reduce bulk buffers
from 512 to 64 bytes. More RAM optimizations are possible but this
commit only gets the low hanging fruits.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Having the log level set at debug causes a message to be printed
every time a mailbox message is sent or received. If we log this
using the RPMSG shell, then each message sent generates another
message, causing an an infinite message loop.
Do not set the level to debug by default, allow the level to
be set by the config LOG_DEFAULT_LEVEL.
Signed-off-by: Andrew Davis <afd@ti.com>
If an option is set in the project default configuration it does not
need to be set again in a board specific configuration overlay. Remove
instances of this.
Signed-off-by: Andrew Davis <afd@ti.com>
The message data field is currently empty, this works for some as the all
available virtqueues can be signaled when any message comes in on the host
side. For TI Mailbox and RemoteProc Linux drivers we do check the content
and expect the message to contain the correct Vring ID to signal.
Signed-off-by: Andrew Davis <afd@ti.com>
USB remote wakeup capability is a common feature of keyboards,
allowing them to wake up a suspended host. Currently there is no USB sample
that demonstrates remote wakeup, which makes basic evaluation of the
functionality non-trivial.
Modify the hid-keyboard sample with a minimalistic solution
of demonstrating remote wakeup capability. While it is not required to have
been configured prior to suspend to issue a wakeup request, from usability
perspective I'd say it makes sense.
Signed-off-by: Benedek Kupper <kupper.benedek@gmail.com>
remove the FATAL_ERROR message, and leave it just as a message.
also enhance filter for this case with "1pc0" anmd "1pc1"
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
ESP32xx appcpu board should only be built with procpu.
Stand alone AMP support makes no sense.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
