Move the creation of the multicast solicited node address outside the
loop. There is no functional change but it prepares for some future
changes.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Instead of setting the default_stream when we initiate
the configure operatio, we set it when it has succeded.
In case that the codec configure fails, the stream should
not really be considered configured as the default.
This also ensures that the default_stream is set when
using the CAP shell commands.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Currently, it is not possible to use hawkbit with code that requires
POSIX_API to be set due to the dependency on NET_SOCKETS_POSIX_NAMES.
Since a lot of other code has already been moved to `zsock_`, this
commit does the same for hawkbit.
Co-authored-by: rojedag <r.ojeda@vogl-electronic.com>
Signed-off-by: Matthias Breithaupt <m.breithaupt@vogl-electronic.com>
Lwm2m firmware object have defined a write of zero length
string as a cancel operation.
So allow lwm2m_set_opaque(path, NULL, 0);
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
It may happen that CIS is scheduled in the future and did not started
yet once accepted. When ASE goes to Releasing state in such case
the ISO has to be disconnected, because otherwise ASE will stuck in
releasing state.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Since clear_lc3_sine_data references audio_send_work, it must
be declared before the clear_lc3_sine_data function.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The bt_bap_scan_delegator_find_state did not properly return the
correct receive state due to confusing return value of the
iterator function.
Modify it to use a simple bool.
This fixes all issues with "Failed to find receive state for sink"
when using the Broadcast Sink.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In the CSIP Set Coordinator verify_members we verify that
all members have unique ranks.
This was done as part of the initial loop, but it is
more efficient to do this as a separate loop as we can reduce
the number of items to compare, as well as guarding this properly
by !zero_rank.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fixes 2 issues:
1) The broadcast code would only ever get the first value, even if
the command specified up to 16 values.
2) The broadcast code is not just hex values, so hex2bin does not make
sense, and strlen + memcpy is much simpler.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When the broadcast assistant have found the expected broadcast
source it should stop scanning.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The shell_print was meant to print the address of the broadcast
source along with the broadcast_id.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The bad code field should only be printed when there is an actual
bad code, otherwise it just prints all-0s.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move BT_CTLR_SCAN_SYNC_ISO_SET to Kconfig from Kconfig.ll_sw_split
This means it can be used by other controllers and alligns with location
of other iso configs - e.g. BT_CTLR_SYNC_ISO_STREAM_COUNT
Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
Add a native way to log Host Command communication.
Use Zephyr logging system to do it. Use debug and normal levels.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Use one common function to send Host Command response. It allows
handling all response types within one function.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Add a configuration option to set Wi-Fi as default interface and also
add an API to get first available Wi-Fi interface.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Identify the Wi-Fi capability to the networking stack and also the type
of Wi-Fi (Native vs Offloaded), this helps identifying Wi-Fi interfaces
that can be used by applications.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Wi-Fi is based on L2 Ethernet, so, all drivers are registered as
Ethernet L2, but in order to distinguish true Ethernet and Wi-Fi
devices, add a L2 type within Ethernet.
Also, handle offloaded net devices that also offload Wi-Fi.
This approach is better than adding a new Wi-Fi L2 as that would mean
invasive changes which are unnecessary.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
As per table 4.2 in BAP v1.0.1, the BAP unicast client shall
support at least 2 (> 1) endpoints in either direction if it
supports that direction.
Since Kconfig does not support such requirements (0 || > 1),
this is done using a BUILD_ASSERT.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Pause and resume functionality was written into assumption
that sockets are closed before resuming.
With use new options CONFIG_LWM2M_RD_CLIENT_STOP_POLLING_AT_IDLE
or CONFIG_LWM2M_RD_CLIENT_LISTEN_AT_IDLE this is not always true.
Fix the state machine, so that on those cases, sockets are not
closed and resume is always similar like from the QUEUE mode.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add support for using X509 certificates.
Default settings use ECDSA certificates with SHA256 hash.
When different settings are required clients should overwrite
struct lwm2m_ctx->load_credentials() and
struct lwm2m_ctx->set_socketoptions()
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Most AP's are not sending proper HE triggers or stopping triggers after
sometime, so, change the default to non-triggered based TWT.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
If the remote responds with and security related error the stack tries
to increase the security level to satisfy the remote permissions.
This fixes missing ATT timer reset on security related ATT Error
Response as the ATT operation is considered as complete.
< ACL Data TX: Handle 0 flags 0x00 dlen 7
ATT: Read Request (0x0a) len 2
Handle: 0x0084
TMAS: Role
> ACL Data RX: Handle 0 flags 0x02 dlen 9
ATT: Error Response (0x01) len 4
Read Request (0x0a)
Handle: 0x0084
Error: Insufficient Authentication (0x05)
TMAS: Role
Error code: 0x05
< ACL Data TX: Handle 0 flags 0x00 dlen 6
SMP: Security Request (0x0b) len 1
Authentication requirement: Bonding, No MITM, SC, No Keypresses
= bt: bt_att: ATT Timeout
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
If connection reference is acquired from `bt_conn_lookup_addr_le` but
`bt_gatt_ccc_cfg_is_matching_conn` return false the connection was not
unreferenced properly. This commit fix the issue by unreferencing the
connection if the condition is false.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
This fixes notification callback that can be called with NULL conn
parameter when peer is being unpaired.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
When writing a test suite, it's more common to want the 'before'
hook to run in privilaged mode, even when the test is run in userspace.
Reconfigure ztest to first run the test thread callback in privilaged
mode and only enter userspace after the test rule and suite's 'before'
functions ran.
Signed-off-by: Yuval Peress <peress@google.com>
The RTT backend of the shell does not support several of the more
advanced terminal features. This commit proposes to inactivate these
features by default when RTT is selected as shell backend.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
unpair may be called from bt_unpair where addr is NULL.
One such case is the `bt clear all` shell command which
calls bt_unpair with addr = NULL, and the addr is just forwarded
to unpair which does not check for NULL.
bt_unpair allows for the addr to be NULL to clear all, but only
if SMP is enabled.
Modified the checks in bt_unpair to increase readability
and ensure that unpair is not called with NULL.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Switch the driver to the soft CSMA/CA algorithm as an intermediate
compromise for improved standard compliance (namely expontential
backoff) until true hardware support can be implemented by chaining
radio commands.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The extra ztest functionality for the posix arch
requires the host libC. Disable it if we are
building with an embedded libC.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This fixes TMAS characteristic permissions.
The characteristic shall have no security related
permissions as per TMAP_v1.0.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
